mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c

Move Samsung specific initialization and detection logic into
nand_samsung.c. This is part of the "separate vendor specific code from
core" cleanup process.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>

1 files changed, 4 insertions, 48 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 92ff6adbd7c9..fd38d59d33a6 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3832,48 +3832,13 @@ void nand_decode_ext_id(struct nand_chip *chip)
 	/*
 	 * Field definitions are in the following datasheets:
 	 * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
-	 * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
 	 * Hynix MLC   (6 byte ID): Hynix H27UBG8T2B (p.22)
 	 *
 	 * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
 	 * ID to decide what to do.
 	 */
-	if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
-			!nand_is_slc(chip) && id_data[5] != 0x00) {
-		/* Calc pagesize */
-		mtd->writesize = 2048 << (extid & 0x03);
-		extid >>= 2;
-		/* Calc oobsize */
-		switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
-		case 1:
-			mtd->oobsize = 128;
-			break;
-		case 2:
-			mtd->oobsize = 218;
-			break;
-		case 3:
-			mtd->oobsize = 400;
-			break;
-		case 4:
-			mtd->oobsize = 436;
-			break;
-		case 5:
-			mtd->oobsize = 512;
-			break;
-		case 6:
-			mtd->oobsize = 640;
-			break;
-		case 7:
-		default: /* Other cases are "reserved" (unknown) */
-			mtd->oobsize = 1024;
-			break;
-		}
-		extid >>= 2;
-		/* Calc blocksize */
-		mtd->erasesize = (128 * 1024) <<
-			(((extid >> 1) & 0x04) | (extid & 0x03));
-	} else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
-			!nand_is_slc(chip)) {
+	if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
+	    !nand_is_slc(chip)) {
 		unsigned int tmp;
 
 		/* Calc pagesize */
@@ -4001,13 +3966,10 @@ static void nand_decode_bbm_options(struct nand_chip *chip)
 	 * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
 	 * AMD/Spansion, and Macronix.  All others scan only the first page.
 	 */
-	if (!nand_is_slc(chip) &&
-			(maf_id == NAND_MFR_SAMSUNG ||
-			 maf_id == NAND_MFR_HYNIX))
+	if (!nand_is_slc(chip) && maf_id == NAND_MFR_HYNIX)
 		chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
 	else if ((nand_is_slc(chip) &&
-				(maf_id == NAND_MFR_SAMSUNG ||
-				 maf_id == NAND_MFR_HYNIX ||
+				(maf_id == NAND_MFR_HYNIX ||
 				 maf_id == NAND_MFR_TOSHIBA ||
 				 maf_id == NAND_MFR_AMD ||
 				 maf_id == NAND_MFR_MACRONIX)) ||
@@ -4202,12 +4164,6 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
 	/* Get chip options */
 	chip->options |= type->options;
 
-	/*
-	 * Check if chip is not a Samsung device. Do not clear the
-	 * options for chips which do not have an extended id.
-	 */
-	if (maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
-		chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
 ident_done:
 
 	if (chip->options & NAND_BUSWIDTH_AUTO) {