Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

    Quoting Boris:
     'This pull request contains only one notable change:
       - Addition of the MTK NAND controller driver

      And a bunch of specific NAND driver improvements/fixes. Here are the
      changes that are worth mentioning:
       - A few fixes/improvements for the xway NAND controller driver
       - A few fixes for the sunxi NAND controller driver
       - Support for DMA in the sunxi NAND driver
       - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs
       - Addition for bitflips detection in erased pages to the brcmnand driver
       - Support for new brcmnand IPs
       - Update of the OMAP-GPMC binding to support DMA channel description'

    In addition, some small fixes around error handling, etc., as well
    as one long-standing corner case issue (2.6.20, I think?) with
    writing 1 byte less than a page.

  NOR:

   - rework some error handling on reads and writes, so we can better
     handle (for instance) SPI controllers which have limitations on
     their maximum transfer size

   - add new Cadence Quad SPI flash controller driver

   - add new Atmel QSPI flash controller driver

   - add new Hisilicon SPI flash controller driver

   - support a few new flash, and update supported features on others

   - fix the logic used for detecting a fully-unlocked flash

  And other miscellaneous small fixes"

* tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits)
  mtd: spi-nor: don't build Cadence QuadSPI on non-ARM
  mtd: mtk-nor: remove duplicated include from mtk-quadspi.c
  mtd: nand: fix bug writing 1 byte less than page size
  mtd: update description of MTD_BCM47XXSFLASH symbol
  mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller
  mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver
  mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd
  mtd: pmcmsp-flash: Allocating too much in init_msp_flash()
  mtd: maps: sa1100-flash: potential NULL dereference
  mtd: atmel-quadspi: add driver for Atmel QSPI controller
  mtd: nand: omap2: fix return value check in omap_nand_probe()
  Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  mtd: spi-nor: add hisilicon spi-nor flash controller driver
  mtd: spi-nor: support dual, quad, and WP for Gigadevice
  mtd: spi-nor: Added support for n25q00a.
  memory: Update dependency of IFC for Layerscape
  mtd: nand: jz4780: Update MODULE_AUTHOR email address
  mtd: nand: sunxi: prevent a small memory leak
  mtd: nand: sunxi: add reset line support
  mtd: nand: sunxi: update DT bindings
  ...

1 files changed, 2 insertions, 14 deletions

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 64a248556d29..58329d2dacd1 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -113,12 +113,12 @@ config MTD_SST25L
 	  if you want to specify device partitioning.
 
 config MTD_BCM47XXSFLASH
-	tristate "R/O support for serial flash on BCMA bus"
+	tristate "Support for serial flash on BCMA bus"
 	depends on BCMA_SFLASH && (MIPS || ARM)
 	help
 	  BCMA bus can have various flash memories attached, they are
 	  registered by bcma as platform devices. This enables driver for
-	  serial flash memories (only read-only mode is implemented).
+	  serial flash memories.
 
 config MTD_SLRAM
 	tristate "Uncached system RAM"
@@ -171,18 +171,6 @@ config MTDRAM_ERASE_SIZE
 	  as a module, it is also possible to specify this as a parameter when
 	  loading the module.
 
-#If not a module (I don't want to test it as a module)
-config MTDRAM_ABS_POS
-	hex "SRAM Hexadecimal Absolute position or 0"
-	depends on MTD_MTDRAM=y
-	default "0"
-	help
-	  If you have system RAM accessible by the CPU but not used by Linux
-	  in normal operation, you can give the physical address at which the
-	  available RAM starts, and the MTDRAM driver will use it instead of
-	  allocating space from Linux's available memory. Otherwise, leave
-	  this set to zero. Most people will want to leave this as zero.
-
 config MTD_BLOCK2MTD
 	tristate "MTD using block device"
 	depends on BLOCK