summaryrefslogtreecommitdiff
path: root/drivers/mtd/chips/cfi_probe.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-08 10:39:20 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-08 10:39:20 -0700
commitf4e70c2e5f1406e715f6359ae341e76e5004fb98 (patch)
tree79622d866d0cb8bdb494718e11d458770aee9713 /drivers/mtd/chips/cfi_probe.c
parentea125dedbc14b305307889c40d74d564c4419851 (diff)
parentb771327a4530e7ff05ae173d4903cd70357bb803 (diff)
Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon: "Core changes: - Add a sysfs attribute to expose available OOB size Driver changes: - Remove HAS_DMA dependency on various drivers - Use dev_get_drvdata() instead of platform_get_drvdata() in docg3 - Replace msleep by usleep_range() in the dataflash driver - Avoid VLA usage in nftl layers - Remove useless .owner assignment in pismo - Fix various issues in the CFI driver - Improve TRX partition handling expose a DT compat for this part parser - Clarify OFFSET_CONTINUOUS meaning NAND core changes: - Add Miquel as a NAND maintainer - Add access mode to the nand_page_io_req struct - Fix kernel-doc in rawnand.h - Support bit-wise majority to recover from corrupted ONFI parameter pages - Stop checking FAIL bit after a SET_FEATURES, as documented in the ONFI spec Raw NAND Driver changes: - Fix and cleanup the error path of many NAND controller drivers - GPMI: + Cleanup/simplification of a few aspects in the driver + Take ECC setup specified in the DT into account - sunxi: remove support for GPIO-based R/B polling - MTK: + Use of_device_get_match_data() instead of of_match_device() + Add an entry in MAINTAINERS for this driver + Fix nand-ecc-step-size and nand-ecc-strength description in the DT bindings doc - fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page OneNAND driver changes: - samsung: use dev_get_drvdata() instead of platform_get_drvdata() SPI NOR core changes: - Add support for a bunch of SPI NOR chips - Clear EAR reg when switching to 3-byte addressing mode on Winbond chips SPI NOR controller driver changes: - cadence: Add DMA support for direct mode reads - hisi: Prefix a few functions with hisi_ - intel: + Mark the driver as "dangerous" in Kconfig + Fix atomic sequence handling + Pass a 40us delay (instead of 0us) to readl_poll_timeout() - fsl: + fix a typo in a function name + add support for IP variants embedded in the ls2080a and ls1080a SoCs - stm32: request exclusive control of the reset line" * tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits) mtd: nand: Pass mode information to nand_page_io_req mtd: cfi_cmdset_0002: Change erase one block to enable XIP once mtd: cfi_cmdset_0002: Change erase functions to check chip good only mtd: cfi_cmdset_0002: Change erase functions to retry for error mtd: cfi_cmdset_0002: Change definition naming to retry write operation mtd: cfi_cmdset_0002: Change write buffer to check correct value mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS mtd: bcm47xxpart: add of_match_table with a new DT binding dt-bindings: mtd: document Broadcom's BCM47xx partitions mtd: spi-nor: Add support for EN25QH32 mtd: spi-nor: Add support for is25wp series chips mtd: spi-nor: Add Winbond w25q32jv support mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control mtd: spi-nor: intel: provide a range for poll_timout mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig mtd: spi-nor: intel-spi: Fix atomic sequence handling mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op mtd: rawnand: use bit-wise majority to recover the ONFI param page ...
Diffstat (limited to 'drivers/mtd/chips/cfi_probe.c')
-rw-r--r--drivers/mtd/chips/cfi_probe.c42
1 files changed, 42 insertions, 0 deletions
diff --git a/drivers/mtd/chips/cfi_probe.c b/drivers/mtd/chips/cfi_probe.c
index e8d0164498b0..cf426956454c 100644
--- a/drivers/mtd/chips/cfi_probe.c
+++ b/drivers/mtd/chips/cfi_probe.c
@@ -63,6 +63,30 @@ do { \
#endif
+/*
+ * This fixup occurs immediately after reading the CFI structure and can affect
+ * the number of chips detected, unlike cfi_fixup, which occurs after an
+ * mtd_info structure has been created for the chip.
+ */
+struct cfi_early_fixup {
+ uint16_t mfr;
+ uint16_t id;
+ void (*fixup)(struct cfi_private *cfi);
+};
+
+static void cfi_early_fixup(struct cfi_private *cfi,
+ const struct cfi_early_fixup *fixups)
+{
+ const struct cfi_early_fixup *f;
+
+ for (f = fixups; f->fixup; f++) {
+ if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
+ ((f->id == CFI_ID_ANY) || (f->id == cfi->id))) {
+ f->fixup(cfi);
+ }
+ }
+}
+
/* check for QRY.
in: interleave,type,mode
ret: table index, <0 for error
@@ -151,6 +175,22 @@ static int __xipram cfi_probe_chip(struct map_info *map, __u32 base,
return 1;
}
+static void fixup_s70gl02gs_chips(struct cfi_private *cfi)
+{
+ /*
+ * S70GL02GS flash reports a single 256 MiB chip, but is really made up
+ * of two 128 MiB chips with 1024 sectors each.
+ */
+ cfi->cfiq->DevSize = 27;
+ cfi->cfiq->EraseRegionInfo[0] = 0x20003ff;
+ pr_warn("Bad S70GL02GS CFI data; adjust to detect 2 chips\n");
+}
+
+static const struct cfi_early_fixup cfi_early_fixup_table[] = {
+ { CFI_MFR_AMD, 0x4801, fixup_s70gl02gs_chips },
+ { },
+};
+
static int __xipram cfi_chip_setup(struct map_info *map,
struct cfi_private *cfi)
{
@@ -235,6 +275,8 @@ static int __xipram cfi_chip_setup(struct map_info *map,
cfi_qry_mode_off(base, map, cfi);
xip_allowed(base, map);
+ cfi_early_fixup(cfi, cfi_early_fixup_table);
+
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n",
map->name, cfi->interleave, cfi->device_type*8, base,
map->bankwidth*8, cfi->mfr, cfi->id);