mmc: sdhci-msm: add Inline Crypto Engine support

Add support for Qualcomm Inline Crypto Engine (ICE) to sdhci-msm.

The standard-compliant parts, such as querying the crypto capabilities
and enabling crypto for individual MMC requests, are already handled by
cqhci-crypto.c, which itself is wired into the blk-crypto framework.
However, ICE requires vendor-specific init, enable, and resume logic,
and it requires that keys be programmed and evicted by vendor-specific
SMC calls.  Make the sdhci-msm driver handle these details.

This is heavily inspired by the similar changes made for UFS, since the
UFS and eMMC ICE instances are very similar.  See commit df4ec2fa7a4d
("scsi: ufs-qcom: Add Inline Crypto Engine support").

I tested this on a Sony Xperia 10, which uses the Snapdragon 630 SoC,
which has basic upstream support.  Mainly, I used android-xfstests
(https://github.com/tytso/xfstests-bld/blob/master/Documentation/android-xfstests.md)
to run the ext4 and f2fs encryption tests in a Debian chroot:

	android-xfstests -c ext4,f2fs -g encrypt -m inlinecrypt

These tests included tests which verify that the on-disk ciphertext is
identical to that produced by a software implementation.  I also
verified that ICE was actually being used.

Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210126001456.382989-9-ebiggers@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

2 files changed, 273 insertions, 4 deletions

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index bbf6989e3638..a29411ca626f 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -546,6 +546,7 @@ config MMC_SDHCI_MSM
 	depends on MMC_SDHCI_PLTFM
 	select MMC_SDHCI_IO_ACCESSORS
 	select MMC_CQHCI
+	select QCOM_SCM if MMC_CRYPTO && ARCH_QCOM
 	help
 	  This selects the Secure Digital Host Controller Interface (SDHCI)
 	  support present in Qualcomm SOCs. The controller supports
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 97902616a695..5e1da4df096f 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -13,6 +13,7 @@
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/iopoll.h>
+#include <linux/qcom_scm.h>
 #include <linux/regulator/consumer.h>
 #include <linux/interconnect.h>
 #include <linux/pinctrl/consumer.h>
@@ -255,10 +256,12 @@ struct sdhci_msm_variant_info {
 struct sdhci_msm_host {
 	struct platform_device *pdev;
 	void __iomem *core_mem;	/* MSM SDCC mapped address */
+	void __iomem *ice_mem;	/* MSM ICE mapped address (if available) */
 	int pwr_irq;		/* power irq */
 	struct clk *bus_clk;	/* SDHC bus voter clock */
 	struct clk *xo_clk;	/* TCXO clk needed for FLL feature of cm_dll*/
-	struct clk_bulk_data bulk_clks[4]; /* core, iface, cal, sleep clocks */
+	/* core, iface, cal, sleep, and ice clocks */
+	struct clk_bulk_data bulk_clks[5];
 	unsigned long clk_rate;
 	struct mmc_host *mmc;
 	struct opp_table *opp_table;
@@ -1794,6 +1797,246 @@ out:
 
 /*****************************************************************************\
  *                                                                           *
+ * Inline Crypto Engine (ICE) support                                        *
+ *                                                                           *
+\*****************************************************************************/
+
+#ifdef CONFIG_MMC_CRYPTO
+
+#define AES_256_XTS_KEY_SIZE			64
+
+/* QCOM ICE registers */
+
+#define QCOM_ICE_REG_VERSION			0x0008
+
+#define QCOM_ICE_REG_FUSE_SETTING		0x0010
+#define QCOM_ICE_FUSE_SETTING_MASK		0x1
+#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK	0x2
+#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK	0x4
+
+#define QCOM_ICE_REG_BIST_STATUS		0x0070
+#define QCOM_ICE_BIST_STATUS_MASK		0xF0000000
+
+#define QCOM_ICE_REG_ADVANCED_CONTROL		0x1000
+
+#define sdhci_msm_ice_writel(host, val, reg)	\
+	writel((val), (host)->ice_mem + (reg))
+#define sdhci_msm_ice_readl(host, reg)	\
+	readl((host)->ice_mem + (reg))
+
+static bool sdhci_msm_ice_supported(struct sdhci_msm_host *msm_host)
+{
+	struct device *dev = mmc_dev(msm_host->mmc);
+	u32 regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_VERSION);
+	int major = regval >> 24;
+	int minor = (regval >> 16) & 0xFF;
+	int step = regval & 0xFFFF;
+
+	/* For now this driver only supports ICE version 3. */
+	if (major != 3) {
+		dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n",
+			 major, minor, step);
+		return false;
+	}
+
+	dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n",
+		 major, minor, step);
+
+	/* If fuses are blown, ICE might not work in the standard way. */
+	regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_FUSE_SETTING);
+	if (regval & (QCOM_ICE_FUSE_SETTING_MASK |
+		      QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK |
+		      QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) {
+		dev_warn(dev, "Fuses are blown; ICE is unusable!\n");
+		return false;
+	}
+	return true;
+}
+
+static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev)
+{
+	return devm_clk_get(dev, "ice");
+}
+
+static int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host,
+			      struct cqhci_host *cq_host)
+{
+	struct mmc_host *mmc = msm_host->mmc;
+	struct device *dev = mmc_dev(mmc);
+	struct resource *res;
+	int err;
+
+	if (!(cqhci_readl(cq_host, CQHCI_CAP) & CQHCI_CAP_CS))
+		return 0;
+
+	res = platform_get_resource_byname(msm_host->pdev, IORESOURCE_MEM,
+					   "ice");
+	if (!res) {
+		dev_warn(dev, "ICE registers not found\n");
+		goto disable;
+	}
+
+	if (!qcom_scm_ice_available()) {
+		dev_warn(dev, "ICE SCM interface not found\n");
+		goto disable;
+	}
+
+	msm_host->ice_mem = devm_ioremap_resource(dev, res);
+	if (IS_ERR(msm_host->ice_mem)) {
+		err = PTR_ERR(msm_host->ice_mem);
+		dev_err(dev, "Failed to map ICE registers; err=%d\n", err);
+		return err;
+	}
+
+	if (!sdhci_msm_ice_supported(msm_host))
+		goto disable;
+
+	mmc->caps2 |= MMC_CAP2_CRYPTO;
+	return 0;
+
+disable:
+	dev_warn(dev, "Disabling inline encryption support\n");
+	return 0;
+}
+
+static void sdhci_msm_ice_low_power_mode_enable(struct sdhci_msm_host *msm_host)
+{
+	u32 regval;
+
+	regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL);
+	/*
+	 * Enable low power mode sequence
+	 * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0
+	 */
+	regval |= 0x7000;
+	sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
+}
+
+static void sdhci_msm_ice_optimization_enable(struct sdhci_msm_host *msm_host)
+{
+	u32 regval;
+
+	/* ICE Optimizations Enable Sequence */
+	regval = sdhci_msm_ice_readl(msm_host, QCOM_ICE_REG_ADVANCED_CONTROL);
+	regval |= 0xD807100;
+	/* ICE HPG requires delay before writing */
+	udelay(5);
+	sdhci_msm_ice_writel(msm_host, regval, QCOM_ICE_REG_ADVANCED_CONTROL);
+	udelay(5);
+}
+
+/*
+ * Wait until the ICE BIST (built-in self-test) has completed.
+ *
+ * This may be necessary before ICE can be used.
+ *
+ * Note that we don't really care whether the BIST passed or failed; we really
+ * just want to make sure that it isn't still running.  This is because (a) the
+ * BIST is a FIPS compliance thing that never fails in practice, (b) ICE is
+ * documented to reject crypto requests if the BIST fails, so we needn't do it
+ * in software too, and (c) properly testing storage encryption requires testing
+ * the full storage stack anyway, and not relying on hardware-level self-tests.
+ */
+static int sdhci_msm_ice_wait_bist_status(struct sdhci_msm_host *msm_host)
+{
+	u32 regval;
+	int err;
+
+	err = readl_poll_timeout(msm_host->ice_mem + QCOM_ICE_REG_BIST_STATUS,
+				 regval, !(regval & QCOM_ICE_BIST_STATUS_MASK),
+				 50, 5000);
+	if (err)
+		dev_err(mmc_dev(msm_host->mmc),
+			"Timed out waiting for ICE self-test to complete\n");
+	return err;
+}
+
+static void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host)
+{
+	if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO))
+		return;
+	sdhci_msm_ice_low_power_mode_enable(msm_host);
+	sdhci_msm_ice_optimization_enable(msm_host);
+	sdhci_msm_ice_wait_bist_status(msm_host);
+}
+
+static int __maybe_unused sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host)
+{
+	if (!(msm_host->mmc->caps2 & MMC_CAP2_CRYPTO))
+		return 0;
+	return sdhci_msm_ice_wait_bist_status(msm_host);
+}
+
+/*
+ * Program a key into a QC ICE keyslot, or evict a keyslot.  QC ICE requires
+ * vendor-specific SCM calls for this; it doesn't support the standard way.
+ */
+static int sdhci_msm_program_key(struct cqhci_host *cq_host,
+				 const union cqhci_crypto_cfg_entry *cfg,
+				 int slot)
+{
+	struct device *dev = mmc_dev(cq_host->mmc);
+	union cqhci_crypto_cap_entry cap;
+	union {
+		u8 bytes[AES_256_XTS_KEY_SIZE];
+		u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)];
+	} key;
+	int i;
+	int err;
+
+	if (!(cfg->config_enable & CQHCI_CRYPTO_CONFIGURATION_ENABLE))
+		return qcom_scm_ice_invalidate_key(slot);
+
+	/* Only AES-256-XTS has been tested so far. */
+	cap = cq_host->crypto_cap_array[cfg->crypto_cap_idx];
+	if (cap.algorithm_id != CQHCI_CRYPTO_ALG_AES_XTS ||
+	    cap.key_size != CQHCI_CRYPTO_KEY_SIZE_256) {
+		dev_err_ratelimited(dev,
+				    "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n",
+				    cap.algorithm_id, cap.key_size);
+		return -EINVAL;
+	}
+
+	memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE);
+
+	/*
+	 * The SCM call byte-swaps the 32-bit words of the key.  So we have to
+	 * do the same, in order for the final key be correct.
+	 */
+	for (i = 0; i < ARRAY_SIZE(key.words); i++)
+		__cpu_to_be32s(&key.words[i]);
+
+	err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE,
+				   QCOM_SCM_ICE_CIPHER_AES_256_XTS,
+				   cfg->data_unit_size);
+	memzero_explicit(&key, sizeof(key));
+	return err;
+}
+#else /* CONFIG_MMC_CRYPTO */
+static inline struct clk *sdhci_msm_ice_get_clk(struct device *dev)
+{
+	return NULL;
+}
+
+static inline int sdhci_msm_ice_init(struct sdhci_msm_host *msm_host,
+				     struct cqhci_host *cq_host)
+{
+	return 0;
+}
+
+static inline void sdhci_msm_ice_enable(struct sdhci_msm_host *msm_host)
+{
+}
+
+static inline int __maybe_unused
+sdhci_msm_ice_resume(struct sdhci_msm_host *msm_host)
+{
+	return 0;
+}
+#endif /* !CONFIG_MMC_CRYPTO */
+
+/*****************************************************************************\
+ *                                                                           *
  * MSM Command Queue Engine (CQE)                                            *
  *                                                                           *
 \*****************************************************************************/
@@ -1810,6 +2053,16 @@ static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask)
 	return 0;
 }
 
+static void sdhci_msm_cqe_enable(struct mmc_host *mmc)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+
+	sdhci_cqe_enable(mmc);
+	sdhci_msm_ice_enable(msm_host);
+}
+
 static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
@@ -1842,8 +2095,11 @@ static void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery)
 }
 
 static const struct cqhci_host_ops sdhci_msm_cqhci_ops = {
-	.enable		= sdhci_cqe_enable,
+	.enable		= sdhci_msm_cqe_enable,
 	.disable	= sdhci_msm_cqe_disable,
+#ifdef CONFIG_MMC_CRYPTO
+	.program_key	= sdhci_msm_program_key,
+#endif
 };
 
 static int sdhci_msm_cqe_add_host(struct sdhci_host *host,
@@ -1879,6 +2135,10 @@ static int sdhci_msm_cqe_add_host(struct sdhci_host *host,
 
 	dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
 
+	ret = sdhci_msm_ice_init(msm_host, cq_host);
+	if (ret)
+		goto cleanup;
+
 	ret = cqhci_init(cq_host, host->mmc, dma64);
 	if (ret) {
 		dev_err(&pdev->dev, "%s: CQE init: failed (%d)\n",
@@ -2319,6 +2579,11 @@ static int sdhci_msm_probe(struct platform_device *pdev)
 		clk = NULL;
 	msm_host->bulk_clks[3].clk = clk;
 
+	clk = sdhci_msm_ice_get_clk(&pdev->dev);
+	if (IS_ERR(clk))
+		clk = NULL;
+	msm_host->bulk_clks[4].clk = clk;
+
 	ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
 				      msm_host->bulk_clks);
 	if (ret)
@@ -2532,12 +2797,15 @@ static __maybe_unused int sdhci_msm_runtime_resume(struct device *dev)
 	 * Whenever core-clock is gated dynamically, it's needed to
 	 * restore the SDR DLL settings when the clock is ungated.
 	 */
-	if (msm_host->restore_dll_config && msm_host->clk_rate)
+	if (msm_host->restore_dll_config && msm_host->clk_rate) {
 		ret = sdhci_msm_restore_sdr_dll_config(host);
+		if (ret)
+			return ret;
+	}
 
 	dev_pm_opp_set_rate(dev, msm_host->clk_rate);
 
-	return ret;
+	return sdhci_msm_ice_resume(msm_host);
 }
 
 static const struct dev_pm_ops sdhci_msm_pm_ops = {