Merge branch 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "Features:

   - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx
   - core: scans DT and assigns wakeup interrupts.  no driver changes needed.
   - core: some refcouting issues fixed and better API for that
   - core: new helper function for best effort block read emulation
   - slave framework: proper DT bindings and userspace instantiation
   - some bigger work for xiic, pxa, omap drivers

  .. and quite a number of smaller driver fixes, cleanups, improvements"

* 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits)
  i2c: mux: reg Change ioread endianness for readback
  i2c: mux: reg: fix compilation warnings
  i2c: mux: reg: simplify register size checking
  i2c: muxes: fix leaked i2c adapter device node references
  i2c: allow specifying separate wakeup interrupt in device tree
  of/irq: export of_get_irq_byname()
  i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code
  i2c: Replace I2C_CROS_EC_TUNNEL dependency
  eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated
  i2c: core: Add support for best effort block read emulation
  i2c: lpc2k: add driver
  i2c: mux: Add register-based mux i2c-mux-reg
  i2c: dt: describe generic bindings
  i2c: slave: print warning if slave flag not set
  i2c: support 10 bit and slave addresses in sysfs 'new_device'
  i2c: take address space into account when checking for used addresses
  i2c: apply DT flags when probing
  i2c: make address check indpendent from client struct
  i2c: rename address check functions
  i2c: apply address offset for slaves, too
  ...

1 files changed, 6 insertions, 31 deletions

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 2b254f3a1154..c6cb7f8f325e 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -186,19 +186,11 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 	if (count > io_limit)
 		count = io_limit;
 
-	switch (at24->use_smbus) {
-	case I2C_SMBUS_I2C_BLOCK_DATA:
+	if (at24->use_smbus) {
 		/* Smaller eeproms can work given some SMBus extension calls */
 		if (count > I2C_SMBUS_BLOCK_MAX)
 			count = I2C_SMBUS_BLOCK_MAX;
-		break;
-	case I2C_SMBUS_WORD_DATA:
-		count = 2;
-		break;
-	case I2C_SMBUS_BYTE_DATA:
-		count = 1;
-		break;
-	default:
+	} else {
 		/*
 		 * When we have a better choice than SMBus calls, use a
 		 * combined I2C message. Write address; then read up to
@@ -229,27 +221,10 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
 	timeout = jiffies + msecs_to_jiffies(write_timeout);
 	do {
 		read_time = jiffies;
-		switch (at24->use_smbus) {
-		case I2C_SMBUS_I2C_BLOCK_DATA:
-			status = i2c_smbus_read_i2c_block_data(client, offset,
-					count, buf);
-			break;
-		case I2C_SMBUS_WORD_DATA:
-			status = i2c_smbus_read_word_data(client, offset);
-			if (status >= 0) {
-				buf[0] = status & 0xff;
-				buf[1] = status >> 8;
-				status = count;
-			}
-			break;
-		case I2C_SMBUS_BYTE_DATA:
-			status = i2c_smbus_read_byte_data(client, offset);
-			if (status >= 0) {
-				buf[0] = status;
-				status = count;
-			}
-			break;
-		default:
+		if (at24->use_smbus) {
+			status = i2c_smbus_read_i2c_block_data_or_emulated(client, offset,
+									   count, buf);
+		} else {
 			status = i2c_transfer(client->adapter, msg, 2);
 			if (status == 2)
 				status = count;