mfd: dbx500-prcmu: Drop DSI pll clock functions

The DSI PLLs are handled by the generic clock framework
since ages, this code is completely unused and misleading.
Delete it.

Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

1 files changed, 0 insertions, 66 deletions

diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 5f0cfeec8b6a..0452b43b0423 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -542,72 +542,6 @@ static struct dsiescclk dsiescclk[3] = {
 	}
 };
 
-
-/*
-* Used by MCDE to setup all necessary PRCMU registers
-*/
-#define PRCMU_RESET_DSIPLL		0x00004000
-#define PRCMU_UNCLAMP_DSIPLL		0x00400800
-
-#define PRCMU_CLK_PLL_DIV_SHIFT		0
-#define PRCMU_CLK_PLL_SW_SHIFT		5
-#define PRCMU_CLK_38			(1 << 9)
-#define PRCMU_CLK_38_SRC		(1 << 10)
-#define PRCMU_CLK_38_DIV		(1 << 11)
-
-/* D=101, N=1, R=4, SELDIV2=0 */
-#define PRCMU_PLLDSI_FREQ_SETTING	0x00040165
-
-#define PRCMU_ENABLE_PLLDSI		0x00000001
-#define PRCMU_DISABLE_PLLDSI		0x00000000
-#define PRCMU_RELEASE_RESET_DSS		0x0000400C
-#define PRCMU_DSI_PLLOUT_SEL_SETTING	0x00000202
-/* ESC clk, div0=1, div1=1, div2=3 */
-#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV	0x07030101
-#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV	0x00030101
-#define PRCMU_DSI_RESET_SW		0x00000007
-
-#define PRCMU_PLLDSI_LOCKP_LOCKED	0x3
-
-int db8500_prcmu_enable_dsipll(void)
-{
-	int i;
-
-	/* Clear DSIPLL_RESETN */
-	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
-	/* Unclamp DSIPLL in/out */
-	writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
-
-	/* Set DSI PLL FREQ */
-	writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
-	writel(PRCMU_DSI_PLLOUT_SEL_SETTING, PRCM_DSI_PLLOUT_SEL);
-	/* Enable Escape clocks */
-	writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
-
-	/* Start DSI PLL */
-	writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
-	/* Reset DSI PLL */
-	writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
-	for (i = 0; i < 10; i++) {
-		if ((readl(PRCM_PLLDSI_LOCKP) & PRCMU_PLLDSI_LOCKP_LOCKED)
-					== PRCMU_PLLDSI_LOCKP_LOCKED)
-			break;
-		udelay(100);
-	}
-	/* Set DSIPLL_RESETN */
-	writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
-	return 0;
-}
-
-int db8500_prcmu_disable_dsipll(void)
-{
-	/* Disable dsi pll */
-	writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
-	/* Disable  escapeclock */
-	writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
-	return 0;
-}
-
 u32 db8500_prcmu_read(unsigned int reg)
 {
 	return readl(prcmu_base + reg);