[media] rc: remove ir-common module

Something weird happened with commit 740069e6e043403199dbe2b42256722fb814f6ae.
Instead of dong the right thing, it got somehow corrupted and reverted the
rc changes.

Thanks to David Härdeman for pointing me about the problem.

This patch should be merged with 740069e6e04 before sending upstream.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

2 files changed, 100 insertions, 7 deletions

diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 659e44873440..3c7c0a572c45 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -4,7 +4,7 @@ config VIDEO_BT848
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
-	depends on IR_LEGACY
+	depends on IR_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 4b4f6137c6c5..e8f60ab58db6 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -140,7 +140,100 @@ static void bttv_input_timer(unsigned long data)
 	mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
 }
 
-/* ---------------------------------------------------------------*/
+/*
+ * FIXME: Nebula digi uses the legacy way to decode RC5, instead of relying
+ * on the rc-core way. As we need to be sure that both IRQ transitions are
+ * properly triggered, Better to touch it only with this hardware for
+ * testing.
+ */
+
+/* decode raw bit pattern to RC5 code */
+static u32 bttv_rc5_decode(unsigned int code)
+{
+	unsigned int org_code = code;
+	unsigned int pair;
+	unsigned int rc5 = 0;
+	int i;
+
+	for (i = 0; i < 14; ++i) {
+		pair = code & 0x3;
+		code >>= 2;
+
+		rc5 <<= 1;
+		switch (pair) {
+		case 0:
+		case 2:
+			break;
+		case 1:
+			rc5 |= 1;
+		break;
+		case 3:
+			dprintk(KERN_INFO DEVNAME ":rc5_decode(%x) bad code\n",
+				org_code);
+			return 0;
+		}
+	}
+	dprintk(KERN_INFO DEVNAME ":"
+		"code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+		"instr=%x\n", rc5, org_code, RC5_START(rc5),
+		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+	return rc5;
+}
+
+void bttv_rc5_timer_end(unsigned long data)
+{
+	struct card_ir *ir = (struct card_ir *)data;
+	struct timeval tv;
+	unsigned long current_jiffies;
+	u32 gap;
+	u32 rc5 = 0;
+
+	/* get time */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* signal we're ready to start a new code */
+	ir->active = 0;
+
+	/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
+	if (gap < 28000) {
+		dprintk(KERN_INFO DEVNAME ": spurious timer_end\n");
+		return;
+	}
+
+	if (ir->last_bit < 20) {
+		/* ignore spurious codes (caused by light/other remotes) */
+		dprintk(KERN_INFO DEVNAME ": short code: %x\n", ir->code);
+	} else {
+		ir->code = (ir->code << ir->shift_by) | 1;
+		rc5 = bttv_rc5_decode(ir->code);
+
+		/* two start bits? */
+		if (RC5_START(rc5) != ir->start) {
+			printk(KERN_INFO DEVNAME ":"
+			       " rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+			/* right address? */
+		} else if (RC5_ADDR(rc5) == ir->addr) {
+			u32 toggle = RC5_TOGGLE(rc5);
+			u32 instr = RC5_INSTR(rc5);
+
+			/* Good code */
+			ir_keydown(ir->dev, instr, toggle);
+			dprintk(KERN_INFO DEVNAME ":"
+				" instruction %x, toggle %x\n",
+				instr, toggle);
+		}
+	}
+}
 
 static int bttv_rc5_irq(struct bttv *btv)
 {
@@ -206,7 +299,7 @@ static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
 	} else if (ir->rc5_gpio) {
 		/* set timer_end for code completion */
 		init_timer(&ir->timer_end);
-		ir->timer_end.function = ir_rc5_timer_end;
+		ir->timer_end.function = bttv_rc5_timer_end;
 		ir->timer_end.data = (unsigned long)ir;
 		ir->shift_by = 1;
 		ir->start = 3;
@@ -283,10 +376,10 @@ void __devinit init_bttv_i2c_ir(struct bttv *btv)
 	default:
 		/*
 		 * The external IR receiver is at i2c address 0x34 (0x35 for
-                 * reads).  Future Hauppauge cards will have an internal
-                 * receiver at 0x30 (0x31 for reads).  In theory, both can be
-                 * fitted, and Hauppauge suggest an external overrides an
-                 * internal.
+		 * reads).  Future Hauppauge cards will have an internal
+		 * receiver at 0x30 (0x31 for reads).  In theory, both can be
+		 * fitted, and Hauppauge suggest an external overrides an
+		 * internal.
 		 * That's why we probe 0x1a (~0x34) first. CB
 		 */