diff options
| author | Devin Heitmueller <dheitmueller@kernellabs.com> | 2017-04-19 20:13:46 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2017-06-06 07:47:40 -0300 |
| commit | 427de05cf20f6b3bbcc79a6f3511fa13797fbdbe (patch) | |
| tree | 2e2cab5de16f726dad51a6c56b3e4d68473049f1 /drivers/media/dvb-frontends | |
| parent | bb750c7b4cecd6c9d12f41cb71e301141bad8835 (diff) | |
[media] au8522: rework setup of audio routing
The original code was based on my reverse engineering of an I2C trace
of the Windows driver. Now that I know what the registers actually do,
restructure the code a bit, removing some unneeded register programming
and fixing the sequencing of operations.
This reduces the time it takes to change inputs from 1300ms down to
600ms (as measured by "time v4l2-ctl -i 0")
Note this does not address outstanding issues related to the management
of the module clocks and power control for the various blocks, which
will be done in a separate patch.
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'drivers/media/dvb-frontends')
| -rw-r--r-- | drivers/media/dvb-frontends/au8522_decoder.c | 29 |
1 files changed, 15 insertions, 14 deletions
diff --git a/drivers/media/dvb-frontends/au8522_decoder.c b/drivers/media/dvb-frontends/au8522_decoder.c index 78117178f532..281b5ac31e34 100644 --- a/drivers/media/dvb-frontends/au8522_decoder.c +++ b/drivers/media/dvb-frontends/au8522_decoder.c @@ -418,28 +418,29 @@ static void set_audio_input(struct au8522_state *state) lpfilter_coef[i].reg_val[0]); } - /* Setup audio */ - au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00); - au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00); - au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00); - msleep(150); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x00); - msleep(10); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); - msleep(50); + /* Set the volume */ au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff); - msleep(80); - au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); - au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); + + /* Not sure what this does */ au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO); + + /* Setup the audio mode to stereo DBX */ au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82); msleep(70); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09); + + /* Start the audio processing module */ + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d); + + /* Set the audio frequency to 48 KHz */ au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03); + + /* Set the I2S parameters (WS, LSB, mode, sample rate */ au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2); + + /* Enable the I2S output */ + au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09); } /* ----------------------------------------------------------------------- */ |