pcmcia: use autoconfiguration feature for ioports and iomem

When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding
fields in struct pcmcia_device *p_dev->resource[0,1,2] are set
accordinly. Drivers wishing to override certain settings may do so in
the callback function, but they no longer need to parse the CIS entries
stored in cistpl_cftable_entry_t themselves.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

1 files changed, 6 insertions, 30 deletions

diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index b69eccfdbb05..a88c88f6cdeb 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -128,8 +128,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
     /* from old sedl_cs 
     */
     /* The io structure describes IO port mapping */
-    link->resource[0]->end = 8;
-    link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
     return sedlbauer_config(link);
 } /* sedlbauer_attach */
@@ -161,35 +159,13 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link)
     device available to the system.
     
 ======================================================================*/
-static int sedlbauer_config_check(struct pcmcia_device *p_dev,
-				  cistpl_cftable_entry_t *cfg,
-				  cistpl_cftable_entry_t *dflt,
-				  void *priv_data)
+static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
-	if (cfg->index == 0)
-		return -ENODEV;
-
-	/* IO window settings */
-	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		p_dev->resource[0]->start = io->win[0].base;
-		p_dev->resource[0]->end = io->win[0].len;
-		p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-		p_dev->resource[0]->flags |=
-					pcmcia_io_cfg_data_width(io->flags);
-		if (io->nwin > 1) {
-			p_dev->resource[1]->flags = p_dev->resource[0]->flags;
-			p_dev->resource[1]->start = io->win[1].base;
-			p_dev->resource[1]->end = io->win[1].len;
-		}
-		/* This reserves IO space but doesn't actually enable it */
-		p_dev->io_lines = 3;
-		if (pcmcia_request_io(p_dev) != 0)
-			return -ENODEV;
-	}
+	if (p_dev->config_index == 0)
+		return -EINVAL;
 
-	return 0;
+	p_dev->io_lines = 3;
+	return pcmcia_request_io(p_dev);
 }
 
 
@@ -202,7 +178,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
     dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
 
     link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
-	    CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO;
+	    CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
 
     /*
       In this loop, we scan the CIS for configuration table entries,