isdn: remove hisax driver

With the decline of ISDN, this seems to have become almost completely
obsolete, and even in the past years before that, almost all remaining
users appear to have used mISDN instead.

Birger Harzenetter noted that he is still using i4l/hisax to take
advantage of the 'divert' driver for call diversion, but otherwise uses
mISDN on the same hardware. This is a rare edge case as far as I
can tell, but we are still breaking an actively used work flow
(see https://xkcd.com/1172/).

We debated moving i4l/hisax to staging as an intermediate step, but as
he is not likely to change the setup, and that would just delay breaking
this use case.  The alternatives here are to stay on stable kernels
< 5.2, to create an external driver repository for isdn4linux, or to
add divert functionality to mISDN.

Cc: Birger Harzenetter <WIMPy@yeti.dk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 380 deletions

diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
deleted file mode 100644
index dfbcd2eaa81a..000000000000
--- a/drivers/isdn/hisax/niccy.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/* $Id: niccy.c,v 1.21.2.4 2004/01/13 23:48:39 keil Exp $
- *
- * low level stuff for Dr. Neuhaus NICCY PnP and NICCY PCI and
- * compatible (SAGEM cybermodem)
- *
- * Author       Karsten Keil
- * Copyright    by Karsten Keil      <keil@isdn4linux.de>
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * Thanks to Dr. Neuhaus and SAGEM for information
- *
- */
-
-#include <linux/init.h>
-#include "hisax.h"
-#include "isac.h"
-#include "hscx.h"
-#include "isdnl1.h"
-#include <linux/pci.h>
-#include <linux/isapnp.h>
-
-static const char *niccy_revision = "$Revision: 1.21.2.4 $";
-
-#define byteout(addr, val) outb(val, addr)
-#define bytein(addr) inb(addr)
-
-#define ISAC_PCI_DATA	0
-#define HSCX_PCI_DATA	1
-#define ISAC_PCI_ADDR	2
-#define HSCX_PCI_ADDR	3
-#define ISAC_PNP	0
-#define HSCX_PNP	1
-
-/* SUB Types */
-#define NICCY_PNP	1
-#define NICCY_PCI	2
-
-/* PCI stuff */
-#define PCI_IRQ_CTRL_REG	0x38
-#define PCI_IRQ_ENABLE		0x1f00
-#define PCI_IRQ_DISABLE		0xff0000
-#define PCI_IRQ_ASSERT		0x800000
-
-static inline u_char readreg(unsigned int ale, unsigned int adr, u_char off)
-{
-	register u_char ret;
-
-	byteout(ale, off);
-	ret = bytein(adr);
-	return ret;
-}
-
-static inline void readfifo(unsigned int ale, unsigned int adr, u_char off,
-			    u_char *data, int size)
-{
-	byteout(ale, off);
-	insb(adr, data, size);
-}
-
-static inline void writereg(unsigned int ale, unsigned int adr, u_char off,
-			    u_char data)
-{
-	byteout(ale, off);
-	byteout(adr, data);
-}
-
-static inline void writefifo(unsigned int ale, unsigned int adr, u_char off,
-			     u_char *data, int size)
-{
-	byteout(ale, off);
-	outsb(adr, data, size);
-}
-
-/* Interface functions */
-
-static u_char ReadISAC(struct IsdnCardState *cs, u_char offset)
-{
-	return readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, offset);
-}
-
-static void WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
-{
-	writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, offset, value);
-}
-
-static void ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
-{
-	readfifo(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, 0, data, size);
-}
-
-static void WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
-{
-	writefifo(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, 0, data, size);
-}
-
-static u_char ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
-{
-	return readreg(cs->hw.niccy.hscx_ale,
-		       cs->hw.niccy.hscx, offset + (hscx ? 0x40 : 0));
-}
-
-static void WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset,
-		      u_char value)
-{
-	writereg(cs->hw.niccy.hscx_ale,
-		 cs->hw.niccy.hscx, offset + (hscx ? 0x40 : 0), value);
-}
-
-#define READHSCX(cs, nr, reg) readreg(cs->hw.niccy.hscx_ale,		\
-				      cs->hw.niccy.hscx, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.niccy.hscx_ale,	\
-					      cs->hw.niccy.hscx, reg + (nr ? 0x40 : 0), data)
-
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.niccy.hscx_ale,	\
-						cs->hw.niccy.hscx, (nr ? 0x40 : 0), ptr, cnt)
-
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.niccy.hscx_ale, \
-						  cs->hw.niccy.hscx, (nr ? 0x40 : 0), ptr, cnt)
-
-#include "hscx_irq.c"
-
-static irqreturn_t niccy_interrupt(int intno, void *dev_id)
-{
-	struct IsdnCardState *cs = dev_id;
-	u_char val;
-	u_long flags;
-
-	spin_lock_irqsave(&cs->lock, flags);
-	if (cs->subtyp == NICCY_PCI) {
-		int ival;
-		ival = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
-		if (!(ival & PCI_IRQ_ASSERT)) {	/* IRQ not for us (shared) */
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return IRQ_NONE;
-		}
-		outl(ival, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
-	}
-	val = readreg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx,
-		      HSCX_ISTA + 0x40);
-Start_HSCX:
-	if (val)
-		hscx_int_main(cs, val);
-	val = readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_ISTA);
-Start_ISAC:
-	if (val)
-		isac_interrupt(cs, val);
-	val = readreg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx,
-		      HSCX_ISTA + 0x40);
-	if (val) {
-		if (cs->debug & L1_DEB_HSCX)
-			debugl1(cs, "HSCX IntStat after IntRoutine");
-		goto Start_HSCX;
-	}
-	val = readreg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_ISTA);
-	if (val) {
-		if (cs->debug & L1_DEB_ISAC)
-			debugl1(cs, "ISAC IntStat after IntRoutine");
-		goto Start_ISAC;
-	}
-	writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK, 0xFF);
-	writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK + 0x40,
-		 0xFF);
-	writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_MASK, 0xFF);
-	writereg(cs->hw.niccy.isac_ale, cs->hw.niccy.isac, ISAC_MASK, 0);
-	writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK, 0);
-	writereg(cs->hw.niccy.hscx_ale, cs->hw.niccy.hscx, HSCX_MASK + 0x40, 0);
-	spin_unlock_irqrestore(&cs->lock, flags);
-	return IRQ_HANDLED;
-}
-
-static void release_io_niccy(struct IsdnCardState *cs)
-{
-	if (cs->subtyp == NICCY_PCI) {
-		int val;
-
-		val = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
-		val &= PCI_IRQ_DISABLE;
-		outl(val, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
-		release_region(cs->hw.niccy.cfg_reg, 0x40);
-		release_region(cs->hw.niccy.isac, 4);
-	} else {
-		release_region(cs->hw.niccy.isac, 2);
-		release_region(cs->hw.niccy.isac_ale, 2);
-	}
-}
-
-static void niccy_reset(struct IsdnCardState *cs)
-{
-	if (cs->subtyp == NICCY_PCI) {
-		int val;
-
-		val = inl(cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
-		val |= PCI_IRQ_ENABLE;
-		outl(val, cs->hw.niccy.cfg_reg + PCI_IRQ_CTRL_REG);
-	}
-	inithscxisac(cs, 3);
-}
-
-static int niccy_card_msg(struct IsdnCardState *cs, int mt, void *arg)
-{
-	u_long flags;
-
-	switch (mt) {
-	case CARD_RESET:
-		spin_lock_irqsave(&cs->lock, flags);
-		niccy_reset(cs);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return 0;
-	case CARD_RELEASE:
-		release_io_niccy(cs);
-		return 0;
-	case CARD_INIT:
-		spin_lock_irqsave(&cs->lock, flags);
-		niccy_reset(cs);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return 0;
-	case CARD_TEST:
-		return 0;
-	}
-	return 0;
-}
-
-#ifdef __ISAPNP__
-static struct pnp_card *pnp_c = NULL;
-#endif
-
-int setup_niccy(struct IsdnCard *card)
-{
-	struct IsdnCardState *cs = card->cs;
-	char tmp[64];
-
-	strcpy(tmp, niccy_revision);
-	printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
-	if (cs->typ != ISDN_CTYPE_NICCY)
-		return 0;
-#ifdef __ISAPNP__
-	if (!card->para[1] && isapnp_present()) {
-		struct pnp_dev *pnp_d = NULL;
-		int err;
-
-		pnp_c = pnp_find_card(ISAPNP_VENDOR('S', 'D', 'A'),
-				      ISAPNP_FUNCTION(0x0150), pnp_c);
-		if (pnp_c) {
-			pnp_d = pnp_find_dev(pnp_c,
-					     ISAPNP_VENDOR('S', 'D', 'A'),
-					     ISAPNP_FUNCTION(0x0150), pnp_d);
-			if (!pnp_d) {
-				printk(KERN_ERR "NiccyPnP: PnP error card "
-				       "found, no device\n");
-				return 0;
-			}
-			pnp_disable_dev(pnp_d);
-			err = pnp_activate_dev(pnp_d);
-			if (err < 0) {
-				printk(KERN_WARNING "%s: pnp_activate_dev "
-				       "ret(%d)\n", __func__, err);
-				return 0;
-			}
-			card->para[1] = pnp_port_start(pnp_d, 0);
-			card->para[2] = pnp_port_start(pnp_d, 1);
-			card->para[0] = pnp_irq(pnp_d, 0);
-			if (card->para[0] == -1 || !card->para[1] ||
-			    !card->para[2]) {
-				printk(KERN_ERR "NiccyPnP:some resources are "
-				       "missing %ld/%lx/%lx\n",
-				       card->para[0], card->para[1],
-				       card->para[2]);
-				pnp_disable_dev(pnp_d);
-				return 0;
-			}
-		} else
-			printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
-	}
-#endif
-	if (card->para[1]) {
-		cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
-		cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
-		cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
-		cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
-		cs->hw.niccy.cfg_reg = 0;
-		cs->subtyp = NICCY_PNP;
-		cs->irq = card->para[0];
-		if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
-			printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
-			       "already in use\n",
-			       cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
-			return 0;
-		}
-		if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
-			printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
-			       "already in use\n",
-			       cs->hw.niccy.isac_ale,
-			       cs->hw.niccy.isac_ale + 1);
-			release_region(cs->hw.niccy.isac, 2);
-			return 0;
-		}
-	} else {
-#ifdef CONFIG_PCI
-		static struct pci_dev *niccy_dev;
-
-		u_int pci_ioaddr;
-		cs->subtyp = 0;
-		if ((niccy_dev = hisax_find_pci_device(PCI_VENDOR_ID_SATSAGEM,
-						       PCI_DEVICE_ID_SATSAGEM_NICCY,
-						       niccy_dev))) {
-			if (pci_enable_device(niccy_dev))
-				return 0;
-			/* get IRQ */
-			if (!niccy_dev->irq) {
-				printk(KERN_WARNING
-				       "Niccy: No IRQ for PCI card found\n");
-				return 0;
-			}
-			cs->irq = niccy_dev->irq;
-			cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
-			if (!cs->hw.niccy.cfg_reg) {
-				printk(KERN_WARNING
-				       "Niccy: No IO-Adr for PCI cfg found\n");
-				return 0;
-			}
-			pci_ioaddr = pci_resource_start(niccy_dev, 1);
-			if (!pci_ioaddr) {
-				printk(KERN_WARNING
-				       "Niccy: No IO-Adr for PCI card found\n");
-				return 0;
-			}
-			cs->subtyp = NICCY_PCI;
-		} else {
-			printk(KERN_WARNING "Niccy: No PCI card found\n");
-			return 0;
-		}
-		cs->irq_flags |= IRQF_SHARED;
-		cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
-		cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
-		cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
-		cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
-		if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
-			printk(KERN_WARNING
-			       "HiSax: NICCY data port %x-%x already in use\n",
-			       cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
-			return 0;
-		}
-		if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
-			printk(KERN_WARNING
-			       "HiSax: NICCY pci port %x-%x already in use\n",
-			       cs->hw.niccy.cfg_reg,
-			       cs->hw.niccy.cfg_reg + 0x40);
-			release_region(cs->hw.niccy.isac, 4);
-			return 0;
-		}
-#else
-		printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
-		printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
-		return 0;
-#endif				/* CONFIG_PCI */
-	}
-	printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
-	       (cs->subtyp == 1) ? "PnP" : "PCI",
-	       cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
-	setup_isac(cs);
-	cs->readisac = &ReadISAC;
-	cs->writeisac = &WriteISAC;
-	cs->readisacfifo = &ReadISACfifo;
-	cs->writeisacfifo = &WriteISACfifo;
-	cs->BC_Read_Reg = &ReadHSCX;
-	cs->BC_Write_Reg = &WriteHSCX;
-	cs->BC_Send_Data = &hscx_fill_fifo;
-	cs->cardmsg = &niccy_card_msg;
-	cs->irq_func = &niccy_interrupt;
-	ISACVersion(cs, "Niccy:");
-	if (HscxVersion(cs, "Niccy:")) {
-		printk(KERN_WARNING "Niccy: wrong HSCX versions check IO "
-		       "address\n");
-		release_io_niccy(cs);
-		return 0;
-	}
-	return 1;
-}