Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

 - add sanity checks to USB endpoints in various dirvers

 - max77650-onkey was missing an OF table which was preventing module
   autoloading

 - a revert and a different fix for F54 handling in Synaptics dirver

 - a fixup for handling register in pm8xxx vibrator driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: pm8xxx-vib - fix handling of separate enable register
  Input: keyspan-remote - fix control-message timeouts
  Input: max77650-onkey - add of_match table
  Input: rmi_f54 - read from FIFO in 32 byte blocks
  Revert "Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers"
  Input: sur40 - fix interface sanity checks
  Input: gtco - drop redundant variable reinit
  Input: gtco - fix extra-descriptor debug message
  Input: gtco - fix endpoint sanity check
  Input: aiptek - use descriptors of current altsetting
  Input: aiptek - fix endpoint sanity check
  Input: pegasus_notetaker - fix endpoint sanity check
  Input: sun4i-ts - add a check for devm_thermal_zone_of_sensor_register
  Input: evdev - convert kzalloc()/vzalloc() to kvzalloc()

11 files changed, 59 insertions, 40 deletions

diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index f918fca9ada3..cb6e3a5f509c 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -484,10 +484,7 @@ static int evdev_open(struct inode *inode, struct file *file)
 	struct evdev_client *client;
 	int error;
 
-	client = kzalloc(struct_size(client, buffer, bufsize),
-			 GFP_KERNEL | __GFP_NOWARN);
-	if (!client)
-		client = vzalloc(struct_size(client, buffer, bufsize));
+	client = kvzalloc(struct_size(client, buffer, bufsize), GFP_KERNEL);
 	if (!client)
 		return -ENOMEM;
 
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 83368f1e7c4e..4650f4a94989 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -336,7 +336,8 @@ static int keyspan_setup(struct usb_device* dev)
 	int retval = 0;
 
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
+				 0x11, 0x40, 0x5601, 0x0, NULL, 0,
+				 USB_CTRL_SET_TIMEOUT);
 	if (retval) {
 		dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
 			__func__, retval);
@@ -344,7 +345,8 @@ static int keyspan_setup(struct usb_device* dev)
 	}
 
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
+				 0x44, 0x40, 0x0, 0x0, NULL, 0,
+				 USB_CTRL_SET_TIMEOUT);
 	if (retval) {
 		dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
 			__func__, retval);
@@ -352,7 +354,8 @@ static int keyspan_setup(struct usb_device* dev)
 	}
 
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
-				 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
+				 0x22, 0x40, 0x0, 0x0, NULL, 0,
+				 USB_CTRL_SET_TIMEOUT);
 	if (retval) {
 		dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
 			__func__, retval);
diff --git a/drivers/input/misc/max77650-onkey.c b/drivers/input/misc/max77650-onkey.c
index 4d875f2ac13d..ee55f22dbca5 100644
--- a/drivers/input/misc/max77650-onkey.c
+++ b/drivers/input/misc/max77650-onkey.c
@@ -108,9 +108,16 @@ static int max77650_onkey_probe(struct platform_device *pdev)
 	return input_register_device(onkey->input);
 }
 
+static const struct of_device_id max77650_onkey_of_match[] = {
+	{ .compatible = "maxim,max77650-onkey" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max77650_onkey_of_match);
+
 static struct platform_driver max77650_onkey_driver = {
 	.driver = {
 		.name = "max77650-onkey",
+		.of_match_table = max77650_onkey_of_match,
 	},
 	.probe = max77650_onkey_probe,
 };
diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c
index ecd762f93732..53ad25eaf1a2 100644
--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -90,7 +90,7 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
 
 	if (regs->enable_mask)
 		rc = regmap_update_bits(vib->regmap, regs->enable_addr,
-					on ? regs->enable_mask : 0, val);
+					regs->enable_mask, on ? ~0 : 0);
 
 	return rc;
 }
diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c
index 0bc01cfc2b51..6b23e679606e 100644
--- a/drivers/input/rmi4/rmi_f54.c
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -24,6 +24,12 @@
 #define F54_NUM_TX_OFFSET       1
 #define F54_NUM_RX_OFFSET       0
 
+/*
+ * The smbus protocol can read only 32 bytes max at a time.
+ * But this should be fine for i2c/spi as well.
+ */
+#define F54_REPORT_DATA_SIZE	32
+
 /* F54 commands */
 #define F54_GET_REPORT          1
 #define F54_FORCE_CAL           2
@@ -526,6 +532,7 @@ static void rmi_f54_work(struct work_struct *work)
 	int report_size;
 	u8 command;
 	int error;
+	int i;
 
 	report_size = rmi_f54_get_report_size(f54);
 	if (report_size == 0) {
@@ -558,23 +565,27 @@ static void rmi_f54_work(struct work_struct *work)
 
 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Get report command completed, reading data\n");
 
-	fifo[0] = 0;
-	fifo[1] = 0;
-	error = rmi_write_block(fn->rmi_dev,
-				fn->fd.data_base_addr + F54_FIFO_OFFSET,
-				fifo, sizeof(fifo));
-	if (error) {
-		dev_err(&fn->dev, "Failed to set fifo start offset\n");
-		goto abort;
-	}
+	for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
+		int size = min(F54_REPORT_DATA_SIZE, report_size - i);
+
+		fifo[0] = i & 0xff;
+		fifo[1] = i >> 8;
+		error = rmi_write_block(fn->rmi_dev,
+					fn->fd.data_base_addr + F54_FIFO_OFFSET,
+					fifo, sizeof(fifo));
+		if (error) {
+			dev_err(&fn->dev, "Failed to set fifo start offset\n");
+			goto abort;
+		}
 
-	error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr +
-			       F54_REPORT_DATA_OFFSET, f54->report_data,
-			       report_size);
-	if (error) {
-		dev_err(&fn->dev, "%s: read [%d bytes] returned %d\n",
-			__func__, report_size, error);
-		goto abort;
+		error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr +
+				       F54_REPORT_DATA_OFFSET,
+				       f54->report_data + i, size);
+		if (error) {
+			dev_err(&fn->dev, "%s: read [%d bytes] returned %d\n",
+				__func__, size, error);
+			goto abort;
+		}
 	}
 
 abort:
diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c
index b313c579914f..2407ea43de59 100644
--- a/drivers/input/rmi4/rmi_smbus.c
+++ b/drivers/input/rmi4/rmi_smbus.c
@@ -163,6 +163,7 @@ static int rmi_smb_write_block(struct rmi_transport_dev *xport, u16 rmiaddr,
 		/* prepare to write next block of bytes */
 		cur_len -= SMB_MAX_COUNT;
 		databuff += SMB_MAX_COUNT;
+		rmiaddr += SMB_MAX_COUNT;
 	}
 exit:
 	mutex_unlock(&rmi_smb->page_mutex);
@@ -214,6 +215,7 @@ static int rmi_smb_read_block(struct rmi_transport_dev *xport, u16 rmiaddr,
 		/* prepare to read next block of bytes */
 		cur_len -= SMB_MAX_COUNT;
 		databuff += SMB_MAX_COUNT;
+		rmiaddr += SMB_MAX_COUNT;
 	}
 
 	retval = 0;
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 2ca586fb914f..e08b0ef078e8 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1713,7 +1713,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
 	aiptek->inputdev = inputdev;
 	aiptek->intf = intf;
-	aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+	aiptek->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 	aiptek->inDelay = 0;
 	aiptek->endDelay = 0;
 	aiptek->previousJitterable = 0;
@@ -1802,14 +1802,14 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
 
 	/* Verify that a device really has an endpoint */
-	if (intf->altsetting[0].desc.bNumEndpoints < 1) {
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
 		dev_err(&intf->dev,
 			"interface has %d endpoints, but must have minimum 1\n",
-			intf->altsetting[0].desc.bNumEndpoints);
+			intf->cur_altsetting->desc.bNumEndpoints);
 		err = -EINVAL;
 		goto fail3;
 	}
-	endpoint = &intf->altsetting[0].endpoint[0].desc;
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
 
 	/* Go set up our URB, which is called when the tablet receives
 	 * input.
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 35031228a6d0..96d65575f75a 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -875,18 +875,14 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	}
 
 	/* Sanity check that a device has an endpoint */
-	if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) {
+	if (usbinterface->cur_altsetting->desc.bNumEndpoints < 1) {
 		dev_err(&usbinterface->dev,
 			"Invalid number of endpoints\n");
 		error = -EINVAL;
 		goto err_free_urb;
 	}
 
-	/*
-	 * The endpoint is always altsetting 0, we know this since we know
-	 * this device only has one interrupt endpoint
-	 */
-	endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+	endpoint = &usbinterface->cur_altsetting->endpoint[0].desc;
 
 	/* Some debug */
 	dev_dbg(&usbinterface->dev, "gtco # interfaces: %d\n", usbinterface->num_altsetting);
@@ -896,7 +892,8 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	if (usb_endpoint_xfer_int(endpoint))
 		dev_dbg(&usbinterface->dev, "endpoint: we have interrupt endpoint\n");
 
-	dev_dbg(&usbinterface->dev, "endpoint extra len:%d\n", usbinterface->altsetting[0].extralen);
+	dev_dbg(&usbinterface->dev, "interface extra len:%d\n",
+		usbinterface->cur_altsetting->extralen);
 
 	/*
 	 * Find the HID descriptor so we can find out the size of the
@@ -973,8 +970,6 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	input_dev->dev.parent = &usbinterface->dev;
 
 	/* Setup the URB, it will be posted later on open of input device */
-	endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
-
 	usb_fill_int_urb(gtco->urbinfo,
 			 udev,
 			 usb_rcvintpipe(udev,
diff --git a/drivers/input/tablet/pegasus_notetaker.c b/drivers/input/tablet/pegasus_notetaker.c
index a1f3a0cb197e..38f087404f7a 100644
--- a/drivers/input/tablet/pegasus_notetaker.c
+++ b/drivers/input/tablet/pegasus_notetaker.c
@@ -275,7 +275,7 @@ static int pegasus_probe(struct usb_interface *intf,
 		return -ENODEV;
 
 	/* Sanity check that the device has an endpoint */
-	if (intf->altsetting[0].desc.bNumEndpoints < 1) {
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
 		dev_err(&intf->dev, "Invalid number of endpoints\n");
 		return -EINVAL;
 	}
diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
index 0af0fe8c40d7..742a7e96c1b5 100644
--- a/drivers/input/touchscreen/sun4i-ts.c
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -237,6 +237,7 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
 	struct device *hwmon;
+	struct thermal_zone_device *thermal;
 	int error;
 	u32 reg;
 	bool ts_attached;
@@ -355,7 +356,10 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	if (IS_ERR(hwmon))
 		return PTR_ERR(hwmon);
 
-	devm_thermal_zone_of_sensor_register(ts->dev, 0, ts, &sun4i_ts_tz_ops);
+	thermal = devm_thermal_zone_of_sensor_register(ts->dev, 0, ts,
+						       &sun4i_ts_tz_ops);
+	if (IS_ERR(thermal))
+		return PTR_ERR(thermal);
 
 	writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
 
diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c
index 1dd47dda71cd..34d31c7ec8ba 100644
--- a/drivers/input/touchscreen/sur40.c
+++ b/drivers/input/touchscreen/sur40.c
@@ -661,7 +661,7 @@ static int sur40_probe(struct usb_interface *interface,
 	int error;
 
 	/* Check if we really have the right interface. */
-	iface_desc = &interface->altsetting[0];
+	iface_desc = interface->cur_altsetting;
 	if (iface_desc->desc.bInterfaceClass != 0xFF)
 		return -ENODEV;