Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new IIO device support, features and cleanup for the 5.8 cycle

Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)

New device support
* ad7476
  - Add ad7091 support (ID only)
* ad9467
  - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
  - New driver to support ADIs generic AXI ADC IP core, used to provide
    high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
    paired with a device using a slow configuration interface (spi etc)
    Includes DT bindings and some fixes for fpga headers.
* bmg160
  - Add support for BMI088 (ID only)
* max1241
  - New driver for this ADC.
* st_sensors
  - Add support for LIS2HH12 accelerometer
* sx9310
  - New driver supporting sx9310 and sx9311 proximity sensors.

Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000

Features
* st_lsm6dsx
  - Add LIS3MDL as a possible sensor hub device.
* vcnl4000
  - Add new concept of near level (from DT) to provide to userspace which
    often needs to have some calibrated concept of 'near'.

Cleanups, minor fixes etc.
* core
  - Use snprintf for functions where strings are built and there is
    potential for overflow.
  - Correct docs to indicate mlock should not be used directly by drivers.
  - Fix up accidental dropping of a patch to use bitmap_zalloc.
  - Stop allowing enabling of buffers with no channels enabled.
  - Drop unused 'stufftoread' from iio_buffer.
  - Drop scan_el_attrs form iio_buffer as unused.
  - Reorder sanity checks in __iio_device_register to fail earlier.
  - Drop all the devm_ runregister / free functions from IIO as they
    were never used and encourage poor design.
* dma-buffer
  - Tidy up includes.
* dma-engine-buffer
  - Provide dev-managed allocator.
  - Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
  - Replace some unnecessary casts of error ptrs and whilst there.
    use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
  - Drop casts in calls to regmap_bulk_read as they make no sense.
  - Use devm_platform_ioremap_resource to reduce boilerplate.
  - Fix typos in Analog Devices.
* counters/104-quad
  - Add Syed Nayyar Waris as an additional maintainer.
* ad7476
  - Generate CONVST signal internally rather than requiring external
    trigger.  Add sysfs read back as can now do so.
  - use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
  - Switch to read_avail from explicit attribute. Mostly done to avoid
    confusing people with a - sign (without surounding spaces) that
    was correct but checkpatch didn't like.
* adis library
  - Add missing newlines at end of error messages.
* adis16400
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
  - Move some channel definitions into individual drivers to avoid
    having to deal with complex options.
* ak8974
  - Silence an error on deffered probe.
* bmp280
  - Harden against IRQ before registration.
  - Convert to read_avail instead of opencoding the equivalent.
  - Explicitly mark GPIO as optional.
  - Cleanup casts.
  - Remove line breaks from strings.
* htts221
  - Replace direct access to platform_data with dev_get_platdata().
  - Use device properties rather than device tree ones to allow ACPI
    probing.
  - Casting cleanups.
* intel_mrfld_adc
  - Don't use unaligned accessor for aligned data.
* isl29125
  - Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
  - Remove comp to bool.
* max1363
  - Stop using mlock from the iio_dev directly in favour of a local lock
    with clearly defined scope.
* max30100
  - Use generic device properties to allow ACPI probe.
* mpu6050
  - Convert to i2c_new_client_device.
  - Add debugfs register access.
* st_lsm6dsx
  - Provide means of configuring full scale on slave device if supported.
  - Drop include of st_sensors header to get one value. Its not otherwise
    used by this driver.
* st-sensors
  - Replace direct access to platform_data with dev_get_platdata().
  - Casting cleanups.
  - Avoid splitting strings.
* st_uvis25
  - Casting cleanups.
* tsl2563
  - Typo fix.
* tsl2772
  - scnprintf in a non obvious string building usecase. Note also 'fixes'
    a wrong calculation of remaining space that couldn't actually cause
    any trouble as there was lots of room.
* xilinx-xadc
  - Fix Lars-Peter spelling his own name wrong :) + additional typos.

* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
  iio: magnetometer: ak8974: Silence deferred-probe error
  Documentation: ABI: document IIO in_proximity_nearlevel file
  iio: vcnl4000: Export near level property for proximity sensor
  dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  dt-bindings: iio: Introduce common properties for iio sensors
  dt-bindings: iio: vcnl4000: convert bindings to YAML format
  iio: Fix misspellings of "Analog Devices"
  iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
  iio: adc: at91-adc: Use devm_platform_ioremap_resource
  iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
  iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
  iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
  iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
  iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
  iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
  iio: buffer: drop devm_iio_kfifo_free() API call
  iio: buffer: drop devm_iio_hw_consumer_free() API call
  ...

2 files changed, 25 insertions, 18 deletions

diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c
index 82d470561ad3..973cdb4f1e83 100644
--- a/drivers/iio/chemical/atlas-sensor.c
+++ b/drivers/iio/chemical/atlas-sensor.c
@@ -426,8 +426,7 @@ static irqreturn_t atlas_trigger_handler(int irq, void *private)
 	int ret;
 
 	ret = regmap_bulk_read(data->regmap, data->chip->data_reg,
-			      (u8 *) &data->buffer,
-			      sizeof(__be32) * channels);
+			      &data->buffer, sizeof(__be32) * channels);
 
 	if (!ret)
 		iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
@@ -463,7 +462,7 @@ static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
 	if (suspended)
 		msleep(data->chip->delay);
 
-	ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val));
+	ret = regmap_bulk_read(data->regmap, reg, val, sizeof(*val));
 
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
@@ -485,7 +484,7 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 		switch (chan->type) {
 		case IIO_TEMP:
 			ret = regmap_bulk_read(data->regmap, chan->address,
-					      (u8 *) &reg, sizeof(reg));
+					       &reg, sizeof(reg));
 			break;
 		case IIO_PH:
 		case IIO_CONCENTRATION:
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index ccde4c65ff93..13773e01699b 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -114,14 +114,16 @@ static int bme680_read_calib(struct bme680_data *data,
 	__le16 buf;
 
 	/* Temperature related coefficients */
-	ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_T1_LSB_REG\n");
 		return ret;
 	}
 	calib->par_t1 = le16_to_cpu(buf);
 
-	ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_T2_LSB_REG\n");
 		return ret;
@@ -136,14 +138,16 @@ static int bme680_read_calib(struct bme680_data *data,
 	calib->par_t3 = tmp;
 
 	/* Pressure related coefficients */
-	ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P1_LSB_REG\n");
 		return ret;
 	}
 	calib->par_p1 = le16_to_cpu(buf);
 
-	ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P2_LSB_REG\n");
 		return ret;
@@ -157,14 +161,16 @@ static int bme680_read_calib(struct bme680_data *data,
 	}
 	calib->par_p3 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P4_LSB_REG\n");
 		return ret;
 	}
 	calib->par_p4 = le16_to_cpu(buf);
 
-	ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P5_LSB_REG\n");
 		return ret;
@@ -185,14 +191,16 @@ static int bme680_read_calib(struct bme680_data *data,
 	}
 	calib->par_p7 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P8_LSB_REG\n");
 		return ret;
 	}
 	calib->par_p8 = le16_to_cpu(buf);
 
-	ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG, (u8 *) &buf, 2);
+	ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_P9_LSB_REG\n");
 		return ret;
@@ -276,8 +284,8 @@ static int bme680_read_calib(struct bme680_data *data,
 	}
 	calib->par_gh1 = tmp;
 
-	ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG, (u8 *) &buf,
-			       2);
+	ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG,
+			       &buf, sizeof(buf));
 	if (ret < 0) {
 		dev_err(dev, "failed to read BME680_GH2_LSB_REG\n");
 		return ret;
@@ -615,7 +623,7 @@ static int bme680_read_temp(struct bme680_data *data, int *val)
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
-			       (u8 *) &tmp, 3);
+			       &tmp, 3);
 	if (ret < 0) {
 		dev_err(dev, "failed to read temperature\n");
 		return ret;
@@ -656,7 +664,7 @@ static int bme680_read_press(struct bme680_data *data,
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB,
-			       (u8 *) &tmp, 3);
+			       &tmp, 3);
 	if (ret < 0) {
 		dev_err(dev, "failed to read pressure\n");
 		return ret;
@@ -689,7 +697,7 @@ static int bme680_read_humid(struct bme680_data *data,
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BM6880_REG_HUMIDITY_MSB,
-			       (u8 *) &tmp, 2);
+			       &tmp, sizeof(tmp));
 	if (ret < 0) {
 		dev_err(dev, "failed to read humidity\n");
 		return ret;
@@ -754,7 +762,7 @@ static int bme680_read_gas(struct bme680_data *data,
 	}
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB,
-			       (u8 *) &tmp, 2);
+			       &tmp, sizeof(tmp));
 	if (ret < 0) {
 		dev_err(dev, "failed to read gas resistance\n");
 		return ret;