ide: fix UDMA/MWDMA/SWDMA masks (v3)

* use 0x00 instead of 0x80 to disable ->{ultra,mwdma,swdma}_mask
* add udma_mask field to ide_pci_device_t and use it to initialize
  ->ultra_mask in aec62xx, cmd64x, pdc202xx_{new,old} and piix drivers
* fix UDMA masks to match with chipset specific *_ratemask()
  (alim15x3, hpt366, serverworks and siimage drivers need UDMA mask
   filtering method - done in the next patch)

v2:
* piix: fix cable detection for 82801AA_1 and 82372FB_1
  [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
* cmd64x: use hwif->cds->udma_mask
  [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]
* aec62xx: fix newly introduced bug - check DMA status not command register
  [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]

v3:
* piix: use hwif->cds->udma_mask
  [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 17 insertions, 2 deletions

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 73bdf64dbbfc..abe0b1bb55ff 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -261,11 +261,13 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
 
 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 {
+	struct pci_dev *dev = hwif->pci_dev;
+
 	hwif->autodma = 0;
 	hwif->tuneproc = &aec62xx_tune_drive;
 	hwif->speedproc = &aec62xx_tune_chipset;
 
-	if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
+	if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
 		hwif->serialized = hwif->channel;
 
 	if (hwif->mate)
@@ -277,7 +279,15 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 		return;
 	}
 
-	hwif->ultra_mask = 0x7f;
+	hwif->ultra_mask = hwif->cds->udma_mask;
+
+	/* atp865 and atp865r */
+	if (hwif->ultra_mask == 0x3f) {
+		/* check bit 0x10 of DMA status register */
+		if (inb(pci_resource_start(dev, 4) + 2) & 0x10)
+ 			hwif->ultra_mask = 0x7f; /* udma0-6 */
+	}
+
 	hwif->mwdma_mask = 0x07;
 
 	hwif->ide_dma_check	= &aec62xx_config_drive_xfer_rate;
@@ -344,6 +354,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.bootable	= OFF_BOARD,
+		.udma_mask	= 0x07, /* udma0-2 */
 	},{	/* 1 */
 		.name		= "AEC6260",
 		.init_setup	= init_setup_aec62xx,
@@ -353,6 +364,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= NOAUTODMA,
 		.bootable	= OFF_BOARD,
+		.udma_mask	= 0x1f, /* udma0-4 */
 	},{	/* 2 */
 		.name		= "AEC6260R",
 		.init_setup	= init_setup_aec62xx,
@@ -363,6 +375,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.bootable	= NEVER_BOARD,
+		.udma_mask	= 0x1f, /* udma0-4 */
 	},{	/* 3 */
 		.name		= "AEC6X80",
 		.init_setup	= init_setup_aec6x80,
@@ -372,6 +385,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= AUTODMA,
 		.bootable	= OFF_BOARD,
+		.udma_mask	= 0x3f, /* udma0-5 */
 	},{	/* 4 */
 		.name		= "AEC6X80R",
 		.init_setup	= init_setup_aec6x80,
@@ -382,6 +396,7 @@ static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
 		.autodma	= AUTODMA,
 		.enablebits	= {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
 		.bootable	= OFF_BOARD,
+		.udma_mask	= 0x3f, /* udma0-5 */
 	}
 };