summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
authorErik Rosen <erik.rosen@metormote.com>2021-02-18 12:52:49 +0100
committerGuenter Roeck <linux@roeck-us.net>2021-04-20 06:50:14 -0700
commit42bfe7dd0f9918fb796049e2d159dedc6865f480 (patch)
tree67d82ef24084307f9ca60dbcf0aa770b6296837f /drivers/hwmon
parentd3e33067a6e4594edc70d0687feedb249079547c (diff)
hwmon: (pmbus/stpddc60) Add ST STPDDC60 pmbus driver
Add hardware monitoring support for ST STPDDC60 Unversal Digital Multicell Controller. Signed-off-by: Erik Rosen <erik.rosen@metormote.com> Link: https://lore.kernel.org/r/20210218115249.28513-3-erik.rosen@metormote.com [groeck: Fixed whitespace error in Makefile] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/pmbus/Kconfig10
-rw-r--r--drivers/hwmon/pmbus/Makefile1
-rw-r--r--drivers/hwmon/pmbus/stpddc60.c248
3 files changed, 259 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index ee8c27b3b83d..28658b9f09ff 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -256,6 +256,16 @@ config SENSORS_Q54SJ108A2
This driver can also be built as a module. If so, the module will
be called q54sj108a2.
+config SENSORS_STPDDC60
+ tristate "ST STPDDC60"
+ help
+ If you say yes here you get hardware monitoring support for ST
+ STPDDC60 Universal Digital Multicell Controller, as well as for
+ Flex BMR481.
+
+ This driver can also be built as a module. If so, the module will
+ be called stpddc60.
+
config SENSORS_TPS40422
tristate "TI TPS40422"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 685a6bc2b15f..ed1266f6fb01 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
obj-$(CONFIG_SENSORS_Q54SJ108A2) += q54sj108a2.o
+obj-$(CONFIG_SENSORS_STPDDC60) += stpddc60.o
obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
diff --git a/drivers/hwmon/pmbus/stpddc60.c b/drivers/hwmon/pmbus/stpddc60.c
new file mode 100644
index 000000000000..3e6709542b63
--- /dev/null
+++ b/drivers/hwmon/pmbus/stpddc60.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for the STPDDC60 controller
+ *
+ * Copyright (c) 2021 Flextronics International Sweden AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define STPDDC60_MFR_READ_VOUT 0xd2
+#define STPDDC60_MFR_OV_LIMIT_OFFSET 0xe5
+#define STPDDC60_MFR_UV_LIMIT_OFFSET 0xe6
+
+static const struct i2c_device_id stpddc60_id[] = {
+ {"stpddc60", 0},
+ {"bmr481", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, stpddc60_id);
+
+static struct pmbus_driver_info stpddc60_info = {
+ .pages = 1,
+ .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_POUT,
+};
+
+/*
+ * Calculate the closest absolute offset between commanded vout value
+ * and limit value in steps of 50mv in the range 0 (50mv) to 7 (400mv).
+ * Return 0 if the upper limit is lower than vout or if the lower limit
+ * is higher than vout.
+ */
+static u8 stpddc60_get_offset(int vout, u16 limit, bool over)
+{
+ int offset;
+ long v, l;
+
+ v = 250 + (vout - 1) * 5; /* Convert VID to mv */
+ l = (limit * 1000L) >> 8; /* Convert LINEAR to mv */
+
+ if (over == (l < v))
+ return 0;
+
+ offset = DIV_ROUND_CLOSEST(abs(l - v), 50);
+
+ if (offset > 0)
+ offset--;
+
+ return clamp_val(offset, 0, 7);
+}
+
+/*
+ * Adjust the linear format word to use the given fixed exponent.
+ */
+static u16 stpddc60_adjust_linear(u16 word, s16 fixed)
+{
+ s16 e, m, d;
+
+ e = ((s16)word) >> 11;
+ m = ((s16)((word & 0x7ff) << 5)) >> 5;
+ d = e - fixed;
+
+ if (d >= 0)
+ m <<= d;
+ else
+ m >>= -d;
+
+ return clamp_val(m, 0, 0x3ff) | ((fixed << 11) & 0xf800);
+}
+
+/*
+ * The VOUT_COMMAND register uses the VID format but the vout alarm limit
+ * registers use the LINEAR format so we override VOUT_MODE here to force
+ * LINEAR format for all registers.
+ */
+static int stpddc60_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_VOUT_MODE:
+ ret = 0x18;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * The vout related registers return values in LINEAR11 format when LINEAR16
+ * is expected. Clear the top 5 bits to set the exponent part to zero to
+ * convert the value to LINEAR16 format.
+ */
+static int stpddc60_read_word_data(struct i2c_client *client, int page,
+ int phase, int reg)
+{
+ int ret;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_READ_VOUT:
+ ret = pmbus_read_word_data(client, page, phase,
+ STPDDC60_MFR_READ_VOUT);
+ if (ret < 0)
+ return ret;
+ ret &= 0x7ff;
+ break;
+ case PMBUS_VOUT_OV_FAULT_LIMIT:
+ case PMBUS_VOUT_UV_FAULT_LIMIT:
+ ret = pmbus_read_word_data(client, page, phase, reg);
+ if (ret < 0)
+ return ret;
+ ret &= 0x7ff;
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * The vout under- and over-voltage limits are set as an offset relative to
+ * the commanded vout voltage. The vin, iout, pout and temp limits must use
+ * the same fixed exponent the chip uses to encode the data when read.
+ */
+static int stpddc60_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ int ret;
+ u8 offset;
+
+ if (page > 0)
+ return -ENXIO;
+
+ switch (reg) {
+ case PMBUS_VOUT_OV_FAULT_LIMIT:
+ ret = pmbus_read_word_data(client, page, 0xff,
+ PMBUS_VOUT_COMMAND);
+ if (ret < 0)
+ return ret;
+ offset = stpddc60_get_offset(ret, word, true);
+ ret = pmbus_write_byte_data(client, page,
+ STPDDC60_MFR_OV_LIMIT_OFFSET,
+ offset);
+ break;
+ case PMBUS_VOUT_UV_FAULT_LIMIT:
+ ret = pmbus_read_word_data(client, page, 0xff,
+ PMBUS_VOUT_COMMAND);
+ if (ret < 0)
+ return ret;
+ offset = stpddc60_get_offset(ret, word, false);
+ ret = pmbus_write_byte_data(client, page,
+ STPDDC60_MFR_UV_LIMIT_OFFSET,
+ offset);
+ break;
+ case PMBUS_VIN_OV_FAULT_LIMIT:
+ case PMBUS_VIN_UV_FAULT_LIMIT:
+ case PMBUS_OT_FAULT_LIMIT:
+ case PMBUS_OT_WARN_LIMIT:
+ case PMBUS_IOUT_OC_FAULT_LIMIT:
+ case PMBUS_IOUT_OC_WARN_LIMIT:
+ case PMBUS_POUT_OP_FAULT_LIMIT:
+ ret = pmbus_read_word_data(client, page, 0xff, reg);
+ if (ret < 0)
+ return ret;
+ word = stpddc60_adjust_linear(word, ret >> 11);
+ ret = pmbus_write_word_data(client, page, reg, word);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+
+ return ret;
+}
+
+static int stpddc60_probe(struct i2c_client *client)
+{
+ int status;
+ u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+ const struct i2c_device_id *mid;
+ struct pmbus_driver_info *info = &stpddc60_info;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_READ_BYTE_DATA
+ | I2C_FUNC_SMBUS_BLOCK_DATA))
+ return -ENODEV;
+
+ status = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, device_id);
+ if (status < 0) {
+ dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+ return status;
+ }
+ for (mid = stpddc60_id; mid->name[0]; mid++) {
+ if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+ break;
+ }
+ if (!mid->name[0]) {
+ dev_err(&client->dev, "Unsupported device\n");
+ return -ENODEV;
+ }
+
+ info->read_byte_data = stpddc60_read_byte_data;
+ info->read_word_data = stpddc60_read_word_data;
+ info->write_word_data = stpddc60_write_word_data;
+
+ status = pmbus_do_probe(client, info);
+ if (status < 0)
+ return status;
+
+ pmbus_set_update(client, PMBUS_VOUT_OV_FAULT_LIMIT, true);
+ pmbus_set_update(client, PMBUS_VOUT_UV_FAULT_LIMIT, true);
+
+ return 0;
+}
+
+static struct i2c_driver stpddc60_driver = {
+ .driver = {
+ .name = "stpddc60",
+ },
+ .probe_new = stpddc60_probe,
+ .id_table = stpddc60_id,
+};
+
+module_i2c_driver(stpddc60_driver);
+
+MODULE_AUTHOR("Erik Rosen <erik.rosen@metormote.com>");
+MODULE_DESCRIPTION("PMBus driver for ST STPDDC60");
+MODULE_LICENSE("GPL");