diff options
| author | Rakesh Pandit <rakesh@tuxera.com> | 2017-06-05 14:43:11 +0300 |
|---|---|---|
| committer | Christoph Hellwig <hch@lst.de> | 2017-06-07 11:08:50 +0200 |
| commit | 82b057caefaff2a891f821a617d939f46e03e844 (patch) | |
| tree | 6aa7192a8f0b9ad71aa8f6385427b426b50bb69c /drivers/hwmon/stts751.c | |
| parent | 82654b6b8ef8b93ee87a97fc562f87f081fc2f91 (diff) | |
nvme-pci: fix multiple ctrl removal scheduling
Commit c5f6ce97c1210 tries to address multiple resets but fails as
work_busy doesn't involve any synchronization and can fail. This is
reproducible easily as can be seen by WARNING below which is triggered
with line:
WARN_ON(dev->ctrl.state == NVME_CTRL_RESETTING)
Allowing multiple resets can result in multiple controller removal as
well if different conditions inside nvme_reset_work fail and which
might deadlock on device_release_driver.
[ 480.327007] WARNING: CPU: 3 PID: 150 at drivers/nvme/host/pci.c:1900 nvme_reset_work+0x36c/0xec0
[ 480.327008] Modules linked in: rfcomm fuse nf_conntrack_netbios_ns nf_conntrack_broadcast...
[ 480.327044] btusb videobuf2_core ghash_clmulni_intel snd_hwdep cfg80211 acer_wmi hci_uart..
[ 480.327065] CPU: 3 PID: 150 Comm: kworker/u16:2 Not tainted 4.12.0-rc1+ #13
[ 480.327065] Hardware name: Acer Predator G9-591/Mustang_SLS, BIOS V1.10 03/03/2016
[ 480.327066] Workqueue: nvme nvme_reset_work
[ 480.327067] task: ffff880498ad8000 task.stack: ffffc90002218000
[ 480.327068] RIP: 0010:nvme_reset_work+0x36c/0xec0
[ 480.327069] RSP: 0018:ffffc9000221bdb8 EFLAGS: 00010246
[ 480.327070] RAX: 0000000000460000 RBX: ffff880498a98128 RCX: dead000000000200
[ 480.327070] RDX: 0000000000000001 RSI: ffff8804b1028020 RDI: ffff880498a98128
[ 480.327071] RBP: ffffc9000221be50 R08: 0000000000000000 R09: 0000000000000000
[ 480.327071] R10: ffffc90001963ce8 R11: 000000000000020d R12: ffff880498a98000
[ 480.327072] R13: ffff880498a53500 R14: ffff880498a98130 R15: ffff880498a98128
[ 480.327072] FS: 0000000000000000(0000) GS:ffff8804c1cc0000(0000) knlGS:0000000000000000
[ 480.327073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 480.327074] CR2: 00007ffcf3c37f78 CR3: 0000000001e09000 CR4: 00000000003406e0
[ 480.327074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 480.327075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 480.327075] Call Trace:
[ 480.327079] ? __switch_to+0x227/0x400
[ 480.327081] process_one_work+0x18c/0x3a0
[ 480.327082] worker_thread+0x4e/0x3b0
[ 480.327084] kthread+0x109/0x140
[ 480.327085] ? process_one_work+0x3a0/0x3a0
[ 480.327087] ? kthread_park+0x60/0x60
[ 480.327102] ret_from_fork+0x2c/0x40
[ 480.327103] Code: e8 5a dc ff ff 85 c0 41 89 c1 0f.....
This patch addresses the problem by using state of controller to
decide whether reset should be queued or not as state change is
synchronizated using controller spinlock. Also cancel_work_sync is
used to make sure remove cancels the reset_work and waits for it to
finish. This patch also changes return value from -ENODEV to more
appropriate -EBUSY if nvme_reset fails to change state.
Fixes: c5f6ce97c1210 ("nvme: don't schedule multiple resets")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Diffstat (limited to 'drivers/hwmon/stts751.c')
0 files changed, 0 insertions, 0 deletions