drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY

Currently the DSI PHY timings are hard-coded for a specific panel
for the 10nm PHY.

Replace this with the auto PHY timing calculator which can calculate
the PHY timings for any panel.

Changes in v4:
- None

Changes in v3:
- None

Changes in v2:
- None

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

3 files changed, 111 insertions, 28 deletions

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 8e9d5c255820..9a9fa0c75a13 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -265,6 +265,115 @@ int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
 	return 0;
 }
 
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
+	struct msm_dsi_phy_clk_request *clk_req)
+{
+	const unsigned long bit_rate = clk_req->bitclk_rate;
+	const unsigned long esc_rate = clk_req->escclk_rate;
+	s32 ui, ui_x8, lpx;
+	s32 tmax, tmin;
+	s32 pcnt0 = 50;
+	s32 pcnt1 = 50;
+	s32 pcnt2 = 10;
+	s32 pcnt3 = 30;
+	s32 pcnt4 = 10;
+	s32 pcnt5 = 2;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 hb_en, hb_en_ckln;
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	timing->hs_halfbyte_en = 0;
+	hb_en = 0;
+	timing->hs_halfbyte_en_ckln = 0;
+	hb_en_ckln = 0;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	ui_x8 = ui << 3;
+	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+	temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (95 * coeff) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, false);
+
+	temp = 300 * coeff - (timing->clk_prepare << 3) * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = (tmin > 255) ? 511 : 255;
+	timing->clk_zero = linear_inter(tmax, tmin, pcnt5, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 3 * ui, ui_x8);
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp + 3 * ui) / ui_x8;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = S_DIV_ROUND_UP(40 * coeff + 4 * ui, ui_x8);
+	tmin = max_t(s32, temp, 0);
+	temp = (85 * coeff + 6 * ui) / ui_x8;
+	tmax = max_t(s32, temp, 0);
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, false);
+
+	temp = 145 * coeff + 10 * ui - (timing->hs_prepare << 3) * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt4, 0, false);
+
+	tmin = DIV_ROUND_UP(60 * coeff + 4 * ui, ui_x8) - 1;
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = (temp / ui_x8) - 1;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, false);
+
+	temp = 50 * coeff + ((hb_en << 2) - 8) * ui;
+	timing->hs_rqst = S_DIV_ROUND_UP(temp, ui_x8);
+
+	tmin = DIV_ROUND_UP(100 * coeff, ui_x8) - 1;
+	tmax = 255;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 50 * coeff + ((hb_en_ckln << 2) - 8) * ui;
+	timing->hs_rqst_ckln = S_DIV_ROUND_UP(temp, ui_x8);
+
+	temp = 60 * coeff + 52 * ui - 43 * ui;
+	tmin = DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	timing->shared_timings.clk_post =
+		linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	temp = 8 * ui + (timing->clk_prepare << 3) * ui;
+	temp += (((timing->clk_zero + 3) << 3) + 11) * ui;
+	temp += hb_en_ckln ? (((timing->hs_rqst_ckln << 3) + 4) * ui) :
+		(((timing->hs_rqst_ckln << 3) + 8) * ui);
+	tmin = S_DIV_ROUND_UP(temp, ui_x8) - 1;
+	tmax = 63;
+	if (tmin > tmax) {
+		temp = linear_inter(tmax << 1, tmin, pcnt2, 0, false);
+		timing->shared_timings.clk_pre = temp >> 1;
+		timing->shared_timings.clk_pre_inc_by_2 = 1;
+	} else {
+		timing->shared_timings.clk_pre =
+			linear_inter(tmax, tmin, pcnt2, 0, false);
+			timing->shared_timings.clk_pre_inc_by_2 = 0;
+	}
+
+	timing->ta_go = 3;
+	timing->ta_sure = 0;
+	timing->ta_get = 4;
+
+	DBG("%d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+		timing->shared_timings.clk_pre, timing->shared_timings.clk_post,
+		timing->shared_timings.clk_pre_inc_by_2, timing->clk_zero,
+		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+		timing->hs_rqst, timing->hs_rqst_ckln, timing->hs_halfbyte_en,
+		timing->hs_halfbyte_en_ckln, timing->hs_prep_dly,
+		timing->hs_prep_dly_ckln);
+
+	return 0;
+}
+
 void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
 				u32 bit_mask)
 {
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index c56268cbdb3d..a24ab80994a3 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -101,6 +101,8 @@ int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
 			     struct msm_dsi_phy_clk_request *clk_req);
 int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
 				struct msm_dsi_phy_clk_request *clk_req);
+int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
+				struct msm_dsi_phy_clk_request *clk_req);
 void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
 				u32 bit_mask);
 int msm_dsi_phy_init_common(struct msm_dsi_phy *phy);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
index 0af951aaeea1..b3fffc8dbb2a 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
@@ -79,34 +79,6 @@ static void dsi_phy_hw_v3_0_lane_settings(struct msm_dsi_phy *phy)
 	dsi_phy_write(lane_base + REG_DSI_10nm_PHY_LN_TX_DCTRL(3), 0x04);
 }
 
-static int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
-				       struct msm_dsi_phy_clk_request *clk_req)
-{
-	/*
-	 * TODO: These params need to be computed, they're currently hardcoded
-	 * for a 1440x2560@60Hz panel with a byteclk of 100.618 Mhz, and a
-	 * default escape clock of 19.2 Mhz.
-	 */
-
-	timing->hs_halfbyte_en = 0;
-	timing->clk_zero = 0x1c;
-	timing->clk_prepare = 0x07;
-	timing->clk_trail = 0x07;
-	timing->hs_exit = 0x23;
-	timing->hs_zero = 0x21;
-	timing->hs_prepare = 0x07;
-	timing->hs_trail = 0x07;
-	timing->hs_rqst = 0x05;
-	timing->ta_sure = 0x00;
-	timing->ta_go = 0x03;
-	timing->ta_get = 0x04;
-
-	timing->shared_timings.clk_pre = 0x2d;
-	timing->shared_timings.clk_post = 0x0d;
-
-	return 0;
-}
-
 static int dsi_10nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
 			       struct msm_dsi_phy_clk_request *clk_req)
 {