diff options
| author | Maxime Ripard <maxime@cerno.tech> | 2020-09-03 10:01:45 +0200 |
|---|---|---|
| committer | Maxime Ripard <maxime@cerno.tech> | 2020-09-07 18:14:54 +0200 |
| commit | 8b3f90e98e17644ee4899da953816d124fb1ac9f (patch) | |
| tree | f1c3160f066234edc00dd73d544a7972b7ae8ed3 /drivers/gpu/drm/vc4/vc4_hdmi.c | |
| parent | 09c438139b8f5b832823db2e2a8a29f990647fc5 (diff) | |
drm/vc4: hdmi: Do the VID_CTL configuration at once
The VID_CTL setup is done in several places in the driver even though it's
not really required. Let's simplify it a bit to do the configuration in one
go.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/08e7ebb605a560fcc149b69b4af52753a7870b2f.1599120059.git-series.maxime@cerno.tech
Diffstat (limited to 'drivers/gpu/drm/vc4/vc4_hdmi.c')
| -rw-r--r-- | drivers/gpu/drm/vc4/vc4_hdmi.c | 14 |
1 files changed, 6 insertions, 8 deletions
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 128d33c8c2c3..8bf69cafdd7e 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -428,10 +428,6 @@ static void vc4_hdmi_set_timings(struct vc4_hdmi *vc4_hdmi, HDMI_WRITE(HDMI_VERTB0, vertb_even); HDMI_WRITE(HDMI_VERTB1, vertb); - - HDMI_WRITE(HDMI_VID_CTL, - (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) | - (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW)); } static void vc4_hdmi_recenter_fifo(struct vc4_hdmi *vc4_hdmi) @@ -520,8 +516,6 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder) if (vc4_hdmi->variant->phy_init) vc4_hdmi->variant->phy_init(vc4_hdmi, mode); - HDMI_WRITE(HDMI_VID_CTL, 0); - HDMI_WRITE(HDMI_SCHEDULER_CONTROL, HDMI_READ(HDMI_SCHEDULER_CONTROL) | VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT | @@ -555,15 +549,19 @@ static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder) static void vc4_hdmi_encoder_post_crtc_enable(struct drm_encoder *encoder) { + struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode; struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder); struct vc4_hdmi_encoder *vc4_encoder = to_vc4_hdmi_encoder(encoder); + bool hsync_pos = mode->flags & DRM_MODE_FLAG_PHSYNC; + bool vsync_pos = mode->flags & DRM_MODE_FLAG_PVSYNC; int ret; HDMI_WRITE(HDMI_VID_CTL, - HDMI_READ(HDMI_VID_CTL) | VC4_HD_VID_CTL_ENABLE | VC4_HD_VID_CTL_UNDERFLOW_ENABLE | - VC4_HD_VID_CTL_FRAME_COUNTER_RESET); + VC4_HD_VID_CTL_FRAME_COUNTER_RESET | + (vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) | + (hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW)); if (vc4_encoder->hdmi_monitor) { HDMI_WRITE(HDMI_SCHEDULER_CONTROL, |