diff options
| author | Neil Armstrong <narmstrong@baylibre.com> | 2019-06-12 10:51:47 +0200 |
|---|---|---|
| committer | Andrzej Hajda <a.hajda@samsung.com> | 2019-07-01 12:33:19 +0200 |
| commit | fdbdcc83ffd7d00265a531e71f1d166566c09d66 (patch) | |
| tree | 26399225c5740d4cbbd01a0a92d1425ebb2ef086 /drivers/gpu/drm/radeon/radeon_audio.c | |
| parent | 52c2197aae1b9809830d59bc8f5fa95f7372b0c7 (diff) | |
drm/bridge: dw-hdmi: Use automatic CTS generation mode when using non-AHB audio
When using an I2S source using a different clock source (usually the I2S
audio HW uses dedicated PLLs, different from the HDMI PHY PLL), fixed
CTS values will cause some frequent audio drop-out and glitches as
reported on Amlogic, Allwinner and Rockchip SoCs setups.
Setting the CTS in automatic mode will let the HDMI controller generate
automatically the CTS value to match the input audio clock.
The DesignWare DW-HDMI User Guide explains:
For Automatic CTS generation
Write "0" on the bit field "CTS_manual", Register 0x3205: AUD_CTS3
The DesignWare DW-HDMI Databook explains :
If "CTS_manual" bit equals 0b this registers contains "audCTS[19:0]"
generated by the Cycle time counter according to specified timing.
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612085147.26971-1-narmstrong@baylibre.com
Diffstat (limited to 'drivers/gpu/drm/radeon/radeon_audio.c')
0 files changed, 0 insertions, 0 deletions