summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_sprite.c
diff options
context:
space:
mode:
authorVille Syrjälä <ville.syrjala@linux.intel.com>2014-04-29 13:35:46 +0300
committerDaniel Vetter <daniel.vetter@ffwll.ch>2014-05-06 10:18:02 +0200
commit8d7849db3eab7f560deba145dfed3cd4df97c975 (patch)
tree8c953720cdf774cfff43d5b79c3994be444df8b7 /drivers/gpu/drm/i915/intel_sprite.c
parentd9ceb957fd97836c7fb0e403062e68ad2f737021 (diff)
drm/i915: Make sprite updates atomic
Add a mechanism by which we can evade the leading edge of vblank. This guarantees that no two sprite register writes will straddle on either side of the vblank start, and that means all the writes will be latched together in one atomic operation. We do the vblank evade by checking the scanline counter, and if it's too close to the start of vblank (too close has been hardcoded to 100usec for now), we will wait for the vblank start to pass. In order to eliminate random delayes from the rest of the system, we operate with interrupts disabled, except when waiting for the vblank obviously. Note that we now go digging through pipe_to_crtc_mapping[] in the vblank interrupt handler, which is a bit dangerous since we set up interrupts before the crtcs. However in this case since it's the vblank interrupt, we don't actually unmask it until some piece of code requests it. v2: preempt_check_resched() calls after local_irq_enable() (Jesse) Hook up the vblank irq stuff on BDW as well v3: Pass intel_crtc instead of drm_crtc (Daniel) Warn if crtc.mutex isn't locked (Daniel) Add an explicit compiler barrier and document the barriers (Daniel) Note the irq vs. modeset setup madness in the commit message (Daniel) v4: Use prepare_to_wait() & co. directly and eliminate vbl_received v5: Refactor intel_pipe_handle_vblank() vs. drm_handle_vblank() (Chris) Check for min/max scanline <= 0 (Chris) Don't call intel_pipe_update_end() if start failed totally (Chris) Check that the vblank counters match on both sides of the critical section (Chris) v6: Fix atomic update for interlaced modes v7: Reorder code for better readability (Chris) v8: Drop preempt_check_resched(). It's not available to modules anymore and isn't even needed unless we ourselves cause a wakeup needing reschedule while interrupts are off Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Sourab Gupta <sourabgupta@gmail.com> Reviewed-by: Akash Goel <akash.goels@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to 'drivers/gpu/drm/i915/intel_sprite.c')
-rw-r--r--drivers/gpu/drm/i915/intel_sprite.c131
1 files changed, 131 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 336ae6c602f2..a3ed840aadbe 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -37,6 +37,89 @@
#include <drm/i915_drm.h>
#include "i915_drv.h"
+static int usecs_to_scanlines(const struct drm_display_mode *mode, int usecs)
+{
+ /* paranoia */
+ if (!mode->crtc_htotal)
+ return 1;
+
+ return DIV_ROUND_UP(usecs * mode->crtc_clock, 1000 * mode->crtc_htotal);
+}
+
+static bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl_count)
+{
+ struct drm_device *dev = crtc->base.dev;
+ const struct drm_display_mode *mode = &crtc->config.adjusted_mode;
+ enum pipe pipe = crtc->pipe;
+ long timeout = msecs_to_jiffies_timeout(1);
+ int scanline, min, max, vblank_start;
+ DEFINE_WAIT(wait);
+
+ WARN_ON(!mutex_is_locked(&crtc->base.mutex));
+
+ vblank_start = mode->crtc_vblank_start;
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ vblank_start = DIV_ROUND_UP(vblank_start, 2);
+
+ /* FIXME needs to be calibrated sensibly */
+ min = vblank_start - usecs_to_scanlines(mode, 100);
+ max = vblank_start - 1;
+
+ if (min <= 0 || max <= 0)
+ return false;
+
+ if (WARN_ON(drm_vblank_get(dev, pipe)))
+ return false;
+
+ local_irq_disable();
+
+ for (;;) {
+ /*
+ * prepare_to_wait() has a memory barrier, which guarantees
+ * other CPUs can see the task state update by the time we
+ * read the scanline.
+ */
+ prepare_to_wait(&crtc->vbl_wait, &wait, TASK_UNINTERRUPTIBLE);
+
+ scanline = intel_get_crtc_scanline(crtc);
+ if (scanline < min || scanline > max)
+ break;
+
+ if (timeout <= 0) {
+ DRM_ERROR("Potential atomic update failure on pipe %c\n",
+ pipe_name(crtc->pipe));
+ break;
+ }
+
+ local_irq_enable();
+
+ timeout = schedule_timeout(timeout);
+
+ local_irq_disable();
+ }
+
+ finish_wait(&crtc->vbl_wait, &wait);
+
+ drm_vblank_put(dev, pipe);
+
+ *start_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
+
+ return true;
+}
+
+static void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count)
+{
+ struct drm_device *dev = crtc->base.dev;
+ enum pipe pipe = crtc->pipe;
+ u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
+
+ local_irq_enable();
+
+ if (start_vbl_count != end_vbl_count)
+ DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u)\n",
+ pipe_name(pipe), start_vbl_count, end_vbl_count);
+}
+
static void
vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
@@ -48,11 +131,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
unsigned long sprsurf_offset, linear_offset;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
+ u32 start_vbl_count;
+ bool atomic_update;
sprctl = I915_READ(SPCNTR(pipe, plane));
@@ -131,6 +217,8 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
fb->pitches[0]);
linear_offset -= sprsurf_offset;
+ atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
+
I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
@@ -144,6 +232,9 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) +
sprsurf_offset);
POSTING_READ(SPSURF(pipe, plane));
+
+ if (atomic_update)
+ intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
@@ -152,8 +243,13 @@ vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
+ u32 start_vbl_count;
+ bool atomic_update;
+
+ atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) &
~SP_ENABLE);
@@ -161,6 +257,9 @@ vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
I915_WRITE(SPSURF(pipe, plane), 0);
POSTING_READ(SPSURF(pipe, plane));
+ if (atomic_update)
+ intel_pipe_update_end(intel_crtc, start_vbl_count);
+
intel_update_sprite_watermarks(dplane, crtc, 0, 0, false, false);
}
@@ -226,10 +325,13 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
u32 sprctl, sprscale = 0;
unsigned long sprsurf_offset, linear_offset;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
+ u32 start_vbl_count;
+ bool atomic_update;
sprctl = I915_READ(SPRCTL(pipe));
@@ -299,6 +401,8 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
pixel_size, fb->pitches[0]);
linear_offset -= sprsurf_offset;
+ atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
+
I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
@@ -318,6 +422,9 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
I915_WRITE(SPRSURF(pipe),
i915_gem_obj_ggtt_offset(obj) + sprsurf_offset);
POSTING_READ(SPRSURF(pipe));
+
+ if (atomic_update)
+ intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
@@ -326,7 +433,12 @@ ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
+ u32 start_vbl_count;
+ bool atomic_update;
+
+ atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE);
/* Can't leave the scaler enabled... */
@@ -336,6 +448,9 @@ ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
I915_WRITE(SPRSURF(pipe), 0);
POSTING_READ(SPRSURF(pipe));
+ if (atomic_update)
+ intel_pipe_update_end(intel_crtc, start_vbl_count);
+
/*
* Avoid underruns when disabling the sprite.
* FIXME remove once watermark updates are done properly.
@@ -410,10 +525,13 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
unsigned long dvssurf_offset, linear_offset;
u32 dvscntr, dvsscale;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
+ u32 start_vbl_count;
+ bool atomic_update;
dvscntr = I915_READ(DVSCNTR(pipe));
@@ -478,6 +596,8 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
pixel_size, fb->pitches[0]);
linear_offset -= dvssurf_offset;
+ atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
+
I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
@@ -492,6 +612,9 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
I915_WRITE(DVSSURF(pipe),
i915_gem_obj_ggtt_offset(obj) + dvssurf_offset);
POSTING_READ(DVSSURF(pipe));
+
+ if (atomic_update)
+ intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
@@ -500,7 +623,12 @@ ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
+ u32 start_vbl_count;
+ bool atomic_update;
+
+ atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE);
/* Disable the scaler */
@@ -509,6 +637,9 @@ ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
I915_WRITE(DVSSURF(pipe), 0);
POSTING_READ(DVSSURF(pipe));
+ if (atomic_update)
+ intel_pipe_update_end(intel_crtc, start_vbl_count);
+
/*
* Avoid underruns when disabling the sprite.
* FIXME remove once watermark updates are done properly.