Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
  Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
  (Jani)
- DP ESI defines for link status (DK)

Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
  (Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
  Clausen)

New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)

Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!

* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
  drm: add backwards compatibility support for drm_kms_helper.edid_firmware
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm/dp: DPCD register defines for link status within ESI field
  drm/rockchip: Replace dev_* with DRM_DEV_*
  drm/tinydrm: Drop driver registered message
  drm/gem-fb-helper: Use debug message on gem lookup failure
  drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/bridge: adv7511: Constify HDMI CODEC platform data
  drm/bridge: adv7511: Enable connector polling when no interrupt is specified
  drm/bridge: adv7511: Remove private copy of the EDID
  drm/bridge: adv7511: Properly update EDID when no EDID was found
  drm/crtc: Convert setcrtc ioctl locking to interruptible.
  drm/atomic: Convert pageflip ioctl locking to interruptible.
  drm/legacy: Convert setplane ioctl locking to interruptible.
  drm/legacy: Convert cursor ioctl locking to interruptible.
  drm/atomic: Convert atomic ioctl locking to interruptible.
  drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
  drm/tve200: Clean up panel bridging
  drm/doc: Update todo.rst
  drm/dp/mst: Sideband message transaction to power up/down nodes
  ...

4 files changed, 73 insertions, 58 deletions

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index fe18a5d2d84b..12ef2d8ee110 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -328,8 +328,6 @@ struct adv7511 {
 	enum adv7511_sync_polarity hsync_polarity;
 	bool rgb;
 
-	struct edid *edid;
-
 	struct gpio_desc *gpio_pd;
 
 	struct regulator_bulk_data *supplies;
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
index 67469c26bae8..1b4783d45c53 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_audio.c
@@ -210,7 +210,7 @@ static const struct hdmi_codec_ops adv7511_codec_ops = {
 	.get_dai_id	= adv7511_hdmi_i2s_get_dai_id,
 };
 
-static struct hdmi_codec_pdata codec_data = {
+static const struct hdmi_codec_pdata codec_data = {
 	.ops = &adv7511_codec_ops,
 	.max_i2s_channels = 2,
 	.i2s = 1,
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index b2431aee7887..bd7dbae1119e 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -199,17 +199,14 @@ static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
 
 static void adv7511_set_config_csc(struct adv7511 *adv7511,
 				   struct drm_connector *connector,
-				   bool rgb)
+				   bool rgb, bool hdmi_mode)
 {
 	struct adv7511_video_config config;
 	bool output_format_422, output_format_ycbcr;
 	unsigned int mode;
 	uint8_t infoframe[17];
 
-	if (adv7511->edid)
-		config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
-	else
-		config.hdmi_mode = false;
+	config.hdmi_mode = hdmi_mode;
 
 	hdmi_avi_infoframe_init(&config.avi_infoframe);
 
@@ -589,15 +586,14 @@ static int adv7511_get_modes(struct adv7511 *adv7511,
 	if (!adv7511->powered)
 		__adv7511_power_off(adv7511);
 
-	kfree(adv7511->edid);
-	adv7511->edid = edid;
-	if (!edid)
-		return 0;
 
 	drm_mode_connector_update_edid_property(connector, edid);
 	count = drm_add_edid_modes(connector, edid);
 
-	adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
+	adv7511_set_config_csc(adv7511, connector, adv7511->rgb,
+			       drm_detect_hdmi_monitor(edid));
+
+	kfree(edid);
 
 	return count;
 }
@@ -833,7 +829,11 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
 		return -ENODEV;
 	}
 
-	adv->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	if (adv->i2c_main->irq)
+		adv->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		adv->connector.polled = DRM_CONNECTOR_POLL_CONNECT |
+				DRM_CONNECTOR_POLL_DISCONNECT;
 
 	ret = drm_connector_init(bridge->dev, &adv->connector,
 				 &adv7511_connector_funcs,
@@ -1158,8 +1158,6 @@ static int adv7511_remove(struct i2c_client *i2c)
 
 	i2c_unregister_device(adv7511->i2c_edid);
 
-	kfree(adv7511->edid);
-
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 63c7a01b7053..f4f633a0dffa 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -30,19 +30,20 @@
 #include <video/mipi_display.h>
 
 #define DSI_VERSION			0x00
+
 #define DSI_PWR_UP			0x04
 #define RESET				0
 #define POWERUP				BIT(0)
 
 #define DSI_CLKMGR_CFG			0x08
-#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
-#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
+#define TO_CLK_DIVISION(div)		(((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVISION(div)	((div) & 0xff)
 
 #define DSI_DPI_VCID			0x0c
-#define DPI_VID(vid)			(((vid) & 0x3) << 0)
+#define DPI_VCID(vcid)			((vcid) & 0x3)
 
 #define DSI_DPI_COLOR_CODING		0x10
-#define EN18_LOOSELY			BIT(8)
+#define LOOSELY18_EN			BIT(8)
 #define DPI_COLOR_CODING_16BIT_1	0x0
 #define DPI_COLOR_CODING_16BIT_2	0x1
 #define DPI_COLOR_CODING_16BIT_3	0x2
@@ -61,22 +62,25 @@
 #define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
 #define INVACT_LPCMD_TIME(p)		((p) & 0xff)
 
+#define DSI_DBI_VCID			0x1c
 #define DSI_DBI_CFG			0x20
+#define DSI_DBI_PARTITIONING_EN		0x24
 #define DSI_DBI_CMDSIZE			0x28
 
 #define DSI_PCKHDL_CFG			0x2c
-#define EN_CRC_RX			BIT(4)
-#define EN_ECC_RX			BIT(3)
-#define EN_BTA				BIT(2)
-#define EN_EOTP_RX			BIT(1)
-#define EN_EOTP_TX			BIT(0)
+#define CRC_RX_EN			BIT(4)
+#define ECC_RX_EN			BIT(3)
+#define BTA_EN				BIT(2)
+#define EOTP_RX_EN			BIT(1)
+#define EOTP_TX_EN			BIT(0)
+
+#define DSI_GEN_VCID			0x30
 
 #define DSI_MODE_CFG			0x34
 #define ENABLE_VIDEO_MODE		0
 #define ENABLE_CMD_MODE			BIT(0)
 
 #define DSI_VID_MODE_CFG		0x38
-#define FRAME_BTA_ACK			BIT(14)
 #define ENABLE_LOW_POWER		(0x3f << 8)
 #define ENABLE_LOW_POWER_MASK		(0x3f << 8)
 #define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
@@ -85,8 +89,13 @@
 #define VID_MODE_TYPE_MASK			0x3
 
 #define DSI_VID_PKT_SIZE		0x3c
-#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
-#define VID_PKT_MAX_SIZE		0x3fff
+#define VID_PKT_SIZE(p)			((p) & 0x3fff)
+
+#define DSI_VID_NUM_CHUNKS		0x40
+#define VID_NUM_CHUNKS(c)		((c) & 0x1fff)
+
+#define DSI_VID_NULL_SIZE		0x44
+#define VID_NULL_SIZE(b)		((b) & 0x1fff)
 
 #define DSI_VID_HSA_TIME		0x48
 #define DSI_VID_HBP_TIME		0x4c
@@ -95,6 +104,8 @@
 #define DSI_VID_VBP_LINES		0x58
 #define DSI_VID_VFP_LINES		0x5c
 #define DSI_VID_VACTIVE_LINES		0x60
+#define DSI_EDPI_CMD_SIZE		0x64
+
 #define DSI_CMD_MODE_CFG		0x68
 #define MAX_RD_PKT_SIZE_LP		BIT(24)
 #define DCS_LW_TX_LP			BIT(19)
@@ -108,8 +119,8 @@
 #define GEN_SW_2P_TX_LP			BIT(10)
 #define GEN_SW_1P_TX_LP			BIT(9)
 #define GEN_SW_0P_TX_LP			BIT(8)
-#define EN_ACK_RQST			BIT(1)
-#define EN_TEAR_FX			BIT(0)
+#define ACK_RQST_EN			BIT(1)
+#define TEAR_FX_EN			BIT(0)
 
 #define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
 					 DCS_LW_TX_LP | \
@@ -125,27 +136,31 @@
 					 GEN_SW_0P_TX_LP)
 
 #define DSI_GEN_HDR			0x6c
+/* TODO These 2 defines will be reworked thanks to mipi_dsi_create_packet() */
 #define GEN_HDATA(data)			(((data) & 0xffff) << 8)
-#define GEN_HDATA_MASK			(0xffff << 8)
 #define GEN_HTYPE(type)			(((type) & 0xff) << 0)
-#define GEN_HTYPE_MASK			0xff
 
 #define DSI_GEN_PLD_DATA		0x70
 
 #define DSI_CMD_PKT_STATUS		0x74
-#define GEN_CMD_EMPTY			BIT(0)
-#define GEN_CMD_FULL			BIT(1)
-#define GEN_PLD_W_EMPTY			BIT(2)
-#define GEN_PLD_W_FULL			BIT(3)
-#define GEN_PLD_R_EMPTY			BIT(4)
-#define GEN_PLD_R_FULL			BIT(5)
 #define GEN_RD_CMD_BUSY			BIT(6)
+#define GEN_PLD_R_FULL			BIT(5)
+#define GEN_PLD_R_EMPTY			BIT(4)
+#define GEN_PLD_W_FULL			BIT(3)
+#define GEN_PLD_W_EMPTY			BIT(2)
+#define GEN_CMD_FULL			BIT(1)
+#define GEN_CMD_EMPTY			BIT(0)
 
 #define DSI_TO_CNT_CFG			0x78
 #define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
 #define LPRX_TO_CNT(p)			((p) & 0xffff)
 
+#define DSI_HS_RD_TO_CNT		0x7c
+#define DSI_LP_RD_TO_CNT		0x80
+#define DSI_HS_WR_TO_CNT		0x84
+#define DSI_LP_WR_TO_CNT		0x88
 #define DSI_BTA_TO_CNT			0x8c
+
 #define DSI_LPCLK_CTRL			0x94
 #define AUTO_CLKLANE_CTRL		BIT(1)
 #define PHY_TXREQUESTCLKHS		BIT(0)
@@ -154,6 +169,7 @@
 #define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
 #define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
 
+/* TODO Next register is slightly different between 1.30 & 1.31 IP version */
 #define DSI_PHY_TMR_CFG			0x9c
 #define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
 #define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
@@ -170,12 +186,15 @@
 #define PHY_UNSHUTDOWNZ			BIT(0)
 
 #define DSI_PHY_IF_CFG			0xa4
-#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
 #define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
+#define N_LANES(n)			(((n) - 1) & 0x3)
+
+#define DSI_PHY_ULPS_CTRL		0xa8
+#define DSI_PHY_TX_TRIGGERS		0xac
 
 #define DSI_PHY_STATUS			0xb0
-#define LOCK				BIT(0)
-#define STOP_STATE_CLK_LANE		BIT(2)
+#define PHY_STOP_STATE_CLK_LANE		BIT(2)
+#define PHY_LOCK			BIT(0)
 
 #define DSI_PHY_TST_CTRL0		0xb4
 #define PHY_TESTCLK			BIT(1)
@@ -187,12 +206,13 @@
 #define PHY_TESTEN			BIT(16)
 #define PHY_UNTESTEN			0
 #define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
-#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
+#define PHY_TESTDIN(n)			((n) & 0xff)
 
 #define DSI_INT_ST0			0xbc
 #define DSI_INT_ST1			0xc0
 #define DSI_INT_MSK0			0xc4
 #define DSI_INT_MSK1			0xc8
+#define DSI_PHY_TMR_RD_CFG		0xf4
 
 #define PHY_STATUS_TIMEOUT_US		10000
 #define CMD_PKT_STATUS_TIMEOUT_US	20000
@@ -307,7 +327,7 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
 	u32 val = 0;
 
 	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
-		val |= EN_ACK_RQST;
+		val |= ACK_RQST_EN;
 	if (lpm)
 		val |= CMD_MODE_ALL_LP;
 
@@ -506,8 +526,8 @@ static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
 	 * timeout clock division should be computed with the
 	 * high speed transmission counter timeout and byte lane...
 	 */
-	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
-		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
+	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVISION(10) |
+		  TX_ESC_CLK_DIVISION(esc_clk_division));
 }
 
 static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
@@ -520,7 +540,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
 		color = DPI_COLOR_CODING_24BIT;
 		break;
 	case MIPI_DSI_FMT_RGB666:
-		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+		color = DPI_COLOR_CODING_18BIT_2 | LOOSELY18_EN;
 		break;
 	case MIPI_DSI_FMT_RGB666_PACKED:
 		color = DPI_COLOR_CODING_18BIT_1;
@@ -535,7 +555,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 		val |= HSYNC_ACTIVE_LOW;
 
-	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
+	dsi_write(dsi, DSI_DPI_VCID, DPI_VCID(dsi->channel));
 	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
 	dsi_write(dsi, DSI_DPI_CFG_POL, val);
 	/*
@@ -550,7 +570,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
 
 static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
 {
-	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+	dsi_write(dsi, DSI_PCKHDL_CFG, CRC_RX_EN | ECC_RX_EN | BTA_EN);
 }
 
 static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
@@ -571,7 +591,7 @@ static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
 	/*
 	 * TODO dw drv improvements
 	 * compute high speed transmission counter timeout according
-	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
+	 * to the timeout clock division (TO_CLK_DIVISION) and byte lane...
 	 */
 	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
 	/*
@@ -684,13 +704,13 @@ static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
 	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
 		  PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
 
-	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
-				 val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
+	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, val,
+				 val & PHY_LOCK, 1000, PHY_STATUS_TIMEOUT_US);
 	if (ret < 0)
 		DRM_DEBUG_DRIVER("failed to wait phy lock state\n");
 
 	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
-				 val, val & STOP_STATE_CLK_LANE, 1000,
+				 val, val & PHY_STOP_STATE_CLK_LANE, 1000,
 				 PHY_STATUS_TIMEOUT_US);
 	if (ret < 0)
 		DRM_DEBUG_DRIVER("failed to wait phy clk lane stop state\n");
@@ -865,15 +885,14 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
 	 * Note that the reset was not defined in the initial device tree, so
 	 * we have to be prepared for it not being found.
 	 */
-	apb_rst = devm_reset_control_get(dev, "apb");
+	apb_rst = devm_reset_control_get_optional_exclusive(dev, "apb");
 	if (IS_ERR(apb_rst)) {
 		ret = PTR_ERR(apb_rst);
-		if (ret == -ENOENT) {
-			apb_rst = NULL;
-		} else {
+
+		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "Unable to get reset control: %d\n", ret);
-			return ERR_PTR(ret);
-		}
+
+		return ERR_PTR(ret);
 	}
 
 	if (apb_rst) {