diff options
author | Thierry Reding <treding@nvidia.com> | 2019-11-08 16:33:52 +0100 |
---|---|---|
committer | Bartosz Golaszewski <bgolaszewski@baylibre.com> | 2019-11-12 16:31:06 +0100 |
commit | 22635ed8a20d47ae3a590171aee90ccecfb62241 (patch) | |
tree | d48953b16be07a3b3bb68af353fa4bf7ab86bc7b /drivers/gpio | |
parent | 13a62a56aa4cdab94e696bc0a3e4fb6dc4200b0f (diff) |
gpio: tegra186: Program interrupt route mapping
The controls for the GG port on Tegra194 resides in the power partition
of the C5 PCIe controller and its interrupt route mapping can therefore
not be programmed by early boot firmware along with that of the other
ports.
Detect this generically by looking at which controls have already been
locked down using the security registers and fill in default values for
controls that are unlocked.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/gpio-tegra186.c | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c index 1e9993143eb4..cb5efb83bad4 100644 --- a/drivers/gpio/gpio-tegra186.c +++ b/drivers/gpio/gpio-tegra186.c @@ -15,6 +15,14 @@ #include <dt-bindings/gpio/tegra186-gpio.h> #include <dt-bindings/gpio/tegra194-gpio.h> +/* security registers */ +#define TEGRA186_GPIO_CTL_SCR 0x0c +#define TEGRA186_GPIO_CTL_SCR_SEC_WEN BIT(28) +#define TEGRA186_GPIO_CTL_SCR_SEC_REN BIT(27) + +#define TEGRA186_GPIO_INT_ROUTE_MAPPING(p, x) (0x14 + (p) * 0x20 + (x) * 4) + +/* control registers */ #define TEGRA186_GPIO_ENABLE_CONFIG 0x00 #define TEGRA186_GPIO_ENABLE_CONFIG_ENABLE BIT(0) #define TEGRA186_GPIO_ENABLE_CONFIG_OUT BIT(1) @@ -64,6 +72,7 @@ struct tegra_gpio { const struct tegra_gpio_soc *soc; + void __iomem *secure; void __iomem *base; }; @@ -449,6 +458,37 @@ static const struct of_device_id tegra186_pmc_of_match[] = { { /* sentinel */ } }; +static void tegra186_gpio_init_route_mapping(struct tegra_gpio *gpio) +{ + unsigned int i, j; + u32 value; + + for (i = 0; i < gpio->soc->num_ports; i++) { + const struct tegra_gpio_port *port = &gpio->soc->ports[i]; + unsigned int offset, p = port->port; + void __iomem *base; + + base = gpio->secure + port->bank * 0x1000 + 0x800; + + value = readl(base + TEGRA186_GPIO_CTL_SCR); + + /* + * For controllers that haven't been locked down yet, make + * sure to program the default interrupt route mapping. + */ + if ((value & TEGRA186_GPIO_CTL_SCR_SEC_REN) == 0 && + (value & TEGRA186_GPIO_CTL_SCR_SEC_WEN) == 0) { + for (j = 0; j < 8; j++) { + offset = TEGRA186_GPIO_INT_ROUTE_MAPPING(p, j); + + value = readl(base + offset); + value = BIT(port->pins) - 1; + writel(value, base + offset); + } + } + } +} + static int tegra186_gpio_probe(struct platform_device *pdev) { unsigned int i, j, offset; @@ -464,6 +504,10 @@ static int tegra186_gpio_probe(struct platform_device *pdev) gpio->soc = of_device_get_match_data(&pdev->dev); + gpio->secure = devm_platform_ioremap_resource_byname(pdev, "security"); + if (IS_ERR(gpio->secure)) + return PTR_ERR(gpio->secure); + gpio->base = devm_platform_ioremap_resource_byname(pdev, "gpio"); if (IS_ERR(gpio->base)) return PTR_ERR(gpio->base); @@ -558,6 +602,8 @@ static int tegra186_gpio_probe(struct platform_device *pdev) return -EPROBE_DEFER; } + tegra186_gpio_init_route_mapping(gpio); + irq->map = devm_kcalloc(&pdev->dev, gpio->gpio.ngpio, sizeof(*irq->map), GFP_KERNEL); if (!irq->map) |