Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 532 insertions, 0 deletions

diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c
new file mode 100644
index 000000000000..58e21fe44262
--- /dev/null
+++ b/drivers/char/toshiba.c
@@ -0,0 +1,532 @@
+/* toshiba.c -- Linux driver for accessing the SMM on Toshiba laptops
+ *
+ * Copyright (c) 1996-2001  Jonathan A. Buzzard (jonathan@buzzard.org.uk)
+ *
+ * Valuable assistance and patches from:
+ *     Tom May <tom@you-bastards.com>
+ *     Rob Napier <rnapier@employees.org>
+ *
+ * Fn status port numbers for machine ID's courtesy of
+ *     0xfc02: Scott Eisert <scott.e@sky-eye.com>
+ *     0xfc04: Steve VanDevender <stevev@efn.org>
+ *     0xfc08: Garth Berry <garth@itsbruce.net>
+ *     0xfc0a: Egbert Eich <eich@xfree86.org>
+ *     0xfc10: Andrew Lofthouse <Andrew.Lofthouse@robins.af.mil>
+ *     0xfc11: Spencer Olson <solson@novell.com>
+ *     0xfc13: Claudius Frankewitz <kryp@gmx.de>
+ *     0xfc15: Tom May <tom@you-bastards.com>
+ *     0xfc17: Dave Konrad <konrad@xenia.it>
+ *     0xfc1a: George Betzos <betzos@engr.colostate.edu>
+ *     0xfc1b: Munemasa Wada <munemasa@jnovel.co.jp>
+ *     0xfc1d: Arthur Liu <armie@slap.mine.nu>
+ *     0xfc5a: Jacques L'helgoualc'h <lhh@free.fr>
+ *     0xfcd1: Mr. Dave Konrad <konrad@xenia.it>
+ *
+ * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
+ *
+ *   This code is covered by the GNU GPL and you are free to make any
+ *   changes you wish to it under the terms of the license. However the
+ *   code has the potential to render your computer and/or someone else's
+ *   unusable. Please proceed with care when modifying the code.
+ *
+ * Note: Unfortunately the laptop hardware can close the System Configuration
+ *       Interface on it's own accord. It is therefore necessary for *all*
+ *       programs using this driver to be aware that *any* SCI call can fail at
+ *       *any* time. It is up to any program to be aware of this eventuality
+ *       and take appropriate steps.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * The information used to write this driver has been obtained by reverse
+ * engineering the software supplied by Toshiba for their portable computers in
+ * strict accordance with the European Council Directive 92/250/EEC on the legal
+ * protection of computer programs, and it's implementation into English Law by
+ * the Copyright (Computer Programs) Regulations 1992 (S.I. 1992 No.3233).
+ *
+ */
+
+#define TOSH_VERSION "1.11 26/9/2001"
+#define TOSH_DEBUG 0
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/miscdevice.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+
+#include <linux/toshiba.h>
+
+#define TOSH_MINOR_DEV 181
+
+static int tosh_id = 0x0000;
+static int tosh_bios = 0x0000;
+static int tosh_date = 0x0000;
+static int tosh_sci = 0x0000;
+static int tosh_fan = 0;
+
+static int tosh_fn = 0;
+
+module_param(tosh_fn, int, 0);
+
+
+static int tosh_ioctl(struct inode *, struct file *, unsigned int,
+	unsigned long);
+
+
+static struct file_operations tosh_fops = {
+	.owner		= THIS_MODULE,
+	.ioctl		= tosh_ioctl,
+};
+
+static struct miscdevice tosh_device = {
+	TOSH_MINOR_DEV,
+	"toshiba",
+	&tosh_fops
+};
+
+/*
+ * Read the Fn key status
+ */
+#ifdef CONFIG_PROC_FS
+static int tosh_fn_status(void)
+{
+        unsigned char scan;
+	unsigned long flags;
+
+	if (tosh_fn!=0) {
+		scan = inb(tosh_fn);
+	} else {
+		local_irq_save(flags);
+		outb(0x8e, 0xe4);
+		scan = inb(0xe5);
+		local_irq_restore(flags);
+	}
+
+        return (int) scan;
+}
+#endif
+
+
+/*
+ * For the Portage 610CT and the Tecra 700CS/700CDT emulate the HCI fan function
+ */
+static int tosh_emulate_fan(SMMRegisters *regs)
+{
+	unsigned long eax,ecx,flags;
+	unsigned char al;
+
+	eax = regs->eax & 0xff00;
+	ecx = regs->ecx & 0xffff;
+
+	/* Portage 610CT */
+
+	if (tosh_id==0xfccb) {
+		if (eax==0xfe00) {
+			/* fan status */
+			local_irq_save(flags);
+			outb(0xbe, 0xe4);
+			al = inb(0xe5);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = (unsigned int) (al & 0x01);
+		}
+		if ((eax==0xff00) && (ecx==0x0000)) {
+			/* fan off */
+			local_irq_save(flags);
+			outb(0xbe, 0xe4);
+			al = inb(0xe5);
+			outb(0xbe, 0xe4);
+			outb (al | 0x01, 0xe5);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = 0x00;
+		}
+		if ((eax==0xff00) && (ecx==0x0001)) {
+			/* fan on */
+			local_irq_save(flags);
+			outb(0xbe, 0xe4);
+			al = inb(0xe5);
+			outb(0xbe, 0xe4);
+			outb(al & 0xfe, 0xe5);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = 0x01;
+		}
+	}
+
+	/* Tecra 700CS/CDT */
+
+	if (tosh_id==0xfccc) {
+		if (eax==0xfe00) {
+			/* fan status */
+			local_irq_save(flags);
+			outb(0xe0, 0xe4);
+			al = inb(0xe5);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = al & 0x01;
+		}
+		if ((eax==0xff00) && (ecx==0x0000)) {
+			/* fan off */
+			local_irq_save(flags);
+			outb(0xe0, 0xe4);
+			al = inb(0xe5);
+			outw(0xe0 | ((al & 0xfe) << 8), 0xe4);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = 0x00;
+		}
+		if ((eax==0xff00) && (ecx==0x0001)) {
+			/* fan on */
+			local_irq_save(flags);
+			outb(0xe0, 0xe4);
+			al = inb(0xe5);
+			outw(0xe0 | ((al | 0x01) << 8), 0xe4);
+			local_irq_restore(flags);
+			regs->eax = 0x00;
+			regs->ecx = 0x01;
+		}
+	}
+
+	return 0;
+}
+
+
+/*
+ * Put the laptop into System Management Mode
+ */
+int tosh_smm(SMMRegisters *regs)
+{
+	int eax;
+
+	asm ("# load the values into the registers\n\t" \
+		"pushl %%eax\n\t" \
+		"movl 0(%%eax),%%edx\n\t" \
+		"push %%edx\n\t" \
+		"movl 4(%%eax),%%ebx\n\t" \
+		"movl 8(%%eax),%%ecx\n\t" \
+		"movl 12(%%eax),%%edx\n\t" \
+		"movl 16(%%eax),%%esi\n\t" \
+		"movl 20(%%eax),%%edi\n\t" \
+		"popl %%eax\n\t" \
+		"# call the System Management mode\n\t" \
+		"inb $0xb2,%%al\n\t"
+		"# fill out the memory with the values in the registers\n\t" \
+		"xchgl %%eax,(%%esp)\n\t"
+		"movl %%ebx,4(%%eax)\n\t" \
+		"movl %%ecx,8(%%eax)\n\t" \
+		"movl %%edx,12(%%eax)\n\t" \
+		"movl %%esi,16(%%eax)\n\t" \
+		"movl %%edi,20(%%eax)\n\t" \
+		"popl %%edx\n\t" \
+		"movl %%edx,0(%%eax)\n\t" \
+		"# setup the return value to the carry flag\n\t" \
+		"lahf\n\t" \
+		"shrl $8,%%eax\n\t" \
+		"andl $1,%%eax\n" \
+		: "=a" (eax)
+		: "a" (regs)
+		: "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
+
+	return eax;
+}
+
+
+static int tosh_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
+	unsigned long arg)
+{
+	SMMRegisters regs;
+	SMMRegisters __user *argp = (SMMRegisters __user *)arg;
+	unsigned short ax,bx;
+	int err;
+
+	if (!argp)
+		return -EINVAL;
+
+	if (copy_from_user(&regs, argp, sizeof(SMMRegisters)))
+		return -EFAULT;
+
+	switch (cmd) {
+		case TOSH_SMM:
+			ax = regs.eax & 0xff00;
+			bx = regs.ebx & 0xffff;
+			/* block HCI calls to read/write memory & PCI devices */
+			if (((ax==0xff00) || (ax==0xfe00)) && (bx>0x0069))
+				return -EINVAL;
+
+			/* do we need to emulate the fan ? */
+			if (tosh_fan==1) {
+				if (((ax==0xf300) || (ax==0xf400)) && (bx==0x0004)) {
+					err = tosh_emulate_fan(&regs);
+					break;
+				}
+			}
+			err = tosh_smm(&regs);
+			break;
+		default:
+			return -EINVAL;
+	}
+
+        if (copy_to_user(argp, &regs, sizeof(SMMRegisters)))
+        	return -EFAULT;
+
+	return (err==0) ? 0:-EINVAL;
+}
+
+
+/*
+ * Print the information for /proc/toshiba
+ */
+#ifdef CONFIG_PROC_FS
+static int tosh_get_info(char *buffer, char **start, off_t fpos, int length)
+{
+	char *temp;
+	int key;
+
+	temp = buffer;
+	key = tosh_fn_status();
+
+	/* Arguments
+	     0) Linux driver version (this will change if format changes)
+	     1) Machine ID
+	     2) SCI version
+	     3) BIOS version (major, minor)
+	     4) BIOS date (in SCI date format)
+	     5) Fn Key status
+	*/
+
+	temp += sprintf(temp, "1.1 0x%04x %d.%d %d.%d 0x%04x 0x%02x\n",
+		tosh_id,
+		(tosh_sci & 0xff00)>>8,
+		tosh_sci & 0xff,
+		(tosh_bios & 0xff00)>>8,
+		tosh_bios & 0xff,
+		tosh_date,
+		key);
+
+	return temp-buffer;
+}
+#endif
+
+
+/*
+ * Determine which port to use for the Fn key status
+ */
+static void tosh_set_fn_port(void)
+{
+	switch (tosh_id) {
+		case 0xfc02: case 0xfc04: case 0xfc09: case 0xfc0a: case 0xfc10:
+		case 0xfc11: case 0xfc13: case 0xfc15: case 0xfc1a: case 0xfc1b:
+		case 0xfc5a:
+			tosh_fn = 0x62;
+			break;
+		case 0xfc08: case 0xfc17: case 0xfc1d: case 0xfcd1: case 0xfce0:
+		case 0xfce2:
+			tosh_fn = 0x68;
+			break;
+		default:
+			tosh_fn = 0x00;
+			break;
+	}
+
+	return;
+}
+
+
+/*
+ * Get the machine identification number of the current model
+ */
+static int tosh_get_machine_id(void)
+{
+	int id;
+	SMMRegisters regs;
+	unsigned short bx,cx;
+	unsigned long address;
+
+	id = (0x100*(int) isa_readb(0xffffe))+((int) isa_readb(0xffffa));
+	
+	/* do we have a SCTTable machine identication number on our hands */
+
+	if (id==0xfc2f) {
+
+		/* start by getting a pointer into the BIOS */
+
+		regs.eax = 0xc000;
+		regs.ebx = 0x0000;
+		regs.ecx = 0x0000;
+		tosh_smm(&regs);
+		bx = (unsigned short) (regs.ebx & 0xffff);
+
+		/* At this point in the Toshiba routines under MS Windows
+		   the bx register holds 0xe6f5. However my code is producing
+		   a different value! For the time being I will just fudge the
+		   value. This has been verified on a Satellite Pro 430CDT,
+		   Tecra 750CDT, Tecra 780DVD and Satellite 310CDT. */
+#if TOSH_DEBUG
+		printk("toshiba: debugging ID ebx=0x%04x\n", regs.ebx);
+#endif
+		bx = 0xe6f5;
+
+		/* now twiddle with our pointer a bit */
+
+		address = 0x000f0000+bx;
+		cx = isa_readw(address);
+		address = 0x000f0009+bx+cx;
+		cx = isa_readw(address);
+		address = 0x000f000a+cx;
+		cx = isa_readw(address);
+
+		/* now construct our machine identification number */
+
+		id = ((cx & 0xff)<<8)+((cx & 0xff00)>>8);
+	}
+
+	return id;
+}
+
+
+/*
+ * Probe for the presence of a Toshiba laptop
+ *
+ *   returns and non-zero if unable to detect the presence of a Toshiba
+ *   laptop, otherwise zero and determines the Machine ID, BIOS version and
+ *   date, and SCI version.
+ */
+static int tosh_probe(void)
+{
+	int i,major,minor,day,year,month,flag;
+	unsigned char signature[7] = { 0x54,0x4f,0x53,0x48,0x49,0x42,0x41 };
+	SMMRegisters regs;
+
+	/* extra sanity check for the string "TOSHIBA" in the BIOS because
+	   some machines that are not Toshiba's pass the next test */
+
+	for (i=0;i<7;i++) {
+		if (isa_readb(0xfe010+i)!=signature[i]) {
+			printk("toshiba: not a supported Toshiba laptop\n");
+			return -ENODEV;
+		}
+	}
+
+	/* call the Toshiba SCI support check routine */
+	
+	regs.eax = 0xf0f0;
+	regs.ebx = 0x0000;
+	regs.ecx = 0x0000;
+	flag = tosh_smm(&regs);
+
+	/* if this is not a Toshiba laptop carry flag is set and ah=0x86 */
+
+	if ((flag==1) || ((regs.eax & 0xff00)==0x8600)) {
+		printk("toshiba: not a supported Toshiba laptop\n");
+		return -ENODEV;
+	}
+
+	/* if we get this far then we are running on a Toshiba (probably)! */
+
+	tosh_sci = regs.edx & 0xffff;
+	
+	/* next get the machine ID of the current laptop */
+
+	tosh_id = tosh_get_machine_id();
+
+	/* get the BIOS version */
+
+	major = isa_readb(0xfe009)-'0';
+	minor = ((isa_readb(0xfe00b)-'0')*10)+(isa_readb(0xfe00c)-'0');
+	tosh_bios = (major*0x100)+minor;
+
+	/* get the BIOS date */
+
+	day = ((isa_readb(0xffff5)-'0')*10)+(isa_readb(0xffff6)-'0');
+	month = ((isa_readb(0xffff8)-'0')*10)+(isa_readb(0xffff9)-'0');
+	year = ((isa_readb(0xffffb)-'0')*10)+(isa_readb(0xffffc)-'0');
+	tosh_date = (((year-90) & 0x1f)<<10) | ((month & 0xf)<<6)
+		| ((day & 0x1f)<<1);
+
+
+	/* in theory we should check the ports we are going to use for the
+	   fn key detection (and the fan on the Portage 610/Tecra700), and
+	   then request them to stop other drivers using them. However as
+	   the keyboard driver grabs 0x60-0x6f and the pic driver grabs
+	   0xa0-0xbf we can't. We just have to live dangerously and use the
+	   ports anyway, oh boy! */
+
+	/* do we need to emulate the fan? */
+
+	if ((tosh_id==0xfccb) || (tosh_id==0xfccc))
+		tosh_fan = 1;
+
+	return 0;
+}
+
+int __init tosh_init(void)
+{
+	int retval;
+	/* are we running on a Toshiba laptop */
+
+	if (tosh_probe()!=0)
+		return -EIO;
+
+	printk(KERN_INFO "Toshiba System Managment Mode driver v"
+		TOSH_VERSION"\n");
+
+	/* set the port to use for Fn status if not specified as a parameter */
+	if (tosh_fn==0x00)
+		tosh_set_fn_port();
+
+	/* register the device file */
+	retval = misc_register(&tosh_device);
+	if(retval < 0)
+		return retval;
+
+#ifdef CONFIG_PROC_FS
+	/* register the proc entry */
+	if(create_proc_info_entry("toshiba", 0, NULL, tosh_get_info) == NULL){
+		misc_deregister(&tosh_device);
+		return -ENOMEM;
+	}
+#endif
+
+	return 0;
+}
+
+#ifdef MODULE
+int init_module(void)
+{
+	return tosh_init();
+}
+
+void cleanup_module(void)
+{
+	/* remove the proc entry */
+
+	remove_proc_entry("toshiba", NULL);
+
+	/* unregister the device file */
+
+	misc_deregister(&tosh_device);
+}
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(tosh_fn, "User specified Fn key detection port");
+MODULE_AUTHOR("Jonathan Buzzard <jonathan@buzzard.org.uk>");
+MODULE_DESCRIPTION("Toshiba laptop SMM driver");
+MODULE_SUPPORTED_DEVICE("toshiba");
+