Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block

Pull block driver updates from Jens Axboe:
 "Pretty calm round, mostly just NVMe and a bit of MD:

   - NVMe updates (via Christoph)
        - improve the APST configuration algorithm (Alexey Bogoslavsky)
        - look for StorageD3Enable on companion ACPI device
          (Mario Limonciello)
        - allow selecting the network interface for TCP connections
          (Martin Belanger)
        - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
          Christoph)
        - move the ACPI StorageD3 code to drivers/acpi/ and add quirks
          for certain AMD CPUs (Mario Limonciello)
        - zoned device support for nvmet (Chaitanya Kulkarni)
        - fix the rules for changing the serial number in nvmet
          (Noam Gottlieb)
        - various small fixes and cleanups (Dan Carpenter, JK Kim,
          Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
          Uytterhoeven, Daniel Wagner)

   - MD updates (Via Song)
        - iostats rewrite (Guoqing Jiang)
        - raid5 lock contention optimization (Gal Ofri)

   - Fall through warning fix (Gustavo)

   - Misc fixes (Gustavo, Jiapeng)"

* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
  nvmet: use NVMET_MAX_NAMESPACES to set nn value
  loop: Fix missing discard support when using LOOP_CONFIGURE
  nvme.h: add missing nvme_lba_range_type endianness annotations
  nvme: remove zeroout memset call for struct
  nvme-pci: remove zeroout memset call for struct
  nvmet: remove zeroout memset call for struct
  nvmet: add ZBD over ZNS backend support
  nvmet: add Command Set Identifier support
  nvmet: add nvmet_req_bio put helper for backends
  nvmet: add req cns error complete helper
  block: export blk_next_bio()
  nvmet: remove local variable
  nvmet: use nvme status value directly
  nvmet: use u32 type for the local variable nsid
  nvmet: use u32 for nvmet_subsys max_nsid
  nvmet: use req->cmd directly in file-ns fast path
  nvmet: use req->cmd directly in bdev-ns fast path
  nvmet: make ver stable once connection established
  nvmet: allow mn change if subsys not discovered
  nvmet: make sn stable once connection was established
  ...

3 files changed, 66 insertions, 0 deletions

diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 675a69de516f..0028b6b51c87 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -1368,4 +1368,36 @@ int acpi_dev_pm_attach(struct device *dev, bool power_on)
 	return 1;
 }
 EXPORT_SYMBOL_GPL(acpi_dev_pm_attach);
+
+/**
+ * acpi_storage_d3 - Check if D3 should be used in the suspend path
+ * @dev: Device to check
+ *
+ * Return %true if the platform firmware wants @dev to be programmed
+ * into D3hot or D3cold (if supported) in the suspend path, or %false
+ * when there is no specific preference. On some platforms, if this
+ * hint is ignored, @dev may remain unresponsive after suspending the
+ * platform as a whole.
+ *
+ * Although the property has storage in the name it actually is
+ * applied to the PCIe slot and plugging in a non-storage device the
+ * same platform restrictions will likely apply.
+ */
+bool acpi_storage_d3(struct device *dev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+	u8 val;
+
+	if (force_storage_d3())
+		return true;
+
+	if (!adev)
+		return false;
+	if (fwnode_property_read_u8(acpi_fwnode_handle(adev), "StorageD3Enable",
+			&val))
+		return false;
+	return val == 1;
+}
+EXPORT_SYMBOL_GPL(acpi_storage_d3);
+
 #endif /* CONFIG_PM */
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index b1d2cc342014..d91b560e8867 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -234,6 +234,15 @@ static inline int suspend_nvs_save(void) { return 0; }
 static inline void suspend_nvs_restore(void) {}
 #endif
 
+#ifdef CONFIG_X86
+bool force_storage_d3(void);
+#else
+static inline bool force_storage_d3(void)
+{
+	return false;
+}
+#endif
+
 /*--------------------------------------------------------------------------
 				Device properties
   -------------------------------------------------------------------------- */
diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c
index bdc1ba00aee9..f22f23933063 100644
--- a/drivers/acpi/x86/utils.c
+++ b/drivers/acpi/x86/utils.c
@@ -135,3 +135,28 @@ bool acpi_device_always_present(struct acpi_device *adev)
 
 	return ret;
 }
+
+/*
+ * AMD systems from Renoir and Lucienne *require* that the NVME controller
+ * is put into D3 over a Modern Standby / suspend-to-idle cycle.
+ *
+ * This is "typically" accomplished using the `StorageD3Enable`
+ * property in the _DSD that is checked via the `acpi_storage_d3` function
+ * but this property was introduced after many of these systems launched
+ * and most OEM systems don't have it in their BIOS.
+ *
+ * The Microsoft documentation for StorageD3Enable mentioned that Windows has
+ * a hardcoded allowlist for D3 support, which was used for these platforms.
+ *
+ * This allows quirking on Linux in a similar fashion.
+ */
+static const struct x86_cpu_id storage_d3_cpu_ids[] = {
+	X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL),	/* Renoir */
+	X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL),	/* Lucienne */
+	{}
+};
+
+bool force_storage_d3(void)
+{
+	return x86_match_cpu(storage_d3_cpu_ids);
+}