ACPICA: create acpica/ directory

also, delete sleep/ and delete ACPI_CFLAGS from Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 0 insertions, 561 deletions

diff --git a/drivers/acpi/resources/rsmisc.c b/drivers/acpi/resources/rsmisc.c
deleted file mode 100644
index 2cd6e8cfaba1..000000000000
--- a/drivers/acpi/resources/rsmisc.c
+++ /dev/null
@@ -1,561 +0,0 @@
-/*******************************************************************************
- *
- * Module Name: rsmisc - Miscellaneous resource descriptors
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acresrc.h>
-
-#define _COMPONENT          ACPI_RESOURCES
-ACPI_MODULE_NAME("rsmisc")
-#define INIT_RESOURCE_TYPE(i)       i->resource_offset
-#define INIT_RESOURCE_LENGTH(i)     i->aml_offset
-#define INIT_TABLE_LENGTH(i)        i->value
-#define COMPARE_OPCODE(i)           i->resource_offset
-#define COMPARE_TARGET(i)           i->aml_offset
-#define COMPARE_VALUE(i)            i->value
-/*******************************************************************************
- *
- * FUNCTION:    acpi_rs_convert_aml_to_resource
- *
- * PARAMETERS:  Resource            - Pointer to the resource descriptor
- *              Aml                 - Where the AML descriptor is returned
- *              Info                - Pointer to appropriate conversion table
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Convert an external AML resource descriptor to the corresponding
- *              internal resource descriptor
- *
- ******************************************************************************/
-acpi_status
-acpi_rs_convert_aml_to_resource(struct acpi_resource *resource,
-				union aml_resource *aml,
-				struct acpi_rsconvert_info *info)
-{
-	acpi_rs_length aml_resource_length;
-	void *source;
-	void *destination;
-	char *target;
-	u8 count;
-	u8 flags_mode = FALSE;
-	u16 item_count = 0;
-	u16 temp16 = 0;
-
-	ACPI_FUNCTION_TRACE(rs_convert_aml_to_resource);
-
-	if (((acpi_size) resource) & 0x3) {
-
-		/* Each internal resource struct is expected to be 32-bit aligned */
-
-		ACPI_WARNING((AE_INFO,
-			      "Misaligned resource pointer (get): %p Type %2.2X Len %X",
-			      resource, resource->type, resource->length));
-	}
-
-	/* Extract the resource Length field (does not include header length) */
-
-	aml_resource_length = acpi_ut_get_resource_length(aml);
-
-	/*
-	 * First table entry must be ACPI_RSC_INITxxx and must contain the
-	 * table length (# of table entries)
-	 */
-	count = INIT_TABLE_LENGTH(info);
-
-	while (count) {
-		/*
-		 * Source is the external AML byte stream buffer,
-		 * destination is the internal resource descriptor
-		 */
-		source = ACPI_ADD_PTR(void, aml, info->aml_offset);
-		destination =
-		    ACPI_ADD_PTR(void, resource, info->resource_offset);
-
-		switch (info->opcode) {
-		case ACPI_RSC_INITGET:
-			/*
-			 * Get the resource type and the initial (minimum) length
-			 */
-			ACPI_MEMSET(resource, 0, INIT_RESOURCE_LENGTH(info));
-			resource->type = INIT_RESOURCE_TYPE(info);
-			resource->length = INIT_RESOURCE_LENGTH(info);
-			break;
-
-		case ACPI_RSC_INITSET:
-			break;
-
-		case ACPI_RSC_FLAGINIT:
-
-			flags_mode = TRUE;
-			break;
-
-		case ACPI_RSC_1BITFLAG:
-			/*
-			 * Mask and shift the flag bit
-			 */
-			ACPI_SET8(destination) = (u8)
-			    ((ACPI_GET8(source) >> info->value) & 0x01);
-			break;
-
-		case ACPI_RSC_2BITFLAG:
-			/*
-			 * Mask and shift the flag bits
-			 */
-			ACPI_SET8(destination) = (u8)
-			    ((ACPI_GET8(source) >> info->value) & 0x03);
-			break;
-
-		case ACPI_RSC_COUNT:
-
-			item_count = ACPI_GET8(source);
-			ACPI_SET8(destination) = (u8) item_count;
-
-			resource->length = resource->length +
-			    (info->value * (item_count - 1));
-			break;
-
-		case ACPI_RSC_COUNT16:
-
-			item_count = aml_resource_length;
-			ACPI_SET16(destination) = item_count;
-
-			resource->length = resource->length +
-			    (info->value * (item_count - 1));
-			break;
-
-		case ACPI_RSC_LENGTH:
-
-			resource->length = resource->length + info->value;
-			break;
-
-		case ACPI_RSC_MOVE8:
-		case ACPI_RSC_MOVE16:
-		case ACPI_RSC_MOVE32:
-		case ACPI_RSC_MOVE64:
-			/*
-			 * Raw data move. Use the Info value field unless item_count has
-			 * been previously initialized via a COUNT opcode
-			 */
-			if (info->value) {
-				item_count = info->value;
-			}
-			acpi_rs_move_data(destination, source, item_count,
-					  info->opcode);
-			break;
-
-		case ACPI_RSC_SET8:
-
-			ACPI_MEMSET(destination, info->aml_offset, info->value);
-			break;
-
-		case ACPI_RSC_DATA8:
-
-			target = ACPI_ADD_PTR(char, resource, info->value);
-			ACPI_MEMCPY(destination, source, ACPI_GET16(target));
-			break;
-
-		case ACPI_RSC_ADDRESS:
-			/*
-			 * Common handler for address descriptor flags
-			 */
-			if (!acpi_rs_get_address_common(resource, aml)) {
-				return_ACPI_STATUS
-				    (AE_AML_INVALID_RESOURCE_TYPE);
-			}
-			break;
-
-		case ACPI_RSC_SOURCE:
-			/*
-			 * Optional resource_source (Index and String)
-			 */
-			resource->length +=
-			    acpi_rs_get_resource_source(aml_resource_length,
-							info->value,
-							destination, aml, NULL);
-			break;
-
-		case ACPI_RSC_SOURCEX:
-			/*
-			 * Optional resource_source (Index and String). This is the more
-			 * complicated case used by the Interrupt() macro
-			 */
-			target =
-			    ACPI_ADD_PTR(char, resource,
-					 info->aml_offset + (item_count * 4));
-
-			resource->length +=
-			    acpi_rs_get_resource_source(aml_resource_length,
-							(acpi_rs_length) (((item_count - 1) * sizeof(u32)) + info->value), destination, aml, target);
-			break;
-
-		case ACPI_RSC_BITMASK:
-			/*
-			 * 8-bit encoded bitmask (DMA macro)
-			 */
-			item_count =
-			    acpi_rs_decode_bitmask(ACPI_GET8(source),
-						   destination);
-			if (item_count) {
-				resource->length += (item_count - 1);
-			}
-
-			target = ACPI_ADD_PTR(char, resource, info->value);
-			ACPI_SET8(target) = (u8) item_count;
-			break;
-
-		case ACPI_RSC_BITMASK16:
-			/*
-			 * 16-bit encoded bitmask (IRQ macro)
-			 */
-			ACPI_MOVE_16_TO_16(&temp16, source);
-
-			item_count =
-			    acpi_rs_decode_bitmask(temp16, destination);
-			if (item_count) {
-				resource->length += (item_count - 1);
-			}
-
-			target = ACPI_ADD_PTR(char, resource, info->value);
-			ACPI_SET8(target) = (u8) item_count;
-			break;
-
-		case ACPI_RSC_EXIT_NE:
-			/*
-			 * Control - Exit conversion if not equal
-			 */
-			switch (info->resource_offset) {
-			case ACPI_RSC_COMPARE_AML_LENGTH:
-				if (aml_resource_length != info->value) {
-					goto exit;
-				}
-				break;
-
-			case ACPI_RSC_COMPARE_VALUE:
-				if (ACPI_GET8(source) != info->value) {
-					goto exit;
-				}
-				break;
-
-			default:
-
-				ACPI_ERROR((AE_INFO,
-					    "Invalid conversion sub-opcode"));
-				return_ACPI_STATUS(AE_BAD_PARAMETER);
-			}
-			break;
-
-		default:
-
-			ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
-			return_ACPI_STATUS(AE_BAD_PARAMETER);
-		}
-
-		count--;
-		info++;
-	}
-
-      exit:
-	if (!flags_mode) {
-
-		/* Round the resource struct length up to the next boundary (32 or 64) */
-
-		resource->length =
-		    (u32) ACPI_ROUND_UP_TO_NATIVE_WORD(resource->length);
-	}
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_rs_convert_resource_to_aml
- *
- * PARAMETERS:  Resource            - Pointer to the resource descriptor
- *              Aml                 - Where the AML descriptor is returned
- *              Info                - Pointer to appropriate conversion table
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Convert an internal resource descriptor to the corresponding
- *              external AML resource descriptor.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
-				union aml_resource *aml,
-				struct acpi_rsconvert_info *info)
-{
-	void *source = NULL;
-	void *destination;
-	acpi_rsdesc_size aml_length = 0;
-	u8 count;
-	u16 temp16 = 0;
-	u16 item_count = 0;
-
-	ACPI_FUNCTION_TRACE(rs_convert_resource_to_aml);
-
-	/*
-	 * First table entry must be ACPI_RSC_INITxxx and must contain the
-	 * table length (# of table entries)
-	 */
-	count = INIT_TABLE_LENGTH(info);
-
-	while (count) {
-		/*
-		 * Source is the internal resource descriptor,
-		 * destination is the external AML byte stream buffer
-		 */
-		source = ACPI_ADD_PTR(void, resource, info->resource_offset);
-		destination = ACPI_ADD_PTR(void, aml, info->aml_offset);
-
-		switch (info->opcode) {
-		case ACPI_RSC_INITSET:
-
-			ACPI_MEMSET(aml, 0, INIT_RESOURCE_LENGTH(info));
-			aml_length = INIT_RESOURCE_LENGTH(info);
-			acpi_rs_set_resource_header(INIT_RESOURCE_TYPE(info),
-						    aml_length, aml);
-			break;
-
-		case ACPI_RSC_INITGET:
-			break;
-
-		case ACPI_RSC_FLAGINIT:
-			/*
-			 * Clear the flag byte
-			 */
-			ACPI_SET8(destination) = 0;
-			break;
-
-		case ACPI_RSC_1BITFLAG:
-			/*
-			 * Mask and shift the flag bit
-			 */
-			ACPI_SET8(destination) |= (u8)
-			    ((ACPI_GET8(source) & 0x01) << info->value);
-			break;
-
-		case ACPI_RSC_2BITFLAG:
-			/*
-			 * Mask and shift the flag bits
-			 */
-			ACPI_SET8(destination) |= (u8)
-			    ((ACPI_GET8(source) & 0x03) << info->value);
-			break;
-
-		case ACPI_RSC_COUNT:
-
-			item_count = ACPI_GET8(source);
-			ACPI_SET8(destination) = (u8) item_count;
-
-			aml_length =
-			    (u16) (aml_length +
-				   (info->value * (item_count - 1)));
-			break;
-
-		case ACPI_RSC_COUNT16:
-
-			item_count = ACPI_GET16(source);
-			aml_length = (u16) (aml_length + item_count);
-			acpi_rs_set_resource_length(aml_length, aml);
-			break;
-
-		case ACPI_RSC_LENGTH:
-
-			acpi_rs_set_resource_length(info->value, aml);
-			break;
-
-		case ACPI_RSC_MOVE8:
-		case ACPI_RSC_MOVE16:
-		case ACPI_RSC_MOVE32:
-		case ACPI_RSC_MOVE64:
-
-			if (info->value) {
-				item_count = info->value;
-			}
-			acpi_rs_move_data(destination, source, item_count,
-					  info->opcode);
-			break;
-
-		case ACPI_RSC_ADDRESS:
-
-			/* Set the Resource Type, General Flags, and Type-Specific Flags */
-
-			acpi_rs_set_address_common(aml, resource);
-			break;
-
-		case ACPI_RSC_SOURCEX:
-			/*
-			 * Optional resource_source (Index and String)
-			 */
-			aml_length =
-			    acpi_rs_set_resource_source(aml, (acpi_rs_length)
-							aml_length, source);
-			acpi_rs_set_resource_length(aml_length, aml);
-			break;
-
-		case ACPI_RSC_SOURCE:
-			/*
-			 * Optional resource_source (Index and String). This is the more
-			 * complicated case used by the Interrupt() macro
-			 */
-			aml_length =
-			    acpi_rs_set_resource_source(aml, info->value,
-							source);
-			acpi_rs_set_resource_length(aml_length, aml);
-			break;
-
-		case ACPI_RSC_BITMASK:
-			/*
-			 * 8-bit encoded bitmask (DMA macro)
-			 */
-			ACPI_SET8(destination) = (u8)
-			    acpi_rs_encode_bitmask(source,
-						   *ACPI_ADD_PTR(u8, resource,
-								 info->value));
-			break;
-
-		case ACPI_RSC_BITMASK16:
-			/*
-			 * 16-bit encoded bitmask (IRQ macro)
-			 */
-			temp16 = acpi_rs_encode_bitmask(source,
-							*ACPI_ADD_PTR(u8,
-								      resource,
-								      info->
-								      value));
-			ACPI_MOVE_16_TO_16(destination, &temp16);
-			break;
-
-		case ACPI_RSC_EXIT_LE:
-			/*
-			 * Control - Exit conversion if less than or equal
-			 */
-			if (item_count <= info->value) {
-				goto exit;
-			}
-			break;
-
-		case ACPI_RSC_EXIT_NE:
-			/*
-			 * Control - Exit conversion if not equal
-			 */
-			switch (COMPARE_OPCODE(info)) {
-			case ACPI_RSC_COMPARE_VALUE:
-
-				if (*ACPI_ADD_PTR(u8, resource,
-						  COMPARE_TARGET(info)) !=
-				    COMPARE_VALUE(info)) {
-					goto exit;
-				}
-				break;
-
-			default:
-
-				ACPI_ERROR((AE_INFO,
-					    "Invalid conversion sub-opcode"));
-				return_ACPI_STATUS(AE_BAD_PARAMETER);
-			}
-			break;
-
-		case ACPI_RSC_EXIT_EQ:
-			/*
-			 * Control - Exit conversion if equal
-			 */
-			if (*ACPI_ADD_PTR(u8, resource,
-					  COMPARE_TARGET(info)) ==
-			    COMPARE_VALUE(info)) {
-				goto exit;
-			}
-			break;
-
-		default:
-
-			ACPI_ERROR((AE_INFO, "Invalid conversion opcode"));
-			return_ACPI_STATUS(AE_BAD_PARAMETER);
-		}
-
-		count--;
-		info++;
-	}
-
-      exit:
-	return_ACPI_STATUS(AE_OK);
-}
-
-#if 0
-/* Previous resource validations */
-
-if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
-	return_ACPI_STATUS(AE_SUPPORT);
-}
-
-if (resource->data.start_dpf.performance_robustness >= 3) {
-	return_ACPI_STATUS(AE_AML_BAD_RESOURCE_VALUE);
-}
-
-if (((aml->irq.flags & 0x09) == 0x00) || ((aml->irq.flags & 0x09) == 0x09)) {
-	/*
-	 * Only [active_high, edge_sensitive] or [active_low, level_sensitive]
-	 * polarity/trigger interrupts are allowed (ACPI spec, section
-	 * "IRQ Format"), so 0x00 and 0x09 are illegal.
-	 */
-	ACPI_ERROR((AE_INFO,
-		    "Invalid interrupt polarity/trigger in resource list, %X",
-		    aml->irq.flags));
-	return_ACPI_STATUS(AE_BAD_DATA);
-}
-
-resource->data.extended_irq.interrupt_count = temp8;
-if (temp8 < 1) {
-
-	/* Must have at least one IRQ */
-
-	return_ACPI_STATUS(AE_AML_BAD_RESOURCE_LENGTH);
-}
-
-if (resource->data.dma.transfer == 0x03) {
-	ACPI_ERROR((AE_INFO, "Invalid DMA.Transfer preference (3)"));
-	return_ACPI_STATUS(AE_BAD_DATA);
-}
-#endif