diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2013-04-19 13:35:57 +0200 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2013-04-19 14:33:09 +0200 |
| commit | 56b690481c4baed815b9e4acf5ea89eadb58ba17 (patch) | |
| tree | a543108af0789de129150ec4662230eeafeae877 /arch | |
| parent | 408e713545ca0bebe6034935c65e7e95c70d253b (diff) | |
| parent | bd51de53e1be9896d815bbea30560262216d4616 (diff) | |
Merge branch 'samsung/exynos-multiplatform' into next/multiplatform
These patches get us closer to adding multiplatform support on
the Exynos platform, they are part of a longer series of
patches. This would get all the simple stuff out of the
way, and I don't think there is a big risk of introducing
regressions with these.
A lot of the other patches have already been merged into
subsystem trees. After this series in in arm-soc, what is
left comes down to
* The ASoC conversion to dmaengine won't make it unless someone
who knows that code better steps up to do it right away. This
means that we won't have audio in a 3.10 multiplatform kernel
on Exynos, but it will still work for users that don't enable
multiplatform.
* The irqchip (combiner), clk and clksource patches are all based
on top of other changesets we pulled in from your trees, so I
would not make them part of the next/multiplatform branch. We can
apply them on top of the next/drivers branch once they are
tested successfully.
* A trivial patch is needed in the end to actually make
CONFIG_ARCH_EXYNOS visible in multiplatform configurations.
We will do that as a separate patch once everything else is
there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch')
35 files changed, 139 insertions, 355 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 88b662d4618d..21a48d1bde43 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -776,18 +776,11 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS +config ARCH_EXYNOS_SINGLE bool "Samsung EXYNOS" - select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_SPARSEMEM_ENABLE - select CLKDEV_LOOKUP - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e00bd4d4ab63..54d6fdc03e04 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -348,6 +348,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -359,6 +360,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -370,6 +372,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -381,6 +384,7 @@ choice config DEBUG_S3C_UART3 depends on PLAT_SAMSUNG && ARCH_EXYNOS + select DEBUG_EXYNOS_UART bool "Use S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -510,6 +514,9 @@ choice endchoice +config DEBUG_EXYNOS_UART + bool + config DEBUG_IMX_UART_PORT int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -607,6 +614,7 @@ config DEBUG_LL_INCLUDE string default "debug/bcm2835.S" if DEBUG_BCM2835 default "debug/cns3xxx.S" if DEBUG_CNS3XXX + default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index bffe68e190a3..ae90a0f7d53c 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -4,7 +4,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_EXYNOS_SINGLE=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_ARMLEX4210=y diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/include/debug/exynos.S index e0c86ea475e7..b17fdb7fbd34 100644 --- a/arch/arm/mach-exynos/include/mach/debug-macro.S +++ b/arch/arm/include/debug/exynos.S @@ -1,10 +1,7 @@ -/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S - * +/* * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -12,7 +9,10 @@ /* pull in the relevant register and map files. */ -#include <mach/map.h> +#define S3C_ADDR_BASE 0xF6000000 +#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000 +#define EXYNOS4_PA_UART 0x13800000 +#define EXYNOS5_PA_UART 0x12C00000 /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 @@ -36,4 +36,4 @@ #define fifo_full fifo_full_s5pv210 #define fifo_level fifo_level_s5pv210 -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/include/debug/samsung.S index f3a9cff6d5d4..f3a9cff6d5d4 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/include/debug/samsung.S diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 54cf73e7a791..9cfbb33a9eea 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,6 +7,20 @@ # Configuration options for the EXYNOS4 +config ARCH_EXYNOS + # TODO: make this visible after all drivers are converted + bool "Samsung EXYNOS" if ARCH_MULTI_V7 && BROKEN + default ARCH_EXYNOS_SINGLE + select ARCH_HAS_CPUFREQ + select CLKDEV_LOOKUP + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + help + Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) + if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" @@ -20,6 +34,9 @@ config ARCH_EXYNOS4 help Samsung EXYNOS4 SoCs based systems +config ARCH_EXYNOS4_SINGLE + def_bool ARCH_EXYNOS4 && ARCH_EXYNOS_SINGLE + config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" select HAVE_ARM_SCU if SMP @@ -37,7 +54,7 @@ config CPU_EXYNOS4210 select PM_GENERIC_DOMAINS select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV + select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE help Enable EXYNOS4210 CPU support @@ -47,7 +64,7 @@ config SOC_EXYNOS4212 depends on ARCH_EXYNOS4 select S5P_PM if PM select S5P_SLEEP if PM - select SAMSUNG_DMADEV + select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE help Enable EXYNOS4212 SoC support @@ -55,7 +72,7 @@ config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 - select SAMSUNG_DMADEV + select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE help Enable EXYNOS4412 SoC support @@ -66,7 +83,7 @@ config SOC_EXYNOS5250 select S5P_PM if PM select S5P_SLEEP if PM select S5P_DEV_MFC - select SAMSUNG_DMADEV + select SAMSUNG_DMADEV if ARCH_EXYNOS_SINGLE help Enable EXYNOS5250 SoC support @@ -87,6 +104,19 @@ config EXYNOS4_MCT help Use MCT (Multi Core Timer) as kernel timers +config EXYNOS_ATAGS + bool "ATAGS based boot for EXYNOS (deprecated)" + depends on !ARCH_MULTIPLATFORM + depends on ATAGS + default y + help + The EXYNOS platform is moving towards being completely probed + through device tree. This enables support for board files using + the traditional ATAGS boot format. + Note that this option is not available for multiplatform builds. + +if EXYNOS_ATAGS + config EXYNOS_DEV_DMA bool help @@ -402,6 +432,8 @@ config MACH_SMDK4412 Machine support for Samsung SMDK4412 endif +endif + comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 435757e57bb4..57e9124d95e0 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -4,6 +4,7 @@ # http://www.samsung.com/ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include obj-y := obj-m := @@ -48,12 +49,12 @@ obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o # device support obj-y += dev-uart.o -obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o +obj-$(CONFIG_ARCH_EXYNOS4_SINGLE) += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o +obj-$(CONFIG_ARCH_EXYNOS_SINGLE) += setup-i2c0.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index d63d399c7bae..83bd3f0e1519 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -368,6 +368,9 @@ static void __init exynos4_map_io(void) else iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1)); + if (!IS_ENABLED(CONFIG_EXYNOS_ATAGS)) + return + /* initialize device information early */ exynos4_default_sdhci0(); exynos4_default_sdhci1(); @@ -570,6 +573,8 @@ static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no) s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no); } + +#ifdef CONFIG_EXYNOS_ATAGS static void __iomem *exynos_eint_base; static DEFINE_SPINLOCK(eint_lock); @@ -875,3 +880,4 @@ static int __init exynos_init_irq_eint(void) return 0; } arch_initcall(exynos_init_irq_eint); +#endif diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c index 7c42f4b7c8be..c48aff02c786 100644 --- a/arch/arm/mach-exynos/dev-uart.c +++ b/arch/arm/mach-exynos/dev-uart.c @@ -20,6 +20,7 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/devs.h> diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 1f4dc35cd4b9..8bd5dde5fc78 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -466,7 +466,10 @@ #define IRQ_TIMER_BASE (IRQ_GPIO_END + 64) /* Set the default NR_IRQS */ +#define EXYNOS_NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) -#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT) +#ifndef CONFIG_SPARSE_IRQ +#define NR_IRQS EXYNOS_NR_IRQS +#endif #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index 685f29173afa..2126f3503a3f 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -25,6 +25,7 @@ #include <plat/regs-srom.h> #include <plat/sdhci.h> +#include <mach/irqs.h> #include <mach/map.h> #include "common.h" diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 1ea79730187f..ab920e34bd0a 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -53,6 +53,7 @@ #include <plat/fimc-core.h> #include <plat/camport.h> +#include <mach/irqs.h> #include <mach/map.h> #include "common.h" diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 579d2d171daa..f23ce40139c3 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -46,6 +46,7 @@ #include <plat/hdmi.h> #include <mach/map.h> +#include <mach/irqs.h> #include <drm/exynos_drm.h> #include "common.h" diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index fe6149624b84..5df91236dbb4 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -39,6 +39,7 @@ #include <plat/regs-serial.h> #include <plat/sdhci.h> +#include <mach/irqs.h> #include <mach/map.h> #include <drm/exynos_drm.h> diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index d71672922b19..9a1d3596d4ca 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -43,6 +43,7 @@ #include <plat/clock.h> #include <plat/hdmi.h> +#include <mach/irqs.h> #include <mach/map.h> #include <drm/exynos_drm.h> diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c index e8d08bf8965a..d5b98c866738 100644 --- a/arch/arm/mach-exynos/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos/setup-sdhci-gpio.c @@ -19,8 +19,8 @@ #include <linux/mmc/host.h> #include <linux/mmc/card.h> +#include <mach/gpio.h> #include <plat/gpio-cfg.h> -#include <plat/regs-sdhci.h> #include <plat/sdhci.h> void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S index 13ed33c69113..2558952e3147 100644 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S @@ -98,4 +98,4 @@ /* include the reset of the code which will do the work */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index c0c076a90f27..dd9ccca5de1f 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -35,4 +35,4 @@ * will be fine with us. */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S index e80ba3c69814..5e2916fb19a9 100644 --- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S @@ -30,4 +30,4 @@ #endif .endm -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 694f75937000..66cb7f16bf2a 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -36,4 +36,4 @@ * will be fine with us. */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c index 03c02d04c68c..6010c0310cb5 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pc100/setup-sdhci-gpio.c @@ -19,7 +19,6 @@ #include <linux/mmc/card.h> #include <plat/gpio-cfg.h> -#include <plat/regs-sdhci.h> #include <plat/sdhci.h> void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 79e55597ab63..80c21996c943 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -38,4 +38,4 @@ * will be fine with us. */ -#include <plat/debug-macro.S> +#include <debug/samsung.S> diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c index 3e3ac05bb7b1..0512ada00522 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c +++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c @@ -20,7 +20,6 @@ #include <linux/mmc/card.h> #include <plat/gpio-cfg.h> -#include <plat/regs-sdhci.h> #include <plat/sdhci.h> void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index a9d52167e16e..8aae6816ebc2 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -13,6 +13,10 @@ config PLAT_SAMSUNG help Base platform code for all Samsung SoC based systems +config PLAT_SAMSUNG_SINGLE + def_bool PLAT_SAMSUNG && !ARCH_MULTIPLATFORM + + config PLAT_S5P bool depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS) @@ -23,7 +27,7 @@ config PLAT_S5P select GIC_NON_BANKED if ARCH_EXYNOS4 select NO_IOPORT select PLAT_SAMSUNG - select S3C_GPIO_TRACK + select S3C_GPIO_TRACK if PLAT_SAMSUNG_SINGLE select S5P_GPIO_DRVSTR select SAMSUNG_CLKSRC select SAMSUNG_GPIOLIB_4BIT @@ -178,6 +182,7 @@ config S5P_DEV_UART config S3C_ADC bool "ADC common driver support" + depends on PLAT_SAMSUNG_SINGLE help Core support for the ADC block found in the Samsung SoC systems for drivers such as the touchscreen and hwmon to use to share diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 3a7c64d1814a..cf684b2eb6fc 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -4,6 +4,9 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include +ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include + obj-y := obj-m := obj-n := dummy.o @@ -34,7 +37,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-y += platformdata.o -obj-y += devs.o +obj-$(CONFIG_PLAT_SAMSUNG_SINGLE) += devs.o obj-y += dev-uart.o obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o obj-$(CONFIG_S5P_DEV_UART) += s5p-dev-uart.o @@ -51,9 +54,10 @@ obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support - obj-$(CONFIG_PM) += pm.o +ifdef CONFIG_PLAT_SAMSUNG_SINGLE obj-$(CONFIG_PM) += pm-gpio.o +endif obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 51afedda9ab6..de9ad27495e7 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -878,51 +878,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) } #endif /* CONFIG_PLAT_S3C24XX */ -/* MFC */ - -#ifdef CONFIG_S5P_DEV_MFC -static struct resource s5p_mfc_resource[] = { - [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), - [1] = DEFINE_RES_IRQ(IRQ_MFC), -}; - -struct platform_device s5p_device_mfc = { - .name = "s5p-mfc", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_mfc_resource), - .resource = s5p_mfc_resource, -}; - -/* - * MFC hardware has 2 memory interfaces which are modelled as two separate - * platform devices to let dma-mapping distinguish between them. - * - * MFC parent device (s5p_device_mfc) must be registered before memory - * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). - */ - -struct platform_device s5p_device_mfc_l = { - .name = "s5p-mfc-l", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device s5p_device_mfc_r = { - .name = "s5p-mfc-r", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &samsung_device_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -#endif /* CONFIG_S5P_DEV_MFC */ - /* MIPI CSIS */ #ifdef CONFIG_S5P_DEV_CSIS0 diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index f6fcadeee969..266a4e3e2458 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -166,6 +166,7 @@ extern void s3c_pm_check_store(void); */ extern void s3c_pm_configure_extint(void); +#ifdef CONFIG_PLAT_SAMSUNG_SINGLE /** * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. * @@ -181,6 +182,10 @@ extern void samsung_pm_restore_gpios(void); * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios(). */ extern void samsung_pm_save_gpios(void); +#else +#define samsung_pm_restore_gpios() do { } while(0) +#define samsung_pm_save_gpios() do { } while(0) +#endif extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-samsung/include/plat/regs-onenand.h b/arch/arm/plat-samsung/include/plat/regs-onenand.h deleted file mode 100644 index 930ea8b88ed3..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-onenand.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h - * - * Copyright (C) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __SAMSUNG_ONENAND_H__ -#define __SAMSUNG_ONENAND_H__ - -#include <mach/hardware.h> - -/* - * OneNAND Controller - */ -#define MEM_CFG_OFFSET 0x0000 -#define BURST_LEN_OFFSET 0x0010 -#define MEM_RESET_OFFSET 0x0020 -#define INT_ERR_STAT_OFFSET 0x0030 -#define INT_ERR_MASK_OFFSET 0x0040 -#define INT_ERR_ACK_OFFSET 0x0050 -#define ECC_ERR_STAT_OFFSET 0x0060 -#define MANUFACT_ID_OFFSET 0x0070 -#define DEVICE_ID_OFFSET 0x0080 -#define DATA_BUF_SIZE_OFFSET 0x0090 -#define BOOT_BUF_SIZE_OFFSET 0x00A0 -#define BUF_AMOUNT_OFFSET 0x00B0 -#define TECH_OFFSET 0x00C0 -#define FBA_WIDTH_OFFSET 0x00D0 -#define FPA_WIDTH_OFFSET 0x00E0 -#define FSA_WIDTH_OFFSET 0x00F0 -#define TRANS_SPARE_OFFSET 0x0140 -#define DBS_DFS_WIDTH_OFFSET 0x0160 -#define INT_PIN_ENABLE_OFFSET 0x01A0 -#define ACC_CLOCK_OFFSET 0x01C0 -#define FLASH_VER_ID_OFFSET 0x01F0 -#define FLASH_AUX_CNTRL_OFFSET 0x0300 /* s3c64xx only */ - -#define ONENAND_MEM_RESET_HOT 0x3 -#define ONENAND_MEM_RESET_COLD 0x2 -#define ONENAND_MEM_RESET_WARM 0x1 - -#define CACHE_OP_ERR (1 << 13) -#define RST_CMP (1 << 12) -#define RDY_ACT (1 << 11) -#define INT_ACT (1 << 10) -#define UNSUP_CMD (1 << 9) -#define LOCKED_BLK (1 << 8) -#define BLK_RW_CMP (1 << 7) -#define ERS_CMP (1 << 6) -#define PGM_CMP (1 << 5) -#define LOAD_CMP (1 << 4) -#define ERS_FAIL (1 << 3) -#define PGM_FAIL (1 << 2) -#define INT_TO (1 << 1) -#define LD_FAIL_ECC_ERR (1 << 0) - -#define TSRF (1 << 0) - -#endif diff --git a/arch/arm/plat-samsung/include/plat/regs-rtc.h b/arch/arm/plat-samsung/include/plat/regs-rtc.h deleted file mode 100644 index 0f8263e93eea..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-rtc.h +++ /dev/null @@ -1,71 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-rtc.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 Internal RTC register definition -*/ - -#ifndef __ASM_ARCH_REGS_RTC_H -#define __ASM_ARCH_REGS_RTC_H __FILE__ - -#define S3C2410_RTCREG(x) (x) -#define S3C2410_INTP S3C2410_RTCREG(0x30) -#define S3C2410_INTP_ALM (1 << 1) -#define S3C2410_INTP_TIC (1 << 0) - -#define S3C2410_RTCCON S3C2410_RTCREG(0x40) -#define S3C2410_RTCCON_RTCEN (1 << 0) -#define S3C2410_RTCCON_CNTSEL (1 << 2) -#define S3C2410_RTCCON_CLKRST (1 << 3) -#define S3C2443_RTCCON_TICSEL (1 << 4) -#define S3C64XX_RTCCON_TICEN (1 << 8) - -#define S3C2410_TICNT S3C2410_RTCREG(0x44) -#define S3C2410_TICNT_ENABLE (1 << 7) - -/* S3C2443: tick count is 15 bit wide - * TICNT[6:0] contains upper 7 bits - * TICNT1[7:0] contains lower 8 bits - */ -#define S3C2443_TICNT_PART(x) ((x & 0x7f00) >> 8) -#define S3C2443_TICNT1 S3C2410_RTCREG(0x4C) -#define S3C2443_TICNT1_PART(x) (x & 0xff) - -/* S3C2416: tick count is 32 bit wide - * TICNT[6:0] contains bits [14:8] - * TICNT1[7:0] contains lower 8 bits - * TICNT2[16:0] contains upper 17 bits - */ -#define S3C2416_TICNT2 S3C2410_RTCREG(0x48) -#define S3C2416_TICNT2_PART(x) ((x & 0xffff8000) >> 15) - -#define S3C2410_RTCALM S3C2410_RTCREG(0x50) -#define S3C2410_RTCALM_ALMEN (1 << 6) -#define S3C2410_RTCALM_YEAREN (1 << 5) -#define S3C2410_RTCALM_MONEN (1 << 4) -#define S3C2410_RTCALM_DAYEN (1 << 3) -#define S3C2410_RTCALM_HOUREN (1 << 2) -#define S3C2410_RTCALM_MINEN (1 << 1) -#define S3C2410_RTCALM_SECEN (1 << 0) - -#define S3C2410_ALMSEC S3C2410_RTCREG(0x54) -#define S3C2410_ALMMIN S3C2410_RTCREG(0x58) -#define S3C2410_ALMHOUR S3C2410_RTCREG(0x5c) - -#define S3C2410_ALMDATE S3C2410_RTCREG(0x60) -#define S3C2410_ALMMON S3C2410_RTCREG(0x64) -#define S3C2410_ALMYEAR S3C2410_RTCREG(0x68) - -#define S3C2410_RTCSEC S3C2410_RTCREG(0x70) -#define S3C2410_RTCMIN S3C2410_RTCREG(0x74) -#define S3C2410_RTCHOUR S3C2410_RTCREG(0x78) -#define S3C2410_RTCDATE S3C2410_RTCREG(0x7c) -#define S3C2410_RTCMON S3C2410_RTCREG(0x84) -#define S3C2410_RTCYEAR S3C2410_RTCREG(0x88) - -#endif /* __ASM_ARCH_REGS_RTC_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-sdhci.h b/arch/arm/plat-samsung/include/plat/regs-sdhci.h deleted file mode 100644 index e34049ad44cc..000000000000 --- a/arch/arm/plat-samsung/include/plat/regs-sdhci.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C Platform - SDHCI (HSMMC) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __PLAT_S3C_SDHCI_REGS_H -#define __PLAT_S3C_SDHCI_REGS_H __FILE__ - -#define S3C_SDHCI_CONTROL2 (0x80) -#define S3C_SDHCI_CONTROL3 (0x84) -#define S3C64XX_SDHCI_CONTROL4 (0x8C) - -#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) -#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) -#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) -#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) - -#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) -#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) -#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) - -#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) -#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) -#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) - -#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) -#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) -#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) -#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) -#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) - -#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) -#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) -#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) - -#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) -#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) -#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) -#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) -#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) -#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) -#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) -#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) - -#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) -#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) -#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) -#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) - -#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) -#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) -#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) - -#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) -#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) -#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) - -#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) -#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) -#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) - -#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) -#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) -#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) - -#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) -#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) - -#define S3C64XX_SDHCI_CONTROL4_BUSY (1) - -#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 9b87f38fc4f4..1e0aab08c13f 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -18,62 +18,9 @@ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ +#include <linux/platform_data/mmc-sdhci-s3c.h> #include <plat/devs.h> -struct platform_device; -struct mmc_host; -struct mmc_card; -struct mmc_ios; - -enum cd_types { - S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */ - S3C_SDHCI_CD_EXTERNAL, /* use external callback */ - S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */ - S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */ - S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ -}; - -/** - * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI - * @max_width: The maximum number of data bits supported. - * @host_caps: Standard MMC host capabilities bit field. - * @host_caps2: The second standard MMC host capabilities bit field. - * @cd_type: Type of Card Detection method (see cd_types enum above) - * @ext_cd_init: Initialize external card detect subsystem. Called on - * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. - * notify_func argument is a callback to the sdhci-s3c driver - * that triggers the card detection event. Callback arguments: - * dev is pointer to platform device of the host controller, - * state is new state of the card (0 - removed, 1 - inserted). - * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on - * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL. - * notify_func argument is the same callback as for ext_cd_init. - * @ext_cd_gpio: gpio pin used for external CD line, valid only if - * cd_type == S3C_SDHCI_CD_GPIO - * @ext_cd_gpio_invert: invert values for external CD gpio line - * @cfg_gpio: Configure the GPIO for a specific card bit-width - * - * Initialisation data specific to either the machine or the platform - * for the device driver to use or call-back when configuring gpio or - * card speed information. -*/ -struct s3c_sdhci_platdata { - unsigned int max_width; - unsigned int host_caps; - unsigned int host_caps2; - unsigned int pm_caps; - enum cd_types cd_type; - - int ext_cd_gpio; - bool ext_cd_gpio_invert; - int (*ext_cd_init)(void (*notify_func)(struct platform_device *, - int state)); - int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *, - int state)); - - void (*cfg_gpio)(struct platform_device *dev, int width); -}; - /* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data * @pd: The default platform data for this device. * @set: Pointer to the platform data to fill in. @@ -378,5 +325,4 @@ static inline void s3c_sdhci_setname(int id, char *name) break; } } - #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f980cf3d2baa..1113066240cf 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/cpu.h> #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 002b1472293b..53210ec4e8ec 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -27,6 +27,7 @@ #include <plat/regs-serial.h> #include <mach/regs-clock.h> #include <mach/regs-irq.h> +#include <mach/irqs.h> #include <asm/irq.h> #include <plat/pm.h> diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index 5ec104b5408b..a93fb6fb6606 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -18,10 +18,50 @@ #include <linux/of.h> #include <mach/map.h> +#include <mach/irqs.h> #include <plat/devs.h> -#include <plat/irqs.h> #include <plat/mfc.h> +static struct resource s5p_mfc_resource[] = { + [0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K), + [1] = DEFINE_RES_IRQ(IRQ_MFC), +}; + +struct platform_device s5p_device_mfc = { + .name = "s5p-mfc", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mfc_resource), + .resource = s5p_mfc_resource, +}; + +/* + * MFC hardware has 2 memory interfaces which are modelled as two separate + * platform devices to let dma-mapping distinguish between them. + * + * MFC parent device (s5p_device_mfc) must be registered before memory + * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). + */ + +struct platform_device s5p_device_mfc_l = { + .name = "s5p-mfc-l", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_device_mfc_l.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device s5p_device_mfc_r = { + .name = "s5p-mfc-r", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_device_mfc_r.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + struct s5p_mfc_reserved_mem { phys_addr_t base; unsigned long size; diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c index 103e371f5e35..ff1a76011b1e 100644 --- a/arch/arm/plat-samsung/s5p-irq.c +++ b/arch/arm/plat-samsung/s5p-irq.c @@ -15,6 +15,7 @@ #include <linux/io.h> #include <linux/irqchip/arm-vic.h> +#include <mach/irqs.h> #include <mach/map.h> #include <plat/regs-timer.h> #include <plat/cpu.h> |