Merge tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "This is mostly 32-bit code for SoC platforms, and looks smaller than
  any such branch I remember from previous kernels, as most of this is
  now handled in other subsystems for modern platforms:

   - Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
     Renesas, and Samsung

   - Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung

   - Samsung SoC driver updates to make them loadable modules"

* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: arm: samsung: include S3C headers in platform entry
  MAINTAINERS: Add linux-actions ML for Actions Semi Arch
  ARM: s3c: irq-s3c24xx: staticize local functions
  ARM: s3c: irq-s3c24xx: include headers for missing declarations
  ARM: s3c: fix fiq for clang IAS
  ARM: imx: Remove unused IMX_GPIO_NR() macro
  soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
  ARM: OMAP2+: fix spellint typo
  MAINTAINERS: Update address for OMAP GPMC driver
  soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
  ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
  ARM: brcmstb: Add debug UART entry for 72116
  ARM: tegra: Don't enable unused PLLs on resume from suspend
  soc: samsung: pm_domains: Convert to regular platform driver
  soc: samsung: exynos-chipid: correct helpers __init annotation
  ARM: mach-imx: imx6ul: Print SOC revision on boot
  ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
  soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
  soc: samsung: exynos-asv: handle reading revision register error
  soc: samsung: exynos-asv: don't defer early on not-supported SoCs

11 files changed, 140 insertions, 75 deletions

diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
index 0ff32ffc610c..f684e3a815f6 100644
--- a/arch/arm/include/debug/brcmstb.S
+++ b/arch/arm/include/debug/brcmstb.S
@@ -25,6 +25,7 @@
 #define SUN_TOP_CTRL_BASE_V7	REG_PHYS_ADDR_V7(0x404000)
 
 #define UARTA_3390		REG_PHYS_ADDR(0x40a900)
+#define UARTA_72116		UARTA_7255
 #define UARTA_7250		REG_PHYS_ADDR(0x40b400)
 #define UARTA_7255		REG_PHYS_ADDR(0x40c000)
 #define UARTA_7260		UARTA_7255
@@ -85,20 +86,21 @@ ARM_BE8(	rev	\rv, \rv )
 
 		/* Chip specific detection starts here */
 20:		checkuart(\rp, \rv, 0x33900000, 3390)
-21:		checkuart(\rp, \rv, 0x72160000, 7216)
-22:		checkuart(\rp, \rv, 0x07216400, 72164)
-23:		checkuart(\rp, \rv, 0x07216500, 72165)
-24:		checkuart(\rp, \rv, 0x72500000, 7250)
-25:		checkuart(\rp, \rv, 0x72550000, 7255)
-26:		checkuart(\rp, \rv, 0x72600000, 7260)
-27:		checkuart(\rp, \rv, 0x72680000, 7268)
-28:		checkuart(\rp, \rv, 0x72710000, 7271)
-29:		checkuart(\rp, \rv, 0x72780000, 7278)
-30:		checkuart(\rp, \rv, 0x73640000, 7364)
-31:		checkuart(\rp, \rv, 0x73660000, 7366)
-32:		checkuart(\rp, \rv, 0x07437100, 74371)
-33:		checkuart(\rp, \rv, 0x74390000, 7439)
-34:		checkuart(\rp, \rv, 0x74450000, 7445)
+21:		checkuart(\rp, \rv, 0x07211600, 72116)
+22:		checkuart(\rp, \rv, 0x72160000, 7216)
+23:		checkuart(\rp, \rv, 0x07216400, 72164)
+24:		checkuart(\rp, \rv, 0x07216500, 72165)
+25:		checkuart(\rp, \rv, 0x72500000, 7250)
+26:		checkuart(\rp, \rv, 0x72550000, 7255)
+27:		checkuart(\rp, \rv, 0x72600000, 7260)
+28:		checkuart(\rp, \rv, 0x72680000, 7268)
+29:		checkuart(\rp, \rv, 0x72710000, 7271)
+30:		checkuart(\rp, \rv, 0x72780000, 7278)
+31:		checkuart(\rp, \rv, 0x73640000, 7364)
+32:		checkuart(\rp, \rv, 0x73660000, 7366)
+33:		checkuart(\rp, \rv, 0x07437100, 74371)
+34:		checkuart(\rp, \rv, 0x74390000, 7439)
+35:		checkuart(\rp, \rv, 0x74450000, 7445)
 
 		/* No valid UART found */
 90:		mov	\rp, #0
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 9b594ae98153..2890e61b2b46 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -161,6 +161,7 @@ config ARCH_BCM2835
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select BCM2835_TIMER
+	select BRCMSTB_L2_IRQ
 	select PINCTRL
 	select PINCTRL_BCM2835
 	select MFD_CORE
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 56d272967fc0..5a48abac6af4 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -13,7 +13,6 @@ menuconfig ARCH_EXYNOS
 	select ARM_GIC
 	select EXYNOS_IRQ_COMBINER
 	select COMMON_CLK_SAMSUNG
-	select EXYNOS_ASV
 	select EXYNOS_CHIPID
 	select EXYNOS_THERMAL
 	select EXYNOS_PMU
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index 7acf7ce467ed..0760fff39a0b 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -106,8 +106,4 @@
 	.type = _type,							\
 }
 
-/* There's an off-by-one between the gpio bank number and the gpiochip */
-/* range e.g. GPIO_1_5 is gpio 5 under linux */
-#define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
-
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index e018e716735f..35e81201cb5d 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -14,6 +14,7 @@
 
 #include "common.h"
 #include "cpuidle.h"
+#include "hardware.h"
 
 static void __init imx6ul_enet_clk_init(void)
 {
@@ -27,34 +28,16 @@ static void __init imx6ul_enet_clk_init(void)
 		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
 }
 
-static int ksz8081_phy_fixup(struct phy_device *dev)
-{
-	if (dev && dev->interface == PHY_INTERFACE_MODE_MII) {
-		phy_write(dev, 0x1f, 0x8110);
-		phy_write(dev, 0x16, 0x201);
-	} else if (dev && dev->interface == PHY_INTERFACE_MODE_RMII) {
-		phy_write(dev, 0x1f, 0x8190);
-		phy_write(dev, 0x16, 0x202);
-	}
-
-	return 0;
-}
-
-static void __init imx6ul_enet_phy_init(void)
-{
-	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK,
-					   ksz8081_phy_fixup);
-}
-
 static inline void imx6ul_enet_init(void)
 {
 	imx6ul_enet_clk_init();
-	imx6ul_enet_phy_init();
 }
 
 static void __init imx6ul_init_machine(void)
 {
+	imx_print_silicon_rev(cpu_is_imx6ull() ? "i.MX6ULL" : "i.MX6UL",
+		imx_get_soc_revision());
+
 	of_platform_default_populate(NULL, NULL, NULL);
 	imx6ul_enet_init();
 	imx_anatop_init();
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index dedd47e30b98..1feb0098705e 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -1299,7 +1299,7 @@ int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh)
  * Due to a suspend or hibernation operation, the state of the registers
  * controlling this clkdm will be lost, save their context.
  */
-static int _clkdm_save_context(struct clockdomain *clkdm, void *ununsed)
+static int _clkdm_save_context(struct clockdomain *clkdm, void *unused)
 {
 	if (!arch_clkdm || !arch_clkdm->clkdm_save_context)
 		return -EINVAL;
@@ -1312,7 +1312,7 @@ static int _clkdm_save_context(struct clockdomain *clkdm, void *ununsed)
  *
  * Restore the register values for this clockdomain.
  */
-static int _clkdm_restore_context(struct clockdomain *clkdm, void *ununsed)
+static int _clkdm_restore_context(struct clockdomain *clkdm, void *unused)
 {
 	if (!arch_clkdm || !arch_clkdm->clkdm_restore_context)
 		return -EINVAL;
diff --git a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
index b54cbd012241..5d238d9a798e 100644
--- a/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
+++ b/arch/arm/mach-s3c/irq-s3c24xx-fiq.S
@@ -35,7 +35,6 @@
 	@ and an offset to the irq acknowledgment word
 
 ENTRY(s3c24xx_spi_fiq_rx)
-s3c24xx_spi_fix_rx:
 	.word	fiq_rx_end - fiq_rx_start
 	.word	fiq_rx_irq_ack - fiq_rx_start
 fiq_rx_start:
@@ -49,7 +48,7 @@ fiq_rx_start:
 	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
 
 	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
+	subsne	pc, lr, #4		@@ return, still have work to do
 
 	@@ set IRQ controller so that next op will trigger IRQ
 	mov	fiq_rtmp, #0
@@ -61,7 +60,6 @@ fiq_rx_irq_ack:
 fiq_rx_end:
 
 ENTRY(s3c24xx_spi_fiq_txrx)
-s3c24xx_spi_fiq_txrx:
 	.word	fiq_txrx_end - fiq_txrx_start
 	.word	fiq_txrx_irq_ack - fiq_txrx_start
 fiq_txrx_start:
@@ -76,7 +74,7 @@ fiq_txrx_start:
 	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
 
 	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
+	subsne	pc, lr, #4		@@ return, still have work to do
 
 	mov	fiq_rtmp, #0
 	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
@@ -88,7 +86,6 @@ fiq_txrx_irq_ack:
 fiq_txrx_end:
 
 ENTRY(s3c24xx_spi_fiq_tx)
-s3c24xx_spi_fix_tx:
 	.word	fiq_tx_end - fiq_tx_start
 	.word	fiq_tx_irq_ack - fiq_tx_start
 fiq_tx_start:
@@ -101,7 +98,7 @@ fiq_tx_start:
 	strb	fiq_rtmp, [ fiq_rspi, # S3C2410_SPTDAT ]
 
 	subs	fiq_rcount, fiq_rcount, #1
-	subnes	pc, lr, #4		@@ return, still have work to do
+	subsne	pc, lr, #4		@@ return, still have work to do
 
 	mov	fiq_rtmp, #0
 	str	fiq_rtmp, [ fiq_rirq, # S3C2410_INTMOD  - S3C24XX_VA_IRQ ]
diff --git a/arch/arm/mach-s3c/irq-s3c24xx.c b/arch/arm/mach-s3c/irq-s3c24xx.c
index 79b5f19af7a5..0c631c14a817 100644
--- a/arch/arm/mach-s3c/irq-s3c24xx.c
+++ b/arch/arm/mach-s3c/irq-s3c24xx.c
@@ -21,6 +21,7 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
+#include <linux/spi/s3c24xx.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
@@ -32,6 +33,7 @@
 #include "cpu.h"
 #include "regs-irqtype.h"
 #include "pm.h"
+#include "s3c24xx.h"
 
 #define S3C_IRQTYPE_NONE	0
 #define S3C_IRQTYPE_EINT	1
@@ -357,7 +359,7 @@ static inline int s3c24xx_handle_intc(struct s3c_irq_intc *intc,
 	return true;
 }
 
-asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
+static asmlinkage void __exception_irq_entry s3c24xx_handle_irq(struct pt_regs *regs)
 {
 	do {
 		if (likely(s3c_intc[0]))
@@ -1305,7 +1307,7 @@ static struct s3c24xx_irq_of_ctrl s3c2410_ctrl[] = {
 	}
 };
 
-int __init s3c2410_init_intc_of(struct device_node *np,
+static int __init s3c2410_init_intc_of(struct device_node *np,
 			struct device_node *interrupt_parent)
 {
 	return s3c_init_intc_of(np, interrupt_parent,
@@ -1327,7 +1329,7 @@ static struct s3c24xx_irq_of_ctrl s3c2416_ctrl[] = {
 	}
 };
 
-int __init s3c2416_init_intc_of(struct device_node *np,
+static int __init s3c2416_init_intc_of(struct device_node *np,
 			struct device_node *interrupt_parent)
 {
 	return s3c_init_intc_of(np, interrupt_parent,
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 0e00ba8cf646..a5a36cce142a 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -43,11 +43,34 @@
 #define APB_MISC_XM2CFGCPADCTRL2	0x8e4
 #define APB_MISC_XM2CFGDPADCTRL2	0x8e8
 
-.macro pll_enable, rd, r_car_base, pll_base
+#define PLLC_STORE_MASK			(1 << 0)
+#define PLLM_STORE_MASK			(1 << 1)
+#define PLLP_STORE_MASK			(1 << 2)
+
+.macro test_pll_state, rd, test_mask
+	ldr	\rd, tegra_pll_state
+	tst	\rd, #\test_mask
+.endm
+
+.macro store_pll_state, rd, tmp, r_car_base, pll_base, pll_mask
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	ldr	\rd, tegra_pll_state
+	biceq	\rd, \rd, #\pll_mask
+	orrne	\rd, \rd, #\pll_mask
+	adr	\tmp, tegra_pll_state
+	str	\rd, [\tmp]
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, test_mask
+	test_pll_state \rd, \test_mask
+	beq	1f
+
 	ldr	\rd, [\r_car_base, #\pll_base]
 	tst	\rd, #(1 << 30)
 	orreq	\rd, \rd, #(1 << 30)
 	streq	\rd, [\r_car_base, #\pll_base]
+1:
 .endm
 
 .macro emc_device_mask, rd, base
@@ -177,9 +200,9 @@ ENTRY(tegra20_lp1_reset)
 	str	r1, [r0, #CLK_RESET_CCLK_DIVIDER]
 	str	r1, [r0, #CLK_RESET_SCLK_DIVIDER]
 
-	pll_enable r1, r0, CLK_RESET_PLLM_BASE
-	pll_enable r1, r0, CLK_RESET_PLLP_BASE
-	pll_enable r1, r0, CLK_RESET_PLLC_BASE
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
 
 	adr	r2, tegra20_sdram_pad_address
 	adr	r4, tegra20_sdram_pad_save
@@ -270,6 +293,10 @@ tegra20_switch_cpu_to_clk32k:
 	add	r1, r1, #2
 	wait_until r1, r7, r9
 
+	store_pll_state r0, r1, r5, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+
 	/* disable PLLM, PLLP and PLLC */
 	ldr	r0, [r5, #CLK_RESET_PLLM_BASE]
 	bic	r0, r0, #(1 << 30)
@@ -396,6 +423,9 @@ tegra20_sdram_pad_save:
 	.long	0
 	.endr
 
+tegra_pll_state:
+	.word	0x0
+
 	.ltorg
 /* dummy symbol for end of IRAM */
 	.align L1_CACHE_SHIFT
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 2667bcdb5dc6..0cc40b6b2ba3 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -71,6 +71,13 @@
 
 #define TEGRA30_POWER_HOTPLUG_SHUTDOWN	(1 << 27) /* Hotplug shutdown */
 
+#define PLLA_STORE_MASK			(1 << 0)
+#define PLLC_STORE_MASK			(1 << 1)
+#define PLLM_STORE_MASK			(1 << 2)
+#define PLLP_STORE_MASK			(1 << 3)
+#define PLLX_STORE_MASK			(1 << 4)
+#define PLLM_PMC_STORE_MASK		(1 << 5)
+
 .macro emc_device_mask, rd, base
 	ldr	\rd, [\base, #EMC_ADR_CFG]
 	tst	\rd, #0x1
@@ -87,7 +94,43 @@
 	bne	1001b
 .endm
 
-.macro pll_enable, rd, r_car_base, pll_base, pll_misc
+.macro test_pll_state, rd, test_mask
+	ldr	\rd, tegra_pll_state
+	tst	\rd, #\test_mask
+.endm
+
+.macro store_pll_state, rd, tmp, r_car_base, pll_base, pll_mask
+	ldr	\rd, [\r_car_base, #\pll_base]
+	tst	\rd, #(1 << 30)
+	ldr	\rd, tegra_pll_state
+	biceq	\rd, \rd, #\pll_mask
+	orrne	\rd, \rd, #\pll_mask
+	adr	\tmp, tegra_pll_state
+	str	\rd, [\tmp]
+.endm
+
+.macro store_pllm_pmc_state, rd, tmp, pmc_base
+	ldr	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+	tst	\rd, #(1 << 12)
+	ldr	\rd, tegra_pll_state
+	biceq	\rd, \rd, #PLLM_PMC_STORE_MASK
+	orrne	\rd, \rd, #PLLM_PMC_STORE_MASK
+	adr	\tmp, tegra_pll_state
+	str	\rd, [\tmp]
+.endm
+
+.macro pllm_pmc_enable, rd, pmc_base
+	test_pll_state \rd, PLLM_PMC_STORE_MASK
+
+	ldrne	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+	orrne	\rd, \rd, #(1 << 12)
+	strne	\rd, [\pmc_base, #PMC_PLLP_WB0_OVERRIDE]
+.endm
+
+.macro pll_enable, rd, r_car_base, pll_base, pll_misc, test_mask
+	test_pll_state \rd, \test_mask
+	beq	1f
+
 	ldr	\rd, [\r_car_base, #\pll_base]
 	tst	\rd, #(1 << 30)
 	orreq	\rd, \rd, #(1 << 30)
@@ -102,13 +145,17 @@
 	orr	\rd, \rd, #(1 << 18)
 	str	\rd, [\r_car_base, #\pll_misc]
 	.endif
+1:
 .endm
 
-.macro pll_locked, rd, r_car_base, pll_base
+.macro pll_locked, rd, r_car_base, pll_base, test_mask
+	test_pll_state \rd, \test_mask
+	beq	2f
 1:
 	ldr	\rd, [\r_car_base, #\pll_base]
 	tst	\rd, #(1 << 27)
 	beq	1b
+2:
 .endm
 
 .macro pll_iddq_exit, rd, car, iddq, iddq_bit
@@ -342,34 +389,30 @@ ENTRY(tegra30_lp1_reset)
 
 	/* enable PLLM via PMC */
 	mov32	r2, TEGRA_PMC_BASE
-	ldr	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
-	orr	r1, r1, #(1 << 12)
-	str	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+	pllm_pmc_enable r1, r2
 
-	pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0
-	pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0
-	pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, 0, PLLM_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, 0, PLLC_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLX_BASE, 0, PLLX_STORE_MASK
 
 	b	_pll_m_c_x_done
 
 _no_pll_iddq_exit:
 	/* enable PLLM via PMC */
 	mov32	r2, TEGRA_PMC_BASE
-	ldr	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
-	orr	r1, r1, #(1 << 12)
-	str	r1, [r2, #PMC_PLLP_WB0_OVERRIDE]
+	pllm_pmc_enable r1, r2
 
-	pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC
-	pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC
+	pll_enable r1, r0, CLK_RESET_PLLM_BASE, CLK_RESET_PLLM_MISC, PLLM_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLC_BASE, CLK_RESET_PLLC_MISC, PLLC_STORE_MASK
 
 _pll_m_c_x_done:
-	pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC
-	pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC
+	pll_enable r1, r0, CLK_RESET_PLLP_BASE, CLK_RESET_PLLP_MISC, PLLP_STORE_MASK
+	pll_enable r1, r0, CLK_RESET_PLLA_BASE, CLK_RESET_PLLA_MISC, PLLA_STORE_MASK
 
-	pll_locked r1, r0, CLK_RESET_PLLM_BASE
-	pll_locked r1, r0, CLK_RESET_PLLP_BASE
-	pll_locked r1, r0, CLK_RESET_PLLA_BASE
-	pll_locked r1, r0, CLK_RESET_PLLC_BASE
+	pll_locked r1, r0, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK
+	pll_locked r1, r0, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
 
 	/*
 	 * CPUFreq driver could select other PLL for CPU. PLLX will be
@@ -380,7 +423,7 @@ _pll_m_c_x_done:
 	cmp	r1, #TEGRA30
 	beq	1f
 
-	pll_locked r1, r0, CLK_RESET_PLLX_BASE
+	pll_locked r1, r0, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK
 
 	ldr	r1, [r0, #CLK_RESET_PLLP_BASE]
 	bic	r1, r1, #(1<<31)	@ disable PllP bypass
@@ -593,6 +636,9 @@ tegra_sdram_pad_save:
 	.long	0
 	.endr
 
+tegra_pll_state:
+	.word	0x0
+
 /*
  * tegra30_tear_down_core
  *
@@ -641,6 +687,14 @@ tegra30_switch_cpu_to_clk32k:
 	add	r1, r1, #2
 	wait_until r1, r7, r9
 
+	/* store enable-state of PLLs */
+	store_pll_state r0, r1, r5, CLK_RESET_PLLA_BASE, PLLA_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLC_BASE, PLLC_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLM_BASE, PLLM_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLP_BASE, PLLP_STORE_MASK
+	store_pll_state r0, r1, r5, CLK_RESET_PLLX_BASE, PLLX_STORE_MASK
+	store_pllm_pmc_state r0, r1, r4
+
 	/* disable PLLM via PMC in LP1 */
 	ldr	r0, [r4, #PMC_PLLP_WB0_OVERRIDE]
 	bic	r0, r0, #(1 << 12)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index ec3c0cb27d1e..88fdf6fc7569 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -39,6 +39,7 @@ config ARCH_BCM2835
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
+	select BRCMSTB_L2_IRQ
 	help
 	  This enables support for the Broadcom BCM2837 and BCM2711 SoC.
 	  These SoCs are used in the Raspberry Pi 3 and 4 devices.