Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:

 - massive CPU hotplug rework (Thomas Gleixner)

 - improve migration fairness (Peter Zijlstra)

 - CPU load calculation updates/cleanups (Yuyang Du)

 - cpufreq updates (Steve Muckle)

 - nohz optimizations (Frederic Weisbecker)

 - switch_mm() micro-optimization on x86 (Andy Lutomirski)

 - ... lots of other enhancements, fixes and cleanups.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
  ARM: Hide finish_arch_post_lock_switch() from modules
  sched/core: Provide a tsk_nr_cpus_allowed() helper
  sched/core: Use tsk_cpus_allowed() instead of accessing ->cpus_allowed
  sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems
  sched/fair: Correct unit of load_above_capacity
  sched/fair: Clean up scale confusion
  sched/nohz: Fix affine unpinned timers mess
  sched/fair: Fix fairness issue on migration
  sched/core: Kill sched_class::task_waking to clean up the migration logic
  sched/fair: Prepare to fix fairness problems on migration
  sched/fair: Move record_wakee()
  sched/core: Fix comment typo in wake_q_add()
  sched/core: Remove unused variable
  sched: Make hrtick_notifier an explicit call
  sched/fair: Make ilb_notifier an explicit call
  sched/hotplug: Make activate() the last hotplug step
  sched/hotplug: Move migration CPU_DYING to sched_cpu_dying()
  sched/migration: Move CPU_ONLINE into scheduler state
  sched/migration: Move calc_load_migrate() into CPU_DYING
  sched/migration: Move prepare transition to SCHED_STARTING state
  ...

2 files changed, 117 insertions, 2 deletions

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index f98913258c63..62c0043a5fd5 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -2,7 +2,7 @@
 KCOV_INSTRUMENT_tlb.o	:= n
 
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o physaddr.o gup.o setup_nx.o
+	    pat.o pgtable.o physaddr.o gup.o setup_nx.o tlb.o
 
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
@@ -12,7 +12,6 @@ CFLAGS_setup_nx.o		:= $(nostackp)
 CFLAGS_fault.o := -I$(src)/../include/asm/trace
 
 obj-$(CONFIG_X86_PAT)		+= pat_rbtree.o
-obj-$(CONFIG_SMP)		+= tlb.o
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
 
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index fe9b9f776361..5643fd0b1a7d 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -28,6 +28,8 @@
  *	Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
  */
 
+#ifdef CONFIG_SMP
+
 struct flush_tlb_info {
 	struct mm_struct *flush_mm;
 	unsigned long flush_start;
@@ -57,6 +59,118 @@ void leave_mm(int cpu)
 }
 EXPORT_SYMBOL_GPL(leave_mm);
 
+#endif /* CONFIG_SMP */
+
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	       struct task_struct *tsk)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm_irqs_off(prev, next, tsk);
+	local_irq_restore(flags);
+}
+
+void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
+			struct task_struct *tsk)
+{
+	unsigned cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+#ifdef CONFIG_SMP
+		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		this_cpu_write(cpu_tlbstate.active_mm, next);
+#endif
+		cpumask_set_cpu(cpu, mm_cpumask(next));
+
+		/*
+		 * Re-load page tables.
+		 *
+		 * This logic has an ordering constraint:
+		 *
+		 *  CPU 0: Write to a PTE for 'next'
+		 *  CPU 0: load bit 1 in mm_cpumask.  if nonzero, send IPI.
+		 *  CPU 1: set bit 1 in next's mm_cpumask
+		 *  CPU 1: load from the PTE that CPU 0 writes (implicit)
+		 *
+		 * We need to prevent an outcome in which CPU 1 observes
+		 * the new PTE value and CPU 0 observes bit 1 clear in
+		 * mm_cpumask.  (If that occurs, then the IPI will never
+		 * be sent, and CPU 0's TLB will contain a stale entry.)
+		 *
+		 * The bad outcome can occur if either CPU's load is
+		 * reordered before that CPU's store, so both CPUs must
+		 * execute full barriers to prevent this from happening.
+		 *
+		 * Thus, switch_mm needs a full barrier between the
+		 * store to mm_cpumask and any operation that could load
+		 * from next->pgd.  TLB fills are special and can happen
+		 * due to instruction fetches or for no reason at all,
+		 * and neither LOCK nor MFENCE orders them.
+		 * Fortunately, load_cr3() is serializing and gives the
+		 * ordering guarantee we need.
+		 *
+		 */
+		load_cr3(next->pgd);
+
+		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+
+		/* Stop flush ipis for the previous mm */
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
+
+		/* Load per-mm CR4 state */
+		load_mm_cr4(next);
+
+#ifdef CONFIG_MODIFY_LDT_SYSCALL
+		/*
+		 * Load the LDT, if the LDT is different.
+		 *
+		 * It's possible that prev->context.ldt doesn't match
+		 * the LDT register.  This can happen if leave_mm(prev)
+		 * was called and then modify_ldt changed
+		 * prev->context.ldt but suppressed an IPI to this CPU.
+		 * In this case, prev->context.ldt != NULL, because we
+		 * never set context.ldt to NULL while the mm still
+		 * exists.  That means that next->context.ldt !=
+		 * prev->context.ldt, because mms never share an LDT.
+		 */
+		if (unlikely(prev->context.ldt != next->context.ldt))
+			load_mm_ldt(next);
+#endif
+	}
+#ifdef CONFIG_SMP
+	  else {
+		this_cpu_write(cpu_tlbstate.state, TLBSTATE_OK);
+		BUG_ON(this_cpu_read(cpu_tlbstate.active_mm) != next);
+
+		if (!cpumask_test_cpu(cpu, mm_cpumask(next))) {
+			/*
+			 * On established mms, the mm_cpumask is only changed
+			 * from irq context, from ptep_clear_flush() while in
+			 * lazy tlb mode, and here. Irqs are blocked during
+			 * schedule, protecting us from simultaneous changes.
+			 */
+			cpumask_set_cpu(cpu, mm_cpumask(next));
+
+			/*
+			 * We were in lazy tlb mode and leave_mm disabled
+			 * tlb flush IPI delivery. We must reload CR3
+			 * to make sure to use no freed page tables.
+			 *
+			 * As above, load_cr3() is serializing and orders TLB
+			 * fills with respect to the mm_cpumask write.
+			 */
+			load_cr3(next->pgd);
+			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
+			load_mm_cr4(next);
+			load_mm_ldt(next);
+		}
+	}
+#endif
+}
+
+#ifdef CONFIG_SMP
+
 /*
  * The flush IPI assumes that a thread switch happens in this order:
  * [cpu0: the cpu that switches]
@@ -353,3 +467,5 @@ static int __init create_tlb_single_page_flush_ceiling(void)
 	return 0;
 }
 late_initcall(create_tlb_single_page_flush_ceiling);
+
+#endif /* CONFIG_SMP */