MCA: delete all remaining traces of microchannel bus support.

Hardware with MCA bus is limited to 386 and 486 class machines
that are now 20+ years old and typically with less than 32MB
of memory.  A quick search on the internet, and you see that
even the MCA hobbyist/enthusiast community has lost interest
in the early 2000 era and never really even moved ahead from
the 2.4 kernels to the 2.6 series.

This deletes anything remaining related to CONFIG_MCA from core
kernel code and from the x86 architecture.  There is no point in
carrying this any further into the future.

One complication to watch for is inadvertently scooping up
stuff relating to machine check, since there is overlap in
the TLA name space (e.g. arch/x86/boot/mca.c).

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

4 files changed, 2 insertions, 247 deletions

diff --git a/arch/x86/include/asm/mca.h b/arch/x86/include/asm/mca.h
deleted file mode 100644
index eedbb6cc1efb..000000000000
--- a/arch/x86/include/asm/mca.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* -*- mode: c; c-basic-offset: 8 -*- */
-
-/* Platform specific MCA defines */
-#ifndef _ASM_X86_MCA_H
-#define _ASM_X86_MCA_H
-
-/* Maximal number of MCA slots - actually, some machines have less, but
- * they all have sufficient number of POS registers to cover 8.
- */
-#define MCA_MAX_SLOT_NR  8
-
-/* Most machines have only one MCA bus.  The only multiple bus machines
- * I know have at most two */
-#define MAX_MCA_BUSSES 2
-
-#define MCA_PRIMARY_BUS		0
-#define MCA_SECONDARY_BUS	1
-
-/* Dummy slot numbers on primary MCA for integrated functions */
-#define MCA_INTEGSCSI	(MCA_MAX_SLOT_NR)
-#define MCA_INTEGVIDEO	(MCA_MAX_SLOT_NR+1)
-#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
-
-/* Dummy POS values for integrated functions */
-#define MCA_DUMMY_POS_START	0x10000
-#define MCA_INTEGSCSI_POS	(MCA_DUMMY_POS_START+1)
-#define MCA_INTEGVIDEO_POS	(MCA_DUMMY_POS_START+2)
-#define MCA_MOTHERBOARD_POS	(MCA_DUMMY_POS_START+3)
-
-/* MCA registers */
-
-#define MCA_MOTHERBOARD_SETUP_REG	0x94
-#define MCA_ADAPTER_SETUP_REG		0x96
-#define MCA_POS_REG(n)			(0x100+(n))
-
-#define MCA_ENABLED	0x01	/* POS 2, set if adapter enabled */
-
-/* Max number of adapters, including both slots and various integrated
- * things.
- */
-#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
-
-#endif /* _ASM_X86_MCA_H */
diff --git a/arch/x86/include/asm/mca_dma.h b/arch/x86/include/asm/mca_dma.h
deleted file mode 100644
index 45271aef82dd..000000000000
--- a/arch/x86/include/asm/mca_dma.h
+++ /dev/null
@@ -1,201 +0,0 @@
-#ifndef _ASM_X86_MCA_DMA_H
-#define _ASM_X86_MCA_DMA_H
-
-#include <asm/io.h>
-#include <linux/ioport.h>
-
-/*
- * Microchannel specific DMA stuff.  DMA on an MCA machine is fairly similar to
- *   standard PC dma, but it certainly has its quirks.  DMA register addresses
- *   are in a different place and there are some added functions.  Most of this
- *   should be pretty obvious on inspection.  Note that the user must divide
- *   count by 2 when using 16-bit dma; that is not handled by these functions.
- *
- * Ramen Noodles are yummy.
- *
- *  1998 Tymm Twillman <tymm@computer.org>
- */
-
-/*
- * Registers that are used by the DMA controller; FN is the function register
- *   (tell the controller what to do) and EXE is the execution register (how
- *   to do it)
- */
-
-#define MCA_DMA_REG_FN  0x18
-#define MCA_DMA_REG_EXE 0x1A
-
-/*
- * Functions that the DMA controller can do
- */
-
-#define MCA_DMA_FN_SET_IO       0x00
-#define MCA_DMA_FN_SET_ADDR     0x20
-#define MCA_DMA_FN_GET_ADDR     0x30
-#define MCA_DMA_FN_SET_COUNT    0x40
-#define MCA_DMA_FN_GET_COUNT    0x50
-#define MCA_DMA_FN_GET_STATUS   0x60
-#define MCA_DMA_FN_SET_MODE     0x70
-#define MCA_DMA_FN_SET_ARBUS    0x80
-#define MCA_DMA_FN_MASK         0x90
-#define MCA_DMA_FN_RESET_MASK   0xA0
-#define MCA_DMA_FN_MASTER_CLEAR 0xD0
-
-/*
- * Modes (used by setting MCA_DMA_FN_MODE in the function register)
- *
- * Note that the MODE_READ is read from memory (write to device), and
- *   MODE_WRITE is vice-versa.
- */
-
-#define MCA_DMA_MODE_XFER  0x04  /* read by default */
-#define MCA_DMA_MODE_READ  0x04  /* same as XFER */
-#define MCA_DMA_MODE_WRITE 0x08  /* OR with MODE_XFER to use */
-#define MCA_DMA_MODE_IO    0x01  /* DMA from IO register */
-#define MCA_DMA_MODE_16    0x40  /* 16 bit xfers */
-
-
-/**
- *	mca_enable_dma	-	channel to enable DMA on
- *	@dmanr: DMA channel
- *
- *	Enable the MCA bus DMA on a channel. This can be called from
- *	IRQ context.
- */
-
-static inline void mca_enable_dma(unsigned int dmanr)
-{
-	outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
-}
-
-/**
- *	mca_disble_dma	-	channel to disable DMA on
- *	@dmanr: DMA channel
- *
- *	Enable the MCA bus DMA on a channel. This can be called from
- *	IRQ context.
- */
-
-static inline void mca_disable_dma(unsigned int dmanr)
-{
-	outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
-}
-
-/**
- *	mca_set_dma_addr -	load a 24bit DMA address
- *	@dmanr: DMA channel
- *	@a: 24bit bus address
- *
- *	Load the address register in the DMA controller. This has a 24bit
- *	limitation (16Mb).
- */
-
-static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
-	outb(a & 0xff, MCA_DMA_REG_EXE);
-	outb((a >> 8) & 0xff, MCA_DMA_REG_EXE);
-	outb((a >> 16) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- *	mca_get_dma_addr -	load a 24bit DMA address
- *	@dmanr: DMA channel
- *
- *	Read the address register in the DMA controller. This has a 24bit
- *	limitation (16Mb). The return is a bus address.
- */
-
-static inline unsigned int mca_get_dma_addr(unsigned int dmanr)
-{
-	unsigned int addr;
-
-	outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
-	addr = inb(MCA_DMA_REG_EXE);
-	addr |= inb(MCA_DMA_REG_EXE) << 8;
-	addr |= inb(MCA_DMA_REG_EXE) << 16;
-
-	return addr;
-}
-
-/**
- *	mca_set_dma_count -	load a 16bit transfer count
- *	@dmanr: DMA channel
- *	@count: count
- *
- *	Set the DMA count for this channel. This can be up to 64Kbytes.
- *	Setting a count of zero will not do what you expect.
- */
-
-static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	count--;  /* transfers one more than count -- correct for this */
-
-	outb(MCA_DMA_FN_SET_COUNT | dmanr, MCA_DMA_REG_FN);
-	outb(count & 0xff, MCA_DMA_REG_EXE);
-	outb((count >> 8) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- *	mca_get_dma_residue -	get the remaining bytes to transfer
- *	@dmanr: DMA channel
- *
- *	This function returns the number of bytes left to transfer
- *	on this DMA channel.
- */
-
-static inline unsigned int mca_get_dma_residue(unsigned int dmanr)
-{
-	unsigned short count;
-
-	outb(MCA_DMA_FN_GET_COUNT | dmanr, MCA_DMA_REG_FN);
-	count = 1 + inb(MCA_DMA_REG_EXE);
-	count += inb(MCA_DMA_REG_EXE) << 8;
-
-	return count;
-}
-
-/**
- *	mca_set_dma_io -	set the port for an I/O transfer
- *	@dmanr: DMA channel
- *	@io_addr: an I/O port number
- *
- *	Unlike the ISA bus DMA controllers the DMA on MCA bus can transfer
- *	with an I/O port target.
- */
-
-static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
-{
-	/*
-	 * DMA from a port address -- set the io address
-	 */
-
-	outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
-	outb(io_addr & 0xff, MCA_DMA_REG_EXE);
-	outb((io_addr >>  8) & 0xff, MCA_DMA_REG_EXE);
-}
-
-/**
- *	mca_set_dma_mode -	set the DMA mode
- *	@dmanr: DMA channel
- *	@mode: mode to set
- *
- *	The DMA controller supports several modes. The mode values you can
- *	set are-
- *
- *	%MCA_DMA_MODE_READ when reading from the DMA device.
- *
- *	%MCA_DMA_MODE_WRITE to writing to the DMA device.
- *
- *	%MCA_DMA_MODE_IO to do DMA to or from an I/O port.
- *
- *	%MCA_DMA_MODE_16 to do 16bit transfers.
- */
-
-static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
-	outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
-	outb(mode, MCA_DMA_REG_EXE);
-}
-
-#endif /* _ASM_X86_MCA_DMA_H */
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 9c7d95f6174b..3e2f42a4b872 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -40,7 +40,7 @@ extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 
 #endif /* CONFIG_X86_64 */
 
-#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
+#ifdef CONFIG_EISA
 extern int mp_bus_id_to_type[MAX_MP_BUSSES];
 #endif
 
diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h
index c0a955a9a087..b31f8c098271 100644
--- a/arch/x86/include/asm/mpspec_def.h
+++ b/arch/x86/include/asm/mpspec_def.h
@@ -84,7 +84,7 @@ struct mpc_bus {
 #define BUSTYPE_EISA	"EISA"
 #define BUSTYPE_ISA	"ISA"
 #define BUSTYPE_INTERN	"INTERN"	/* Internal BUS */
-#define BUSTYPE_MCA	"MCA"
+#define BUSTYPE_MCA	"MCA"		/* Obsolete */
 #define BUSTYPE_VL	"VL"		/* Local bus */
 #define BUSTYPE_PCI	"PCI"
 #define BUSTYPE_PCMCIA	"PCMCIA"
@@ -169,6 +169,5 @@ enum mp_bustype {
 	MP_BUS_ISA = 1,
 	MP_BUS_EISA,
 	MP_BUS_PCI,
-	MP_BUS_MCA,
 };
 #endif /* _ASM_X86_MPSPEC_DEF_H */