Merge branch 'linus' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

3 files changed, 145 insertions, 16 deletions

diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c
index 7d2d7c801dba..0ecfac84ba91 100644
--- a/arch/x86/events/amd/core.c
+++ b/arch/x86/events/amd/core.c
@@ -3,10 +3,14 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <asm/apicdef.h>
+#include <asm/nmi.h>
 
 #include "../perf_event.h"
 
+static DEFINE_PER_CPU(unsigned int, perf_nmi_counter);
+
 static __initconst const u64 amd_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
@@ -429,6 +433,132 @@ static void amd_pmu_cpu_dead(int cpu)
 	}
 }
 
+/*
+ * When a PMC counter overflows, an NMI is used to process the event and
+ * reset the counter. NMI latency can result in the counter being updated
+ * before the NMI can run, which can result in what appear to be spurious
+ * NMIs. This function is intended to wait for the NMI to run and reset
+ * the counter to avoid possible unhandled NMI messages.
+ */
+#define OVERFLOW_WAIT_COUNT	50
+
+static void amd_pmu_wait_on_overflow(int idx)
+{
+	unsigned int i;
+	u64 counter;
+
+	/*
+	 * Wait for the counter to be reset if it has overflowed. This loop
+	 * should exit very, very quickly, but just in case, don't wait
+	 * forever...
+	 */
+	for (i = 0; i < OVERFLOW_WAIT_COUNT; i++) {
+		rdmsrl(x86_pmu_event_addr(idx), counter);
+		if (counter & (1ULL << (x86_pmu.cntval_bits - 1)))
+			break;
+
+		/* Might be in IRQ context, so can't sleep */
+		udelay(1);
+	}
+}
+
+static void amd_pmu_disable_all(void)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	int idx;
+
+	x86_pmu_disable_all();
+
+	/*
+	 * This shouldn't be called from NMI context, but add a safeguard here
+	 * to return, since if we're in NMI context we can't wait for an NMI
+	 * to reset an overflowed counter value.
+	 */
+	if (in_nmi())
+		return;
+
+	/*
+	 * Check each counter for overflow and wait for it to be reset by the
+	 * NMI if it has overflowed. This relies on the fact that all active
+	 * counters are always enabled when this function is caled and
+	 * ARCH_PERFMON_EVENTSEL_INT is always set.
+	 */
+	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		amd_pmu_wait_on_overflow(idx);
+	}
+}
+
+static void amd_pmu_disable_event(struct perf_event *event)
+{
+	x86_pmu_disable_event(event);
+
+	/*
+	 * This can be called from NMI context (via x86_pmu_stop). The counter
+	 * may have overflowed, but either way, we'll never see it get reset
+	 * by the NMI if we're already in the NMI. And the NMI latency support
+	 * below will take care of any pending NMI that might have been
+	 * generated by the overflow.
+	 */
+	if (in_nmi())
+		return;
+
+	amd_pmu_wait_on_overflow(event->hw.idx);
+}
+
+/*
+ * Because of NMI latency, if multiple PMC counters are active or other sources
+ * of NMIs are received, the perf NMI handler can handle one or more overflowed
+ * PMC counters outside of the NMI associated with the PMC overflow. If the NMI
+ * doesn't arrive at the LAPIC in time to become a pending NMI, then the kernel
+ * back-to-back NMI support won't be active. This PMC handler needs to take into
+ * account that this can occur, otherwise this could result in unknown NMI
+ * messages being issued. Examples of this is PMC overflow while in the NMI
+ * handler when multiple PMCs are active or PMC overflow while handling some
+ * other source of an NMI.
+ *
+ * Attempt to mitigate this by using the number of active PMCs to determine
+ * whether to return NMI_HANDLED if the perf NMI handler did not handle/reset
+ * any PMCs. The per-CPU perf_nmi_counter variable is set to a minimum of the
+ * number of active PMCs or 2. The value of 2 is used in case an NMI does not
+ * arrive at the LAPIC in time to be collapsed into an already pending NMI.
+ */
+static int amd_pmu_handle_irq(struct pt_regs *regs)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	int active, handled;
+
+	/*
+	 * Obtain the active count before calling x86_pmu_handle_irq() since
+	 * it is possible that x86_pmu_handle_irq() may make a counter
+	 * inactive (through x86_pmu_stop).
+	 */
+	active = __bitmap_weight(cpuc->active_mask, X86_PMC_IDX_MAX);
+
+	/* Process any counter overflows */
+	handled = x86_pmu_handle_irq(regs);
+
+	/*
+	 * If a counter was handled, record the number of possible remaining
+	 * NMIs that can occur.
+	 */
+	if (handled) {
+		this_cpu_write(perf_nmi_counter,
+			       min_t(unsigned int, 2, active));
+
+		return handled;
+	}
+
+	if (!this_cpu_read(perf_nmi_counter))
+		return NMI_DONE;
+
+	this_cpu_dec(perf_nmi_counter);
+
+	return NMI_HANDLED;
+}
+
 static struct event_constraint *
 amd_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
 			  struct perf_event *event)
@@ -621,11 +751,11 @@ static ssize_t amd_event_sysfs_show(char *page, u64 config)
 
 static __initconst const struct x86_pmu amd_pmu = {
 	.name			= "AMD",
-	.handle_irq		= x86_pmu_handle_irq,
-	.disable_all		= x86_pmu_disable_all,
+	.handle_irq		= amd_pmu_handle_irq,
+	.disable_all		= amd_pmu_disable_all,
 	.enable_all		= x86_pmu_enable_all,
 	.enable			= x86_pmu_enable_event,
-	.disable		= x86_pmu_disable_event,
+	.disable		= amd_pmu_disable_event,
 	.hw_config		= amd_pmu_hw_config,
 	.schedule_events	= x86_schedule_events,
 	.eventsel		= MSR_K7_EVNTSEL0,
@@ -732,7 +862,7 @@ void amd_pmu_enable_virt(void)
 	cpuc->perf_ctr_virt_mask = 0;
 
 	/* Reload all events */
-	x86_pmu_disable_all();
+	amd_pmu_disable_all();
 	x86_pmu_enable_all(0);
 }
 EXPORT_SYMBOL_GPL(amd_pmu_enable_virt);
@@ -750,7 +880,7 @@ void amd_pmu_disable_virt(void)
 	cpuc->perf_ctr_virt_mask = AMD64_EVENTSEL_HOSTONLY;
 
 	/* Reload all events */
-	x86_pmu_disable_all();
+	amd_pmu_disable_all();
 	x86_pmu_enable_all(0);
 }
 EXPORT_SYMBOL_GPL(amd_pmu_disable_virt);
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index 24dab9ad4fd6..87b50f4be201 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -1369,8 +1369,9 @@ void x86_pmu_stop(struct perf_event *event, int flags)
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
 
-	if (__test_and_clear_bit(hwc->idx, cpuc->active_mask)) {
+	if (test_bit(hwc->idx, cpuc->active_mask)) {
 		x86_pmu.disable(event);
+		__clear_bit(hwc->idx, cpuc->active_mask);
 		cpuc->events[hwc->idx] = NULL;
 		WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
 		hwc->state |= PERF_HES_STOPPED;
@@ -1463,16 +1464,8 @@ int x86_pmu_handle_irq(struct pt_regs *regs)
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
 
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
-		if (!test_bit(idx, cpuc->active_mask)) {
-			/*
-			 * Though we deactivated the counter some cpus
-			 * might still deliver spurious interrupts still
-			 * in flight. Catch them:
-			 */
-			if (__test_and_clear_bit(idx, cpuc->running))
-				handled++;
+		if (!test_bit(idx, cpuc->active_mask))
 			continue;
-		}
 
 		event = cpuc->events[idx];
 
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index 62394e1b2390..1403c05e25e2 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3188,7 +3188,7 @@ static int intel_pmu_hw_config(struct perf_event *event)
 		return ret;
 
 	if (event->attr.precise_ip) {
-		if (!event->attr.freq) {
+		if (!(event->attr.freq || event->attr.wakeup_events)) {
 			event->hw.flags |= PERF_X86_EVENT_AUTO_RELOAD;
 			if (!(event->attr.sample_type &
 			      ~intel_pmu_large_pebs_flags(event)))
@@ -3578,6 +3578,12 @@ static void intel_pmu_cpu_starting(int cpu)
 
 	cpuc->lbr_sel = NULL;
 
+	if (x86_pmu.flags & PMU_FL_TFA) {
+		WARN_ON_ONCE(cpuc->tfa_shadow);
+		cpuc->tfa_shadow = ~0ULL;
+		intel_set_tfa(cpuc, false);
+	}
+
 	if (x86_pmu.version > 1)
 		flip_smm_bit(&x86_pmu.attr_freeze_on_smi);