sparc32: remove sun4c traps

We used to runtime patch the trap table for srmmu.
With the removal of sun4c support this is no longer required.

With the sun4c trap removed we can remove all the referenced
trap handling which is sun4c specific.
This also allows us to get rid of the nosun4c.c file that
contained only dummy functions/data.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 1 insertions, 54 deletions

diff --git a/arch/sparc/include/asm/head_32.h b/arch/sparc/include/asm/head_32.h
index 5ceb7faee3f1..25460390fc70 100644
--- a/arch/sparc/include/asm/head_32.h
+++ b/arch/sparc/include/asm/head_32.h
@@ -18,9 +18,7 @@
 #define TRAP_ENTRY(type, label) \
 	rd %psr, %l0; b label; rd %wim, %l3; nop;
 
-/* Data/text faults. Defaults to sun4c version at boot time. */
-#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
-#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
+/* Data/text faults */
 #define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
 #define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
 
diff --git a/arch/sparc/include/asm/memreg.h b/arch/sparc/include/asm/memreg.h
deleted file mode 100644
index 845ad2b39183..000000000000
--- a/arch/sparc/include/asm/memreg.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _SPARC_MEMREG_H
-#define _SPARC_MEMREG_H
-/* memreg.h:  Definitions of the values found in the synchronous
- *            and asynchronous memory error registers when a fault
- *            occurs on the sun4c.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-/* First the synchronous error codes, these are usually just
- * normal page faults.
- */
-
-#define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
-#define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
-#define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
-#define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
-#define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
-#define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
-#define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
-#define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
-
-#define SUN4C_SYNC_BOLIXED  \
-        (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
-         SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
-
-/* Now the asynchronous error codes, these are almost always produced
- * by the cache writing things back to memory and getting a bad translation.
- * Bad DVMA transactions can cause these faults too.
- */
-
-#define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
-#define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
-#define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
-
-/* Memory parity error register with associated bit constants. */
-#ifndef __ASSEMBLY__
-extern __volatile__ unsigned long __iomem *sun4c_memerr_reg;
-#endif
-
-#define	SUN4C_MPE_ERROR	0x80	/* Parity error detected. (ro) */
-#define	SUN4C_MPE_MULTI	0x40	/* Multiple parity errors detected. (ro) */
-#define	SUN4C_MPE_TEST	0x20	/* Write inverse parity. (rw) */
-#define	SUN4C_MPE_CHECK	0x10	/* Enable parity checking. (rw) */
-#define	SUN4C_MPE_ERR00	0x08	/* Parity error in bits 0-7. (ro) */
-#define	SUN4C_MPE_ERR08	0x04	/* Parity error in bits 8-15. (ro) */
-#define	SUN4C_MPE_ERR16	0x02	/* Parity error in bits 16-23. (ro) */
-#define	SUN4C_MPE_ERR24	0x01	/* Parity error in bits 24-31. (ro) */
-#define	SUN4C_MPE_ERRS	0x0F	/* Bit mask for the error bits. (ro) */
-
-#endif /* !(_SPARC_MEMREG_H) */