KVM: s390: hardware support for guest debugging

This patch adds support to debug the guest using the PER facility on s390.
Single-stepping, hardware breakpoints and hardware watchpoints are supported. In
order to use the PER facility of the guest without it noticing it, the control
registers of the guest have to be patched and access to them has to be
intercepted(stctl, stctg, lctl, lctlg).

All PER program interrupts have to be intercepted and only the relevant PER
interrupts for the guest have to be given back. Special care has to be taken
about repeated exits on the same hardware breakpoint. The intervention of the
host in the guests PER configuration is not fully transparent. PER instruction
nullification can not be used by the guest and too many storage alteration
events may be reported to the guest (if it is activated for special address
ranges only) when the host concurrently debugging it.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

1 files changed, 49 insertions, 4 deletions

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 5d9648925a8e..0d45f6fe734f 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -93,13 +93,18 @@ struct kvm_s390_sie_block {
 	__u8	reserved40[4];		/* 0x0040 */
 #define LCTL_CR0	0x8000
 #define LCTL_CR6	0x0200
+#define LCTL_CR9	0x0040
+#define LCTL_CR10	0x0020
+#define LCTL_CR11	0x0010
 #define LCTL_CR14	0x0002
 	__u16   lctl;			/* 0x0044 */
 	__s16	icpua;			/* 0x0046 */
-#define ICTL_LPSW 0x00400000
-#define ICTL_ISKE 0x00004000
-#define ICTL_SSKE 0x00002000
-#define ICTL_RRBE 0x00001000
+#define ICTL_PINT	0x20000000
+#define ICTL_LPSW	0x00400000
+#define ICTL_STCTL	0x00040000
+#define ICTL_ISKE	0x00004000
+#define ICTL_SSKE	0x00002000
+#define ICTL_RRBE	0x00001000
 	__u32	ictl;			/* 0x0048 */
 	__u32	eca;			/* 0x004c */
 #define ICPT_INST	0x04
@@ -306,6 +311,45 @@ struct kvm_s390_float_interrupt {
 	unsigned int irq_count;
 };
 
+struct kvm_hw_wp_info_arch {
+	unsigned long addr;
+	unsigned long phys_addr;
+	int len;
+	char *old_data;
+};
+
+struct kvm_hw_bp_info_arch {
+	unsigned long addr;
+	int len;
+};
+
+/*
+ * Only the upper 16 bits of kvm_guest_debug->control are arch specific.
+ * Further KVM_GUESTDBG flags which an be used from userspace can be found in
+ * arch/s390/include/uapi/asm/kvm.h
+ */
+#define KVM_GUESTDBG_EXIT_PENDING 0x10000000
+
+#define guestdbg_enabled(vcpu) \
+		(vcpu->guest_debug & KVM_GUESTDBG_ENABLE)
+#define guestdbg_sstep_enabled(vcpu) \
+		(vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+#define guestdbg_hw_bp_enabled(vcpu) \
+		(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
+#define guestdbg_exit_pending(vcpu) (guestdbg_enabled(vcpu) && \
+		(vcpu->guest_debug & KVM_GUESTDBG_EXIT_PENDING))
+
+struct kvm_guestdbg_info_arch {
+	unsigned long cr0;
+	unsigned long cr9;
+	unsigned long cr10;
+	unsigned long cr11;
+	struct kvm_hw_bp_info_arch *hw_bp_info;
+	struct kvm_hw_wp_info_arch *hw_wp_info;
+	int nr_hw_bp;
+	int nr_hw_wp;
+	unsigned long last_bp;
+};
 
 struct kvm_vcpu_arch {
 	struct kvm_s390_sie_block *sie_block;
@@ -321,6 +365,7 @@ struct kvm_vcpu_arch {
 		u64		stidp_data;
 	};
 	struct gmap *gmap;
+	struct kvm_guestdbg_info_arch guestdbg;
 #define KVM_S390_PFAULT_TOKEN_INVALID	(-1UL)
 	unsigned long pfault_token;
 	unsigned long pfault_select;