Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 119 insertions, 0 deletions

diff --git a/arch/ppc/platforms/rpxclassic.h b/arch/ppc/platforms/rpxclassic.h
new file mode 100644
index 000000000000..6daa109491c4
--- /dev/null
+++ b/arch/ppc/platforms/rpxclassic.h
@@ -0,0 +1,119 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the RPCG RPX-Classic board.  Copied from the RPX-Lite stuff.
+ *
+ * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+ */
+#ifdef __KERNEL__
+#ifndef __MACH_RPX_DEFS
+#define __MACH_RPX_DEFS
+
+#include <linux/config.h>
+
+#ifndef __ASSEMBLY__
+/* A Board Information structure that is given to a program when
+ * prom starts it up.
+ */
+typedef struct bd_info {
+	unsigned int	bi_memstart;	/* Memory start address */
+	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
+	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
+	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
+	unsigned char	bi_enetaddr[6];
+	unsigned int	bi_baudrate;
+} bd_t;
+
+extern bd_t m8xx_board_info;
+
+/* Memory map is configured by the PROM startup.
+ * We just map a few things we need.  The CSR is actually 4 byte-wide
+ * registers that can be accessed as 8-, 16-, or 32-bit values.
+ */
+#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
+#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
+#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
+#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
+#define RPX_CSR_ADDR		((uint)0xfa400000)
+#define RPX_CSR_SIZE		((uint)(4 * 1024))
+#define IMAP_ADDR		((uint)0xfa200000)
+#define IMAP_SIZE		((uint)(64 * 1024))
+#define PCI_CSR_ADDR		((uint)0x80000000)
+#define PCI_CSR_SIZE		((uint)(64 * 1024))
+#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
+#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
+#define PCMCIA_IO_ADDR		((uint)0xe4000000)
+#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
+#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
+#define PCMCIA_ATTRB_SIZE	((uint)(4 * 1024))
+
+/* Things of interest in the CSR.
+*/
+#define BCSR0_ETHEN		((uint)0x80000000)
+#define BCSR0_ETHLPBK		((uint)0x40000000)
+#define BCSR0_COLTESTDIS	((uint)0x20000000)
+#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
+#define BCSR0_ENFLSHSEL		((uint)0x04000000)
+#define BCSR0_FLASH_SEL		((uint)0x02000000)
+#define BCSR0_ENMONXCVR		((uint)0x01000000)
+
+#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)	/* CLLF */
+#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)	/* CLLF */
+#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)	/* CLLF */
+
+#define BCSR1_IPB5SEL           ((uint)0x00100000)
+#define BCSR1_PCVCTL4           ((uint)0x00080000)
+#define BCSR1_PCVCTL5           ((uint)0x00040000)
+#define BCSR1_PCVCTL6           ((uint)0x00020000)
+#define BCSR1_PCVCTL7           ((uint)0x00010000)
+
+#define BCSR2_EN232XCVR		((uint)0x00008000)
+#define BCSR2_QSPACESEL		((uint)0x00004000)
+#define BCSR2_FETHLEDMODE	((uint)0x00000800)	/* CLLF */
+
+#if defined(CONFIG_HTDMSOUND)
+#include <platforms/rpxhiox.h>
+#endif
+
+/* define IO_BASE for pcmcia, CLLF only */
+#if !defined(CONFIG_PCI)
+#define _IO_BASE 0x80000000
+#define _IO_BASE_SIZE 0x1000
+
+/* for pcmcia sandisk */
+#ifdef CONFIG_IDE
+# define MAX_HWIFS 1
+#endif
+#endif
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
+
+
+/* CPM Ethernet through SCCx.
+ *
+ * Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+#define PA_ENET_RXD	((ushort)0x0001)
+#define PA_ENET_TXD	((ushort)0x0002)
+#define PA_ENET_TCLK	((ushort)0x0200)
+#define PA_ENET_RCLK	((ushort)0x0800)
+#define PB_ENET_TENA	((uint)0x00001000)
+#define PC_ENET_CLSN	((ushort)0x0010)
+#define PC_ENET_RENA	((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK	((uint)0x000000ff)
+#define SICR_ENET_CLKRT	((uint)0x0000003d)
+
+/* We don't use the 8259.
+*/
+
+#define NR_8259_INTS	0
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __MACH_RPX_DEFS */
+#endif /* __KERNEL__ */