[PATCH] ppc32: board-specific part of fs_enet update

This contains board-specific portion to respect driver changes (for 8272ads ,
885ads and 866ads).  Altered platform_data structures as well as initial setup
routines relevant to fs_enet.

Changes to the mpc8560ads ppc/ code are also introduced, but mainly as
reference, since the entire board support is going to appear in arch/powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 66 insertions, 109 deletions

diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
index c1fc4a16fea9..5dfa4e6c2af0 100644
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -38,7 +38,10 @@ extern unsigned char __res[];
 static void setup_smc1_ioports(void);
 static void setup_smc2_ioports(void);
 
-static void __init mpc885ads_scc_phy_init(char);
+static struct fs_mii_fec_platform_info	mpc8xx_mdio_fec_pdata;
+static void setup_fec1_ioports(void);
+static void setup_fec2_ioports(void);
+static void setup_scc3_ioports(void);
 
 static struct fs_uart_platform_info mpc885_uart_pdata[] = {
 	[fsid_smc1_uart] = {
@@ -61,23 +64,8 @@ static struct fs_uart_platform_info mpc885_uart_pdata[] = {
  	},
 };
 
-static struct fs_mii_bus_info fec_mii_bus_info = {
-	.method = fsmii_fec,
-	.id = 0,
-};
-
-static struct fs_mii_bus_info scc_mii_bus_info = {
-#ifdef CONFIG_SCC_ENET_8xx_FIXED
-	.method = fsmii_fixed,
-#else
-	.method = fsmii_fec,
-#endif
-
-	.id = 0,
-};
-
-static struct fs_platform_info mpc8xx_fec_pdata[] = {
-	{
+static struct fs_platform_info mpc8xx_enet_pdata[] = {
+	[fsid_fec1] = {
 	 .rx_ring = 128,
 	 .tx_ring = 16,
 	 .rx_copybreak = 240,
@@ -85,11 +73,12 @@ static struct fs_platform_info mpc8xx_fec_pdata[] = {
 	 .use_napi = 1,
 	 .napi_weight = 17,
 
-	 .phy_addr = 0,
-	 .phy_irq = SIU_IRQ7,
+	 .init_ioports = setup_fec1_ioports,
 
-	 .bus_info = &fec_mii_bus_info,
-	 }, {
+          .bus_id = "0:00",
+          .has_phy = 1,
+	 },
+	[fsid_fec2] = {
 	     .rx_ring = 128,
 	     .tx_ring = 16,
 	     .rx_copybreak = 240,
@@ -97,35 +86,32 @@ static struct fs_platform_info mpc8xx_fec_pdata[] = {
 	     .use_napi = 1,
 	     .napi_weight = 17,
 
-	     .phy_addr = 1,
-	     .phy_irq = SIU_IRQ7,
-
-	     .bus_info = &fec_mii_bus_info,
-	     }
-};
+	     .init_ioports = setup_fec2_ioports,
 
-static struct fs_platform_info mpc8xx_scc_pdata = {
-	.rx_ring = 64,
-	.tx_ring = 8,
-	.rx_copybreak = 240,
+ 	     .bus_id = "0:01",
+ 	     .has_phy = 1,
+	     },
+	[fsid_scc3] = {
+		.rx_ring = 64,
+		.tx_ring = 8,
+		.rx_copybreak = 240,
 
-	.use_napi = 1,
-	.napi_weight = 17,
+		.use_napi = 1,
+		.napi_weight = 17,
 
-	.phy_addr = 2,
-#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED
-	.phy_irq = -1,
+		.init_ioports = setup_scc3_ioports,
+#ifdef CONFIG_FIXED_MII_10_FDX
+		.bus_id = "fixed@100:1",
 #else
-	.phy_irq = SIU_IRQ7,
-#endif
-
-	.bus_info = &scc_mii_bus_info,
+		.bus_id = "0:02",
+ #endif
+	},
 };
 
 void __init board_init(void)
 {
-	volatile cpm8xx_t *cp = cpmp;
-	unsigned int *bcsr_io;
+	cpm8xx_t *cp = cpmp;
+ 	unsigned int *bcsr_io;
 
 #ifdef CONFIG_FS_ENET
 	immap_t *immap = (immap_t *) IMAP_ADDR;
@@ -164,6 +150,14 @@ void __init board_init(void)
 	/* use MDC for MII (common) */
 	setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
 	clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
+	bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
+	clrbits32(bcsr_io,BCSR5_MII1_EN);
+	clrbits32(bcsr_io,BCSR5_MII1_RST);
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	clrbits32(bcsr_io,BCSR5_MII2_EN);
+	clrbits32(bcsr_io,BCSR5_MII2_RST);
+#endif
+	iounmap(bcsr_io);
 #endif
 }
 
@@ -194,8 +188,8 @@ static void setup_fec2_ioports(void)
 	/* configure FEC2 pins */
 	setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
 	setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
-	setbits32(&immap->im_cpm.cp_peso, 0x00037800);
 	clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
+	setbits32(&immap->im_cpm.cp_peso, 0x00037800);
 	clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
 }
 
@@ -213,6 +207,8 @@ static void setup_scc3_ioports(void)
 
 	/* Enable the PHY.
 	 */
+	clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
+	udelay(1000);
 	setbits32(bcsr_io+4, BCSR4_ETH10_RST);
 	/* Configure port A pins for Txd and Rxd.
 	 */
@@ -254,37 +250,38 @@ static void setup_scc3_ioports(void)
 	clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
 	setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
 
-	setbits32(bcsr_io+1, BCSR1_ETHEN);
+	setbits32(bcsr_io+4, BCSR1_ETHEN);
 	iounmap(bcsr_io);
 }
 
+static int mac_count = 0;
+
 static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
 {
-	struct fs_platform_info *fpi = pdev->dev.platform_data;
-
-	volatile cpm8xx_t *cp;
+ 	struct fs_platform_info *fpi;
 	bd_t *bd = (bd_t *) __res;
 	char *e;
 	int i;
 
-	/* Get pointer to Communication Processor */
-	cp = cpmp;
+	if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) {
+		printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
+		return;
+	}
+
+	fpi = &mpc8xx_enet_pdata[fs_no];
+
 	switch (fs_no) {
 	case fsid_fec1:
-		fpi = &mpc8xx_fec_pdata[0];
 		fpi->init_ioports = &setup_fec1_ioports;
 		break;
 	case fsid_fec2:
-		fpi = &mpc8xx_fec_pdata[1];
 		fpi->init_ioports = &setup_fec2_ioports;
 		break;
 	case fsid_scc3:
-		fpi = &mpc8xx_scc_pdata;
 		fpi->init_ioports = &setup_scc3_ioports;
-		mpc885ads_scc_phy_init(fpi->phy_addr);
 		break;
 	default:
-    	        printk(KERN_WARNING"Device %s is not supported!\n", pdev->name);
+    	        printk(KERN_WARNING "Device %s is not supported!\n", pdev->name);
 	        return;
 	}
 
@@ -295,7 +292,7 @@ static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
 	for (i = 0; i < 6; i++)
 		fpi->macaddr[i] = *e++;
 
-	fpi->macaddr[5 - pdev->id]++;
+	fpi->macaddr[5] += mac_count++;
 
 }
 
@@ -318,58 +315,6 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
 	mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
 }
 
-/* SCC ethernet controller does not have MII management channel. FEC1 MII
- * channel is used to communicate with the 10Mbit PHY.
- */
-
-#define MII_ECNTRL_PINMUX        0x4
-#define FEC_ECNTRL_PINMUX        0x00000004
-#define FEC_RCNTRL_MII_MODE        0x00000004
-
-/* Make MII read/write commands.
- */
-#define mk_mii_write(REG, VAL, PHY_ADDR)    (0x50020000 | (((REG) & 0x1f) << 18) | \
-                ((VAL) & 0xffff) | ((PHY_ADDR) << 23))
-
-static void mpc885ads_scc_phy_init(char phy_addr)
-{
-	volatile immap_t *immap;
-	volatile fec_t *fecp;
-	bd_t *bd;
-
-	bd = (bd_t *) __res;
-	immap = (immap_t *) IMAP_ADDR;	/* pointer to internal registers */
-	fecp = &(immap->im_cpm.cp_fec);
-
-	/* Enable MII pins of the FEC1
-	 */
-	setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
-	clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
-	/* Set MII speed to 2.5 MHz
-	 */
-	out_be32(&fecp->fec_mii_speed,
-		 ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1);
-
-	/* Enable FEC pin MUX
-	 */
-	setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
-	setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
-
-	out_be32(&fecp->fec_mii_data,
-		 mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr));
-	udelay(100);
-	out_be32(&fecp->fec_mii_data,
-		 mk_mii_write(MII_ADVERTISE,
-			      ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr));
-	udelay(100);
-
-	/* Disable FEC MII settings
-	 */
-	clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
-	clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
-	out_be32(&fecp->fec_mii_speed, 0);
-}
-
 static void setup_smc1_ioports(void)
 {
         immap_t *immap = (immap_t *) IMAP_ADDR;
@@ -462,6 +407,9 @@ static int mpc885ads_platform_notify(struct device *dev)
 
 int __init mpc885ads_init(void)
 {
+	struct fs_mii_fec_platform_info* fmpi;
+	bd_t *bd = (bd_t *) __res;
+
 	printk(KERN_NOTICE "mpc885ads: Init\n");
 
 	platform_notify = mpc885ads_platform_notify;
@@ -471,8 +419,17 @@ int __init mpc885ads_init(void)
 
 	ppc_sys_device_enable(MPC8xx_CPM_FEC1);
 
+	ppc_sys_device_enable(MPC8xx_MDIO_FEC);
+	fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
+		&mpc8xx_mdio_fec_pdata;
+
+	fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
+
+	/* No PHY interrupt line here */
+	fmpi->irq[0xf] = SIU_IRQ7;
+
 #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
-	ppc_sys_device_enable(MPC8xx_CPM_SCC1);
+	ppc_sys_device_enable(MPC8xx_CPM_SCC3);
 
 #endif
 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2