diff options
| author | Roy Zang <tie-fei.zang@freescale.com> | 2011-11-07 16:32:58 +0800 |
|---|---|---|
| committer | Kumar Gala <galak@kernel.crashing.org> | 2011-11-23 22:55:47 -0600 |
| commit | c3c3ced77fd1949af753be7731bfdadae88a226b (patch) | |
| tree | df760d78a12c91e7352088d79d1365ce2fa19e81 /arch/powerpc | |
| parent | caca6a03d365883564885f2c1da3e88dcf65d139 (diff) | |
powerpc/p1023: set IRQ[4:6,11] to active-high level sensitive for PCIe
P1023 external IRQ[4:6, 11] are not pin out, but the interrupts are
utilized by the PCIe controllers. As they are not exposed as pins we
need to set them as active-high (internal to the SoC these interrupts
are pulled down).
IRQs[0:3,7:10] are pulled up on the board so we have them set as
active-low.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/boot/dts/p1023rds.dts | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index d9b776740a67..d3b478242ea9 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -449,6 +449,7 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* IRQ[0:3] are pulled up on board, set to active-low */ interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 0 1 @@ -488,11 +489,15 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* + * IRQ[4:6] only for PCIe, set to active-high, + * IRQ[7] is pulled up on board, set to active-low + */ interrupt-map = < /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 + 0000 0 0 1 &mpic 4 2 + 0000 0 0 2 &mpic 5 2 + 0000 0 0 3 &mpic 6 2 0000 0 0 4 &mpic 7 1 >; ranges = <0x2000000 0x0 0xa0000000 @@ -527,12 +532,16 @@ interrupt-parent = <&mpic>; interrupts = <16 2>; interrupt-map-mask = <0xf800 0 0 7>; + /* + * IRQ[8:10] are pulled up on board, set to active-low + * IRQ[11] only for PCIe, set to active-high, + */ interrupt-map = < /* IDSEL 0x0 */ 0000 0 0 1 &mpic 8 1 0000 0 0 2 &mpic 9 1 0000 0 0 3 &mpic 10 1 - 0000 0 0 4 &mpic 11 1 + 0000 0 0 4 &mpic 11 2 >; ranges = <0x2000000 0x0 0x80000000 0x2000000 0x0 0x80000000 |