Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki:

 - ARM big.LITTLE cpufreq driver from Viresh Kumar.

 - exynos5440 cpufreq driver from Amit Daniel Kachhap.

 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.

 - cpufreq scalability improvement from Nathan Zimmer.

 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.

 - cpuidle code consolidation and cleanups from Daniel Lezcano.

 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.

 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
   Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.

 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J Wysocki.

 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
   Rafael J Wysocki and Andy Shevchenko.

* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
  cpufreq: Revert incorrect commit 5800043
  cpufreq: MAINTAINERS: Add co-maintainer
  cpuidle: add maintainer entry
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ARM: s3c64xx: cpuidle: use init/exit common routine
  cpufreq: pxa2xx: initialize variables
  ACPI: video: correct acpi_video_bus_add error processing
  SH: cpuidle: use init/exit common routine
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  ACPI: Fix wrong parameter passed to memblock_reserve
  cpuidle: fix comment format
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ...

10 files changed, 26 insertions, 565 deletions

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 53aaefeb3386..9978f594cac0 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -113,34 +113,10 @@ config CBE_THERM
 	default m
 	depends on CBE_RAS && SPU_BASE
 
-config CBE_CPUFREQ
-	tristate "CBE frequency scaling"
-	depends on CBE_RAS && CPU_FREQ
-	default m
-	help
-	  This adds the cpufreq driver for Cell BE processors.
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-	  If you don't have such processor, say N
-
-config CBE_CPUFREQ_PMI_ENABLE
-	bool "CBE frequency scaling using PMI interface"
-	depends on CBE_CPUFREQ
-	default n
-	help
-	  Select this, if you want to use the PMI interface
-	  to switch frequencies. Using PMI, the
-	  processor will not only be able to run at lower speed,
-	  but also at lower core voltage.
-
-config CBE_CPUFREQ_PMI
-	tristate
-	depends on CBE_CPUFREQ_PMI_ENABLE
-	default CBE_CPUFREQ
-
 config PPC_PMI
 	tristate
 	default y
-	depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON
+	depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON
 	help
 	  PMI (Platform Management Interrupt) is a way to
 	  communicate with the BMC (Baseboard Management Controller).
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index a4a89350bcfc..fe053e7c73ee 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE)		+= iommu.o setup.o spider-pic.o \
 obj-$(CONFIG_CBE_RAS)			+= ras.o
 
 obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
-obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
-obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
-cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
 obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
 
 obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c
deleted file mode 100644
index d4c39e32f147..000000000000
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * cpufreq driver for the cell processor
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/cpufreq.h>
-#include <linux/module.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/cell-regs.h>
-#include "cbe_cpufreq.h"
-
-static DEFINE_MUTEX(cbe_switch_mutex);
-
-
-/* the CBE supports an 8 step frequency scaling */
-static struct cpufreq_frequency_table cbe_freqs[] = {
-	{1,	0},
-	{2,	0},
-	{3,	0},
-	{4,	0},
-	{5,	0},
-	{6,	0},
-	{8,	0},
-	{10,	0},
-	{0,	CPUFREQ_TABLE_END},
-};
-
-/*
- * hardware specific functions
- */
-
-static int set_pmode(unsigned int cpu, unsigned int slow_mode)
-{
-	int rc;
-
-	if (cbe_cpufreq_has_pmi)
-		rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode);
-	else
-		rc = cbe_cpufreq_set_pmode(cpu, slow_mode);
-
-	pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu));
-
-	return rc;
-}
-
-/*
- * cpufreq functions
- */
-
-static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	const u32 *max_freqp;
-	u32 max_freq;
-	int i, cur_pmode;
-	struct device_node *cpu;
-
-	cpu = of_get_cpu_node(policy->cpu, NULL);
-
-	if (!cpu)
-		return -ENODEV;
-
-	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
-	/*
-	 * Let's check we can actually get to the CELL regs
-	 */
-	if (!cbe_get_cpu_pmd_regs(policy->cpu) ||
-	    !cbe_get_cpu_mic_tm_regs(policy->cpu)) {
-		pr_info("invalid CBE regs pointers for cpufreq\n");
-		return -EINVAL;
-	}
-
-	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
-
-	of_node_put(cpu);
-
-	if (!max_freqp)
-		return -EINVAL;
-
-	/* we need the freq in kHz */
-	max_freq = *max_freqp / 1000;
-
-	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
-	pr_debug("initializing frequency table\n");
-
-	/* initialize frequency table */
-	for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
-		cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index;
-		pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
-	}
-
-	/* if DEBUG is enabled set_pmode() measures the latency
-	 * of a transition */
-	policy->cpuinfo.transition_latency = 25000;
-
-	cur_pmode = cbe_cpufreq_get_pmode(policy->cpu);
-	pr_debug("current pmode is at %d\n",cur_pmode);
-
-	policy->cur = cbe_freqs[cur_pmode].frequency;
-
-#ifdef CONFIG_SMP
-	cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu));
-#endif
-
-	cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
-
-	/* this ensures that policy->cpuinfo_min
-	 * and policy->cpuinfo_max are set correctly */
-	return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs);
-}
-
-static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static int cbe_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, cbe_freqs);
-}
-
-static int cbe_cpufreq_target(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	int rc;
-	struct cpufreq_freqs freqs;
-	unsigned int cbe_pmode_new;
-
-	cpufreq_frequency_table_target(policy,
-				       cbe_freqs,
-				       target_freq,
-				       relation,
-				       &cbe_pmode_new);
-
-	freqs.old = policy->cur;
-	freqs.new = cbe_freqs[cbe_pmode_new].frequency;
-	freqs.cpu = policy->cpu;
-
-	mutex_lock(&cbe_switch_mutex);
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	pr_debug("setting frequency for cpu %d to %d kHz, " \
-		 "1/%d of max frequency\n",
-		 policy->cpu,
-		 cbe_freqs[cbe_pmode_new].frequency,
-		 cbe_freqs[cbe_pmode_new].index);
-
-	rc = set_pmode(policy->cpu, cbe_pmode_new);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	mutex_unlock(&cbe_switch_mutex);
-
-	return rc;
-}
-
-static struct cpufreq_driver cbe_cpufreq_driver = {
-	.verify		= cbe_cpufreq_verify,
-	.target		= cbe_cpufreq_target,
-	.init		= cbe_cpufreq_cpu_init,
-	.exit		= cbe_cpufreq_cpu_exit,
-	.name		= "cbe-cpufreq",
-	.owner		= THIS_MODULE,
-	.flags		= CPUFREQ_CONST_LOOPS,
-};
-
-/*
- * module init and destoy
- */
-
-static int __init cbe_cpufreq_init(void)
-{
-	if (!machine_is(cell))
-		return -ENODEV;
-
-	return cpufreq_register_driver(&cbe_cpufreq_driver);
-}
-
-static void __exit cbe_cpufreq_exit(void)
-{
-	cpufreq_unregister_driver(&cbe_cpufreq_driver);
-}
-
-module_init(cbe_cpufreq_init);
-module_exit(cbe_cpufreq_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.h b/arch/powerpc/platforms/cell/cbe_cpufreq.h
deleted file mode 100644
index c1d86bfa92ff..000000000000
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * cbe_cpufreq.h
- *
- * This file contains the definitions used by the cbe_cpufreq driver.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- */
-
-#include <linux/cpufreq.h>
-#include <linux/types.h>
-
-int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode);
-int cbe_cpufreq_get_pmode(int cpu);
-
-int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
-
-#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE)
-extern bool cbe_cpufreq_has_pmi;
-#else
-#define cbe_cpufreq_has_pmi (0)
-#endif
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
deleted file mode 100644
index 20472e487b6f..000000000000
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * pervasive backend for the cbe_cpufreq driver
- *
- * This driver makes use of the pervasive unit to
- * engage the desired frequency.
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <asm/machdep.h>
-#include <asm/hw_irq.h>
-#include <asm/cell-regs.h>
-
-#include "cbe_cpufreq.h"
-
-/* to write to MIC register */
-static u64 MIC_Slow_Fast_Timer_table[] = {
-	[0 ... 7] = 0x007fc00000000000ull,
-};
-
-/* more values for the MIC */
-static u64 MIC_Slow_Next_Timer_table[] = {
-	0x0000240000000000ull,
-	0x0000268000000000ull,
-	0x000029C000000000ull,
-	0x00002D0000000000ull,
-	0x0000300000000000ull,
-	0x0000334000000000ull,
-	0x000039C000000000ull,
-	0x00003FC000000000ull,
-};
-
-
-int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode)
-{
-	struct cbe_pmd_regs __iomem *pmd_regs;
-	struct cbe_mic_tm_regs __iomem *mic_tm_regs;
-	unsigned long flags;
-	u64 value;
-#ifdef DEBUG
-	long time;
-#endif
-
-	local_irq_save(flags);
-
-	mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu);
-	pmd_regs = cbe_get_cpu_pmd_regs(cpu);
-
-#ifdef DEBUG
-	time = jiffies;
-#endif
-
-	out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]);
-	out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]);
-
-	out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]);
-	out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]);
-
-	value = in_be64(&pmd_regs->pmcr);
-	/* set bits to zero */
-	value &= 0xFFFFFFFFFFFFFFF8ull;
-	/* set bits to next pmode */
-	value |= pmode;
-
-	out_be64(&pmd_regs->pmcr, value);
-
-#ifdef DEBUG
-	/* wait until new pmode appears in status register */
-	value = in_be64(&pmd_regs->pmsr) & 0x07;
-	while (value != pmode) {
-		cpu_relax();
-		value = in_be64(&pmd_regs->pmsr) & 0x07;
-	}
-
-	time = jiffies  - time;
-	time = jiffies_to_msecs(time);
-	pr_debug("had to wait %lu ms for a transition using " \
-		 "pervasive unit\n", time);
-#endif
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-
-int cbe_cpufreq_get_pmode(int cpu)
-{
-	int ret;
-	struct cbe_pmd_regs __iomem *pmd_regs;
-
-	pmd_regs = cbe_get_cpu_pmd_regs(cpu);
-	ret = in_be64(&pmd_regs->pmsr) & 0x07;
-
-	return ret;
-}
-
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
deleted file mode 100644
index 60a07a4f9326..000000000000
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * pmi backend for the cbe_cpufreq driver
- *
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
- *
- * Author: Christian Krafft <krafft@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/timer.h>
-#include <linux/module.h>
-#include <linux/of_platform.h>
-
-#include <asm/processor.h>
-#include <asm/prom.h>
-#include <asm/pmi.h>
-#include <asm/cell-regs.h>
-
-#ifdef DEBUG
-#include <asm/time.h>
-#endif
-
-#include "cbe_cpufreq.h"
-
-static u8 pmi_slow_mode_limit[MAX_CBE];
-
-bool cbe_cpufreq_has_pmi = false;
-EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi);
-
-/*
- * hardware specific functions
- */
-
-int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode)
-{
-	int ret;
-	pmi_message_t pmi_msg;
-#ifdef DEBUG
-	long time;
-#endif
-	pmi_msg.type = PMI_TYPE_FREQ_CHANGE;
-	pmi_msg.data1 =	cbe_cpu_to_node(cpu);
-	pmi_msg.data2 = pmode;
-
-#ifdef DEBUG
-	time = jiffies;
-#endif
-	pmi_send_message(pmi_msg);
-
-#ifdef DEBUG
-	time = jiffies  - time;
-	time = jiffies_to_msecs(time);
-	pr_debug("had to wait %lu ms for a transition using " \
-		 "PMI\n", time);
-#endif
-	ret = pmi_msg.data2;
-	pr_debug("PMI returned slow mode %d\n", ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi);
-
-
-static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg)
-{
-	u8 node, slow_mode;
-
-	BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE);
-
-	node = pmi_msg.data1;
-	slow_mode = pmi_msg.data2;
-
-	pmi_slow_mode_limit[node] = slow_mode;
-
-	pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode);
-}
-
-static int pmi_notifier(struct notifier_block *nb,
-				       unsigned long event, void *data)
-{
-	struct cpufreq_policy *policy = data;
-	struct cpufreq_frequency_table *cbe_freqs;
-	u8 node;
-
-	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
-	 * and CPUFREQ_NOTIFY policy events?)
-	 */
-	if (event == CPUFREQ_START)
-		return 0;
-
-	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
-	node = cbe_cpu_to_node(policy->cpu);
-
-	pr_debug("got notified, event=%lu, node=%u\n", event, node);
-
-	if (pmi_slow_mode_limit[node] != 0) {
-		pr_debug("limiting node %d to slow mode %d\n",
-			 node, pmi_slow_mode_limit[node]);
-
-		cpufreq_verify_within_limits(policy, 0,
-
-			cbe_freqs[pmi_slow_mode_limit[node]].frequency);
-	}
-
-	return 0;
-}
-
-static struct notifier_block pmi_notifier_block = {
-	.notifier_call = pmi_notifier,
-};
-
-static struct pmi_handler cbe_pmi_handler = {
-	.type			= PMI_TYPE_FREQ_CHANGE,
-	.handle_pmi_message	= cbe_cpufreq_handle_pmi,
-};
-
-
-
-static int __init cbe_cpufreq_pmi_init(void)
-{
-	cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0;
-
-	if (!cbe_cpufreq_has_pmi)
-		return -ENODEV;
-
-	cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
-
-	return 0;
-}
-
-static void __exit cbe_cpufreq_pmi_exit(void)
-{
-	cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
-	pmi_unregister_handler(&cbe_pmi_handler);
-}
-
-module_init(cbe_cpufreq_pmi_init);
-module_exit(cbe_cpufreq_pmi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index 890f30e70f98..be1e7958909e 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -273,10 +273,9 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = policy->cur;
 	freqs.new = pas_freqs[pas_astate_new].frequency;
-	freqs.cpu = policy->cpu;
 
 	mutex_lock(&pas_switch_mutex);
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
 		 policy->cpu,
@@ -288,7 +287,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy,
 	for_each_online_cpu(i)
 		set_astate(i, pas_astate_new);
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	mutex_unlock(&pas_switch_mutex);
 
 	ppc_proc_freq = freqs.new * 1000ul;
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 311b804353b1..3104fad82480 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -335,7 +335,8 @@ static int pmu_set_cpu_speed(int low_speed)
 	return 0;
 }
 
-static int do_set_cpu_speed(int speed_mode, int notify)
+static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
+		int notify)
 {
 	struct cpufreq_freqs freqs;
 	unsigned long l3cr;
@@ -343,13 +344,12 @@ static int do_set_cpu_speed(int speed_mode, int notify)
 
 	freqs.old = cur_freq;
 	freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
-	freqs.cpu = smp_processor_id();
 
 	if (freqs.old == freqs.new)
 		return 0;
 
 	if (notify)
-		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+		cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	if (speed_mode == CPUFREQ_LOW &&
 	    cpu_has_feature(CPU_FTR_L3CR)) {
 		l3cr = _get_L3CR();
@@ -366,7 +366,7 @@ static int do_set_cpu_speed(int speed_mode, int notify)
 			_set_L3CR(prev_l3cr);
 	}
 	if (notify)
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+		cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
 
 	return 0;
@@ -393,7 +393,7 @@ static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
 			target_freq, relation, &newstate))
 		return -EINVAL;
 
-	rc = do_set_cpu_speed(newstate, 1);
+	rc = do_set_cpu_speed(policy, newstate, 1);
 
 	ppc_proc_freq = cur_freq * 1000ul;
 	return rc;
@@ -442,7 +442,7 @@ static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
 	no_schedule = 1;
 	sleep_freq = cur_freq;
 	if (cur_freq == low_freq && !is_pmu_based)
-		do_set_cpu_speed(CPUFREQ_HIGH, 0);
+		do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
 	return 0;
 }
 
@@ -458,7 +458,7 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
 	 * is that we force a switch to whatever it was, which is
 	 * probably high speed due to our suspend() routine
 	 */
-	do_set_cpu_speed(sleep_freq == low_freq ?
+	do_set_cpu_speed(policy, sleep_freq == low_freq ?
 			 CPUFREQ_LOW : CPUFREQ_HIGH, 0);
 
 	ppc_proc_freq = cur_freq * 1000ul;
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 9650c6029c82..7ba423431cfe 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -339,11 +339,10 @@ static int g5_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
 	freqs.new = g5_cpu_freqs[newstate].frequency;
-	freqs.cpu = 0;
 
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 	rc = g5_switch_freq(newstate);
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
 
 	mutex_unlock(&g5_switch_mutex);
 
diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c
index 4d806b419606..4644efa06941 100644
--- a/arch/powerpc/platforms/pseries/processor_idle.c
+++ b/arch/powerpc/platforms/pseries/processor_idle.c
@@ -23,8 +23,8 @@
 #include "pseries.h"
 
 struct cpuidle_driver pseries_idle_driver = {
-	.name =		"pseries_idle",
-	.owner =	THIS_MODULE,
+	.name             = "pseries_idle",
+	.owner            = THIS_MODULE,
 };
 
 #define MAX_IDLE_STATE_COUNT	2
@@ -33,10 +33,8 @@ static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
 static struct cpuidle_device __percpu *pseries_cpuidle_devices;
 static struct cpuidle_state *cpuidle_state_table;
 
-static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
+static inline void idle_loop_prolog(unsigned long *in_purr)
 {
-
-	*kt_before = ktime_get();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -45,12 +43,10 @@ static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
 	get_lppaca()->idle = 1;
 }
 
-static inline  s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
+static inline void idle_loop_epilog(unsigned long in_purr)
 {
 	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->idle = 0;
-
-	return ktime_to_us(ktime_sub(ktime_get(), kt_before));
 }
 
 static int snooze_loop(struct cpuidle_device *dev,
@@ -58,10 +54,9 @@ static int snooze_loop(struct cpuidle_device *dev,
 			int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 	int cpu = dev->cpu;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 	local_irq_enable();
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
@@ -75,8 +70,8 @@ static int snooze_loop(struct cpuidle_device *dev,
 	clear_thread_flag(TIF_POLLING_NRFLAG);
 	smp_mb();
 
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+	idle_loop_epilog(in_purr);
+
 	return index;
 }
 
@@ -102,9 +97,8 @@ static int dedicated_cede_loop(struct cpuidle_device *dev,
 				int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 	get_lppaca()->donate_dedicated_cpu = 1;
 
 	ppc64_runlatch_off();
@@ -112,8 +106,9 @@ static int dedicated_cede_loop(struct cpuidle_device *dev,
 	check_and_cede_processor();
 
 	get_lppaca()->donate_dedicated_cpu = 0;
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+
+	idle_loop_epilog(in_purr);
+
 	return index;
 }
 
@@ -122,9 +117,8 @@ static int shared_cede_loop(struct cpuidle_device *dev,
 			int index)
 {
 	unsigned long in_purr;
-	ktime_t kt_before;
 
-	idle_loop_prolog(&in_purr, &kt_before);
+	idle_loop_prolog(&in_purr);
 
 	/*
 	 * Yield the processor to the hypervisor.  We return if
@@ -135,8 +129,8 @@ static int shared_cede_loop(struct cpuidle_device *dev,
 	 */
 	check_and_cede_processor();
 
-	dev->last_residency =
-		(int)idle_loop_epilog(in_purr, kt_before);
+	idle_loop_epilog(in_purr);
+
 	return index;
 }