Merge branch 'linux-2.6' into for-2.6.24

21 files changed, 532 insertions, 750 deletions

diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 4680e2010887..3e79bf0a3159 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -44,8 +44,18 @@
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00100000>;	// CCSRBAR 1M
+
+
+		ranges = <00001000 e0001000 000ff000
+			  80000000 80000000 20000000
+			  a0000000 a0000000 10000000
+			  b0000000 b0000000 00100000
+			  c0000000 c0000000 20000000
+			  b0100000 b0100000 00100000
+			  e1000000 e1000000 00010000
+			  e1010000 e1010000 00010000
+			  e1020000 e1020000 00010000>;
+		reg = <e0000000 00001000>;	// CCSRBAR 1M
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		memory-controller@2000 {
@@ -161,8 +171,8 @@
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 			bus-range = <0 ff>;
-			ranges = <02000000 0 80000000 80000000 0 10000000
-				  01000000 0 00000000 e2000000 0 00800000>;
+			ranges = <02000000 0 c0000000 c0000000 0 20000000
+				  01000000 0 00000000 e1000000 0 00010000>;
 			clock-frequency = <3f940aa>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
@@ -178,8 +188,8 @@
 			#address-cells = <3>;
 			reg = <9000 1000>;
 			bus-range = <0 ff>;
-			ranges = <02000000 0 90000000 90000000 0 10000000
-				  01000000 0 00000000 e3000000 0 00800000>;
+			ranges = <02000000 0 80000000 80000000 0 20000000
+				  01000000 0 00000000 e1010000 0 00010000>;
 			clock-frequency = <1fca055>;
 			interrupt-parent = <&mpic>;
 			interrupts = <1a 2>;
@@ -202,7 +212,7 @@
 			reg = <a000 1000>;
 			bus-range = <0 ff>;
 			ranges = <02000000 0 a0000000 a0000000 0 10000000
-				  01000000 0 00000000 e2800000 0 00800000>;
+				  01000000 0 00000000 e1020000 0 00010000>;
 			clock-frequency = <1fca055>;
 			interrupt-parent = <&mpic>;
 			interrupts = <19 2>;
@@ -224,49 +234,29 @@
 			#address-cells = <3>;
 			reg = <b000 1000>;
 			bus-range = <0 ff>;
-			ranges = <02000000 0 b0000000 b0000000 0 10000000
-				  01000000 0 00000000 e3800000 0 00800000>;
+			ranges = <02000000 0 b0000000 b0000000 0 00100000
+				  01000000 0 00000000 b0100000 0 00100000>;
 			clock-frequency = <1fca055>;
 			interrupt-parent = <&mpic>;
 			interrupts = <1b 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <fb00 0 0 0>;
 			interrupt-map = <
-
-				// IDSEL 0x1a
-				d000 0 0 1 &i8259 6 2
-				d000 0 0 2 &i8259 3 2
-				d000 0 0 3 &i8259 4 2
-				d000 0 0 4 &i8259 5 2
-
-				// IDSEL 0x1b
-				d800 0 0 1 &i8259 5 2
-				d800 0 0 2 &i8259 0 0
-				d800 0 0 3 &i8259 0 0
-				d800 0 0 4 &i8259 0 0
-
 				// IDSEL 0x1c  USB
-				e000 0 0 1 &i8259 9 2
-				e000 0 0 2 &i8259 a 2
-				e000 0 0 3 &i8259 c 2
-				e000 0 0 4 &i8259 7 2
+				e000 0 0 0 &i8259 c 2
+				e100 0 0 0 &i8259 9 2
+				e200 0 0 0 &i8259 a 2
+				e300 0 0 0 &i8259 b 2
 
 				// IDSEL 0x1d  Audio
-				e800 0 0 1 &i8259 9 2
-				e800 0 0 2 &i8259 a 2
-				e800 0 0 3 &i8259 b 2
-				e800 0 0 4 &i8259 0 0
+				e800 0 0 0 &i8259 6 2
 
 				// IDSEL 0x1e Legacy
-				f000 0 0 1 &i8259 c 2
-				f000 0 0 2 &i8259 0 0
-				f000 0 0 3 &i8259 0 0
-				f000 0 0 4 &i8259 0 0
+				f000 0 0 0 &i8259 7 2
+				f100 0 0 0 &i8259 7 2
 
 				// IDSEL 0x1f IDE/SATA
-				f800 0 0 1 &i8259 6 2
-				f800 0 0 2 &i8259 0 0
-				f800 0 0 3 &i8259 0 0
-				f800 0 0 4 &i8259 0 0
+				f800 0 0 0 &i8259 e 2
+				f900 0 0 0 &i8259 5 2
 			>;
 			uli1575@0 {
 				reg = <0 0 0 0 0>;
@@ -274,10 +264,10 @@
 				#address-cells = <3>;
 				ranges = <02000000 0 b0000000
 					  02000000 0 b0000000
-					  0 10000000
+					  0 00100000
 					  01000000 0 00000000
 					  01000000 0 00000000
-					  0 00080000>;
+					  0 00100000>;
 
 				pci_bridge@0 {
 					reg = <0 0 0 0 0>;
@@ -285,10 +275,10 @@
 					#address-cells = <3>;
 					ranges = <02000000 0 b0000000
 						  02000000 0 b0000000
-						  0 20000000
+						  0 00100000
 						  01000000 0 00000000
 						  01000000 0 00000000
-						  0 00100000>;
+						  0 00100000>; 
 
 					isa@1e {
 						device_type = "isa";
@@ -296,7 +286,8 @@
 						#size-cells = <1>;
 						#address-cells = <2>;
 						reg = <f000 0 0 0 0>;
-						ranges = <1 0 01000000 0 0
+						ranges = <1 0
+							  01000000 0 0
 							  00001000>;
 						interrupt-parent = <&i8259>;
 
@@ -312,8 +303,7 @@
 							built-in;
 							compatible = "chrp,iic";
 							interrupts = <9 2>;
-							interrupt-parent =
-								<&mpic>;
+							interrupt-parent = <&mpic>;
 						};
 
 						i8042@60 {
@@ -321,8 +311,7 @@
 							#address-cells = <1>;
 							reg = <1 60 1 1 64 1>;
 							interrupts = <1 3 c 3>;
-							interrupt-parent =
-								<&i8259>;
+							interrupt-parent = <&i8259>;
 
 							keyboard@0 {
 								reg = <0>;
@@ -336,8 +325,7 @@
 						};
 
 						rtc@70 {
-							compatible =
-								"pnpPNP,b00";
+							compatible = "pnpPNP,b00";
 							reg = <1 70 2>;
 						};
 
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 5d82709cfcbb..b0166e5c177e 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -224,98 +224,36 @@
 			clock-frequency = <1fca055>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <fb00 0 0 0>;
 			interrupt-map = <
 				/* IDSEL 0x11 */
-				8800 0 0 1 &i8259 3 2
-				8800 0 0 2 &i8259 4 2
-				8800 0 0 3 &i8259 5 2
-				8800 0 0 4 &i8259 6 2
+				8800 0 0 1 &i8259 9 2
+				8800 0 0 2 &i8259 a 2
+				8800 0 0 3 &i8259 b 2
+				8800 0 0 4 &i8259 c 2
 
 				/* IDSEL 0x12 */
-				9000 0 0 1 &i8259 4 2
-				9000 0 0 2 &i8259 5 2
-				9000 0 0 3 &i8259 6 2
-				9000 0 0 4 &i8259 3 2
-
-				/* IDSEL 0x13 */
-				9800 0 0 1 &i8259 0 0
-				9800 0 0 2 &i8259 0 0
-				9800 0 0 3 &i8259 0 0
-				9800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x14 */
-				a000 0 0 1 &i8259 0 0
-				a000 0 0 2 &i8259 0 0
-				a000 0 0 3 &i8259 0 0
-				a000 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x15 */
-				a800 0 0 1 &i8259 0 0
-				a800 0 0 2 &i8259 0 0
-				a800 0 0 3 &i8259 0 0
-				a800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x16 */
-				b000 0 0 1 &i8259 0 0
-				b000 0 0 2 &i8259 0 0
-				b000 0 0 3 &i8259 0 0
-				b000 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x17 */
-				b800 0 0 1 &i8259 0 0
-				b800 0 0 2 &i8259 0 0
-				b800 0 0 3 &i8259 0 0
-				b800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x18 */
-				c000 0 0 1 &i8259 0 0
-				c000 0 0 2 &i8259 0 0
-				c000 0 0 3 &i8259 0 0
-				c000 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x19 */
-				c800 0 0 1 &i8259 0 0
-				c800 0 0 2 &i8259 0 0
-				c800 0 0 3 &i8259 0 0
-				c800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x1a */
-				d000 0 0 1 &i8259 6 2
-				d000 0 0 2 &i8259 3 2
-				d000 0 0 3 &i8259 4 2
-				d000 0 0 4 &i8259 5 2
-
-
-				/* IDSEL 0x1b */
-				d800 0 0 1 &i8259 5 2
-				d800 0 0 2 &i8259 0 0
-				d800 0 0 3 &i8259 0 0
-				d800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x1c */
-				e000 0 0 1 &i8259 9 2
-				e000 0 0 2 &i8259 a 2
-				e000 0 0 3 &i8259 c 2
-				e000 0 0 4 &i8259 7 2
-
-				/* IDSEL 0x1d */
-				e800 0 0 1 &i8259 9 2
-				e800 0 0 2 &i8259 a 2
-				e800 0 0 3 &i8259 b 2
-				e800 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x1e */
-				f000 0 0 1 &i8259 c 2
-				f000 0 0 2 &i8259 0 0
-				f000 0 0 3 &i8259 0 0
-				f000 0 0 4 &i8259 0 0
-
-				/* IDSEL 0x1f */
-				f800 0 0 1 &i8259 6 2
-				f800 0 0 2 &i8259 0 0
-				f800 0 0 3 &i8259 0 0
-				f800 0 0 4 &i8259 0 0
+				9000 0 0 1 &i8259 a 2
+				9000 0 0 2 &i8259 b 2
+				9000 0 0 3 &i8259 c 2
+				9000 0 0 4 &i8259 9 2
+
+				// IDSEL 0x1c  USB
+				e000 0 0 0 &i8259 c 2
+				e100 0 0 0 &i8259 9 2
+				e200 0 0 0 &i8259 a 2
+				e300 0 0 0 &i8259 b 2
+
+				// IDSEL 0x1d  Audio
+				e800 0 0 0 &i8259 6 2
+
+				// IDSEL 0x1e Legacy
+				f000 0 0 0 &i8259 7 2
+				f100 0 0 0 &i8259 7 2
+
+				// IDSEL 0x1f IDE/SATA
+				f800 0 0 0 &i8259 e 2
+				f900 0 0 0 &i8259 5 2
 				>;
 			uli1575@0 {
 				reg = <0 0 0 0 0>;
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index d9ac24e8de16..8b47c846421c 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,9 +1,23 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc6
-# Tue Jun 26 12:32:34 2007
+# Linux kernel version: 2.6.23-rc3
+# Wed Aug 22 15:19:19 2007
 #
 CONFIG_PPC64=y
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_MM_SLICES=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
@@ -15,6 +29,7 @@ CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -22,51 +37,33 @@ CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
+CONFIG_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
-
-#
-# Processor support
-#
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
-CONFIG_PPC_FPU=y
 # CONFIG_PPC_DCR_NATIVE is not set
 CONFIG_PPC_DCR_MMIO=y
 CONFIG_PPC_DCR=y
 CONFIG_PPC_OF_PLATFORM_PCI=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -96,16 +93,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -113,12 +107,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -138,7 +129,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_EMBEDDED6xx is not set
-# CONFIG_APUS is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
 # CONFIG_PPC_MPC52xx is not set
@@ -158,7 +151,11 @@ CONFIG_PS3_HTAB_SIZE=20
 CONFIG_PS3_USE_LPAR_ADDR=y
 CONFIG_PS3_VUART=y
 CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=y
+CONFIG_PS3_SYS_MANAGER=m
+CONFIG_PS3_STORAGE=y
+CONFIG_PS3_DISK=y
+CONFIG_PS3_ROM=m
+CONFIG_PS3_FLASH=m
 CONFIG_PPC_CELL=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
@@ -171,6 +168,7 @@ CONFIG_SPU_BASE=y
 CONFIG_CBE_RAS=y
 CONFIG_CBE_THERM=m
 CONFIG_CBE_CPUFREQ=m
+CONFIG_CBE_CPUFREQ_PMI=m
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
@@ -183,7 +181,7 @@ CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=y
-# CONFIG_PPC_PMI is not set
+CONFIG_PPC_PMI=m
 CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
@@ -206,6 +204,8 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 # CPU Frequency drivers
 #
 # CONFIG_CPM2 is not set
+CONFIG_AXON_RAM=m
+# CONFIG_FSL_ULI1575 is not set
 
 #
 # Kernel options
@@ -248,6 +248,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_PPC_HAS_HASH_64K=y
@@ -268,7 +269,9 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_DEBUG is not set
@@ -359,6 +362,7 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
@@ -377,6 +381,7 @@ CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
 CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
@@ -448,6 +453,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -462,28 +468,12 @@ CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -499,14 +489,11 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
@@ -572,6 +559,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -604,10 +592,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -622,7 +607,6 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -696,10 +680,6 @@ CONFIG_PATA_PDC2027X=m
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_SCC is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -717,6 +697,7 @@ CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_MULTIPATH_EMC is not set
+# CONFIG_DM_MULTIPATH_RDAC is not set
 # CONFIG_DM_DELAY is not set
 
 #
@@ -728,43 +709,30 @@ CONFIG_FUSION=y
 CONFIG_FUSION_SAS=y
 CONFIG_FUSION_MAX_SGE=128
 # CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 CONFIG_BONDING=m
+CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_PCI is not set
@@ -781,11 +749,12 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 CONFIG_SKGE=m
 CONFIG_SKY2=m
-# CONFIG_SK98LIN is not set
+# CONFIG_SKY2_DEBUG is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=y
+CONFIG_GELIC_NET=m
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 CONFIG_NETDEV_10000=y
@@ -824,15 +793,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -925,10 +886,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_HVC_DRIVER=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
-
-#
-# IPMI
-#
 CONFIG_IPMI_HANDLER=m
 # CONFIG_IPMI_PANIC_EVENT is not set
 CONFIG_IPMI_DEVICE_INTERFACE=m
@@ -963,10 +920,6 @@ CONFIG_GEN_RTC=y
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
@@ -1000,6 +953,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
@@ -1011,11 +965,13 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -1026,11 +982,8 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 
 #
@@ -1055,6 +1008,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 
@@ -1068,10 +1022,7 @@ CONFIG_DUMMY_CONSOLE=y
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 
@@ -1085,10 +1036,7 @@ CONFIG_HID=m
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1122,6 +1070,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1199,23 +1148,7 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
@@ -1231,14 +1164,13 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y
 CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 # CONFIG_INFINIBAND_SRP is not set
 # CONFIG_INFINIBAND_ISER is not set
+CONFIG_EDAC=y
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
+# Reporting subsystems
 #
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
 # CONFIG_RTC_CLASS is not set
 
 #
@@ -1255,6 +1187,12 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 #
 
 #
+# Userspace I/O
+#
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1357,7 +1295,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1439,6 +1376,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
@@ -1471,9 +1409,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1504,10 +1443,6 @@ CONFIG_IRQSTACKS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=m
@@ -1546,7 +1481,4 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 2bb1cb911783..d8502e377518 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -299,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs)
 #ifndef CONFIG_FSL_BOOKE
 #define get_mc_reason(regs)	((regs)->dsisr)
 #else
-#define get_mc_reason(regs)	(mfspr(SPRN_MCSR))
+#define get_mc_reason(regs)	(mfspr(SPRN_MCSR) & MCSR_MASK)
 #endif
 #define REASON_FP		ESR_FP
 #define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
@@ -414,8 +414,6 @@ void machine_check_exception(struct pt_regs *regs)
 		printk("Data Cache Push Parity Error\n");
 	if (reason & MCSR_DCPERR)
 		printk("Data Cache Parity Error\n");
-	if (reason & MCSR_GL_CI)
-		printk("Guarded Load or Cache-Inhibited stwcx.\n");
 	if (reason & MCSR_BUS_IAERR)
 		printk("Bus - Instruction Address Error\n");
 	if (reason & MCSR_BUS_RAERR)
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index a73d2d700973..ff1811ac6c81 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -74,6 +74,22 @@ static inline void slb_shadow_clear(unsigned long entry)
 	get_slb_shadow()->save_area[entry].esid = 0;
 }
 
+static inline void create_shadowed_slbe(unsigned long ea, unsigned long flags,
+					unsigned long entry)
+{
+	/*
+	 * Updating the shadow buffer before writing the SLB ensures
+	 * we don't get a stale entry here if we get preempted by PHYP
+	 * between these two statements.
+	 */
+	slb_shadow_update(ea, flags, entry);
+
+	asm volatile("slbmte  %0,%1" :
+		     : "r" (mk_vsid_data(ea, flags)),
+		       "r" (mk_esid_data(ea, entry))
+		     : "memory" );
+}
+
 void slb_flush_and_rebolt(void)
 {
 	/* If you change this make sure you change SLB_NUM_BOLTED
@@ -226,12 +242,16 @@ void slb_initialize(void)
 	vflags = SLB_VSID_KERNEL | vmalloc_llp;
 
 	/* Invalidate the entire SLB (even slot 0) & all the ERATS */
-	slb_shadow_update(PAGE_OFFSET, lflags, 0);
-	asm volatile("isync; slbia; sync; slbmte  %0,%1; isync" ::
-		     "r" (get_slb_shadow()->save_area[0].vsid),
-		     "r" (get_slb_shadow()->save_area[0].esid) : "memory");
-
-	slb_shadow_update(VMALLOC_START, vflags, 1);
-
-	slb_flush_and_rebolt();
+	asm volatile("isync":::"memory");
+	asm volatile("slbmte  %0,%0"::"r" (0) : "memory");
+	asm volatile("isync; slbia; isync":::"memory");
+	create_shadowed_slbe(PAGE_OFFSET, lflags, 0);
+
+	create_shadowed_slbe(VMALLOC_START, vflags, 1);
+
+	/* We don't bolt the stack for the time being - we're in boot,
+	 * so the stack is in the bolted segment.  By the time it goes
+	 * elsewhere, we'll call _switch() which will bolt in the new
+	 * one. */
+	asm volatile("isync":::"memory");
 }
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f58184086c8c..f620171ad6b1 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -33,6 +33,7 @@ config MPC8544_DS
 	bool "Freescale MPC8544 DS"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
+	select FSL_ULI1575
 	help
 	  This option enables support for the MPC8544 DS board
 
diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c
index 4905f6f8903b..0f834d8be444 100644
--- a/arch/powerpc/platforms/85xx/mpc8544_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c
@@ -114,211 +114,25 @@ void __init mpc8544_ds_pic_init(void)
 }
 
 #ifdef CONFIG_PCI
-enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH };
+extern int uses_fsl_uli_m1575;
+extern int uli_exclude_device(struct pci_controller *hose,
+				u_char bus, u_char devfn);
 
-/*
- * Value in  table -- IRQ number
- */
-const unsigned char uli1575_irq_route_table[16] = {
-	0,		/* 0: Reserved */
-	0x8,
-	0,		/* 2: Reserved */
-	0x2,
-	0x4,
-	0x5,
-	0x7,
-	0x6,
-	0,		/* 8: Reserved */
-	0x1,
-	0x3,
-	0x9,
-	0xb,
-	0,		/* 13: Reserved */
-	0xd,
-	0xf,
-};
-
-static int __devinit
-get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
-{
-	struct of_irq oirq;
-	u32 laddr[3];
-	struct device_node *hosenode = hose ? hose->arch_data : NULL;
-
-	if (!hosenode)
-		return -EINVAL;
-
-	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
-	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n",
-	    laddr[0], slot, pin, oirq.specifier[0]);
-	return oirq.specifier[0];
-}
-
-/*8259*/
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-	unsigned short temp;
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	unsigned char irq2pin[16];
-	unsigned long pirq_map_word = 0;
-	u32 irq;
-	int i;
-
-	/*
-	 * ULI1575 interrupts route setup
-	 */
-	memset(irq2pin, 0, 16);	/* Initialize default value 0 */
-
-	irq2pin[6]=PIRQA+3;	/* enabled mapping for IRQ6 to PIRQD, used by SATA */
-
-	/*
-	 * PIRQE -> PIRQF mapping set manually
-	 *
-	 * IRQ pin   IRQ#
-	 * PIRQE ---- 9
-	 * PIRQF ---- 10
-	 * PIRQG ---- 11
-	 * PIRQH ---- 12
-	 */
-	for (i = 0; i < 4; i++)
-		irq2pin[i + 9] = PIRQE + i;
-
-	/* Set IRQ-PIRQ Mapping to ULI1575 */
-	for (i = 0; i < 16; i++)
-		if (irq2pin[i])
-			pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
-			    << ((irq2pin[i] - PIRQA) * 4);
-
-	pirq_map_word |= 1<<26;	/* disable INTx in EP mode*/
-
-	/* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
-	DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
-		(int)pirq_map_word);
-	pci_write_config_dword(dev, 0x48, pirq_map_word);
-
-#define ULI1575_SET_DEV_IRQ(slot, pin, reg)				\
-	do {								\
-		int irq;						\
-		irq = get_pci_irq_from_of(hose, slot, pin);		\
-		if (irq > 0 && irq < 16) 				\
-			pci_write_config_byte(dev, reg, irq2pin[irq]);	\
-		else							\
-			printk(KERN_WARNING "ULI1575 device"		\
-				"(slot %d, pin %d) irq %d is invalid.\n", \
-				slot, pin, irq);			\
-	} while(0)
-
-	/* USB 1.1 OHCI controller 1, slot 28, pin 1 */
-	ULI1575_SET_DEV_IRQ(28, 1, 0x86);
-
-	/* USB 1.1 OHCI controller 2, slot 28, pin 2 */
-	ULI1575_SET_DEV_IRQ(28, 2, 0x87);
-
-	/* USB 1.1 OHCI controller 3, slot 28, pin 3 */
-	ULI1575_SET_DEV_IRQ(28, 3, 0x88);
-
-	/* USB 2.0 controller, slot 28, pin 4 */
-	irq = get_pci_irq_from_of(hose, 28, 4);
-	if (irq >= 0 && irq <= 15)
-		pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
-
-	/* Audio controller, slot 29, pin 1 */
-	ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
-
-	/* Modem controller, slot 29, pin 2 */
-	ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
-
-	/* HD audio controller, slot 29, pin 3 */
-	ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
-
-	/* SMB interrupt: slot 30, pin 1 */
-	ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
-
-	/* PMU ACPI SCI interrupt: slot 30, pin 2 */
-	ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
-
-	/* Serial ATA interrupt: slot 31, pin 1 */
-	ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
-
-	/* Primary PATA IDE IRQ: 14
-	 * Secondary PATA IDE IRQ: 15
-	 */
-	pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
-	pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
-
-	/* Set IRQ14 and IRQ15 to legacy IRQs */
-	pci_read_config_word(dev, 0x46, &temp);
-	temp |= 0xc000;
-	pci_write_config_word(dev, 0x46, temp);
-
-	/* Set i8259 interrupt trigger
-	 * IRQ 3:  Level
-	 * IRQ 4:  Level
-	 * IRQ 5:  Level
-	 * IRQ 6:  Level
-	 * IRQ 7:  Level
-	 * IRQ 9:  Level
-	 * IRQ 10: Level
-	 * IRQ 11: Level
-	 * IRQ 12: Level
-	 * IRQ 14: Edge
-	 * IRQ 15: Edge
-	 */
-	outb(0xfa, 0x4d0);
-	outb(0x1e, 0x4d1);
-
-#undef ULI1575_SET_DEV_IRQ
-}
-
-/* SATA */
-static void __devinit quirk_uli5288(struct pci_dev *dev)
+static int mpc85xx_exclude_device(struct pci_controller *hose,
+				   u_char bus, u_char devfn)
 {
-	unsigned char c;
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c |= 0x80;		/* read/write lock */
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_write_config_byte(dev, 0x09, 0x01);	/* Base class code: storage */
-	pci_write_config_byte(dev, 0x0a, 0x06);	/* IDE disk */
+	struct device_node* node;	
+	struct resource rsrc;
 
-	pci_read_config_byte(dev, 0x83, &c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_read_config_byte(dev, 0x84, &c);
-	c |= 0x01;				/* emulated PATA mode enabled */
-	pci_write_config_byte(dev, 0x84, c);
-}
+	node = (struct device_node *)hose->arch_data;
+	of_address_to_resource(node, 0, &rsrc);
 
-/* PATA */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-	unsigned short temp;
-	pci_write_config_word(dev, 0x04, 0x0405);	/* MEM IO MSI */
-	pci_read_config_word(dev, 0x4a, &temp);
-	temp |= 0x1000;				/* Enable Native IRQ 14/15 */
-	pci_write_config_word(dev, 0x4a, temp);
-}
+	if ((rsrc.start & 0xfffff) == 0xb000) {
+		return uli_exclude_device(hose, bus, devfn);
+	}
 
-/*Bridge*/
-static void __devinit early_uli5249(struct pci_dev *dev)
-{
-	unsigned char temp;
-	pci_write_config_word(dev, 0x04, 0x0007);	/* mem access */
-	pci_read_config_byte(dev, 0x7c, &temp);
-	pci_write_config_byte(dev, 0x7c, 0x80);	/* R/W lock control */
-	pci_write_config_byte(dev, 0x09, 0x01);	/* set as pci-pci bridge */
-	pci_write_config_byte(dev, 0x7c, temp);	/* restore pci bus debug control */
-	dev->class |= 0x1;
+	return PCIBIOS_SUCCESSFUL;
 }
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
 #endif	/* CONFIG_PCI */
 
 /*
@@ -342,6 +156,8 @@ static void __init mpc8544_ds_setup_arch(void)
 		else
 			fsl_add_bridge(np, 0);
 	}
+	uses_fsl_uli_m1575 = 1;
+	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
 	printk("MPC8544 DS board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 343b76d0d793..685b2fbbbe00 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -7,6 +7,7 @@ config MPC8641_HPCN
 	bool "Freescale MPC8641 HPCN"
 	select PPC_I8259
 	select DEFAULT_UIMAGE
+	select FSL_ULI1575
 	help
 	  This option enables support for the MPC8641 HPCN board.
 
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index e9eaa0749ae6..56b27caf7a27 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -107,220 +107,25 @@ mpc86xx_hpcn_init_irq(void)
 }
 
 #ifdef CONFIG_PCI
+extern int uses_fsl_uli_m1575;
+extern int uli_exclude_device(struct pci_controller *hose,
+				u_char bus, u_char devfn);
 
-enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
-const unsigned char uli1575_irq_route_table[16] = {
-	0, 	/* 0: Reserved */
-	0x8, 	/* 1: 0b1000 */
-	0, 	/* 2: Reserved */
-	0x2,	/* 3: 0b0010 */
-	0x4,	/* 4: 0b0100 */
-	0x5, 	/* 5: 0b0101 */
-	0x7,	/* 6: 0b0111 */
-	0x6,	/* 7: 0b0110 */
-	0, 	/* 8: Reserved */
-	0x1,	/* 9: 0b0001 */
-	0x3,	/* 10: 0b0011 */
-	0x9,	/* 11: 0b1001 */
-	0xb,	/* 12: 0b1011 */
-	0, 	/* 13: Reserved */
-	0xd,	/* 14, 0b1101 */
-	0xf,	/* 15, 0b1111 */
-};
-
-static int __devinit
-get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
-{
-	struct of_irq oirq;
-	u32 laddr[3];
-	struct device_node *hosenode = hose ? hose->arch_data : NULL;
-
-	if (!hosenode) return -EINVAL;
-
-	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
-	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
-			laddr[0], slot, pin, oirq.specifier[0]);
-	return oirq.specifier[0];
-}
-
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-	unsigned short temp;
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	unsigned char irq2pin[16], c;
-	unsigned long pirq_map_word = 0;
-	u32 irq;
-	int i;
-
-	/*
-	 * ULI1575 interrupts route setup
-	 */
-	memset(irq2pin, 0, 16); /* Initialize default value 0 */
-
-	/*
-	 * PIRQA -> PIRQD mapping read from OF-tree
-	 *
-	 * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
-	 *                PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
-	 */
-	for (i = 0; i < 4; i++){
-		irq = get_pci_irq_from_of(hose, 17, i + 1);
-		if (irq > 0 && irq < 16)
-			irq2pin[irq] = PIRQA + i;
-		else
-			printk(KERN_WARNING "ULI1575 device"
-			    "(slot %d, pin %d) irq %d is invalid.\n",
-			    17, i, irq);
-	}
-
-	/*
-	 * PIRQE -> PIRQF mapping set manually
-	 *
-	 * IRQ pin   IRQ#
-	 * PIRQE ---- 9
-	 * PIRQF ---- 10
-	 * PIRQG ---- 11
-	 * PIRQH ---- 12
-	 */
-	for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i;
-
-	/* Set IRQ-PIRQ Mapping to ULI1575 */
-	for (i = 0; i < 16; i++)
-		if (irq2pin[i])
-			pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
-				<< ((irq2pin[i] - PIRQA) * 4);
-
-	/* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
-	DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
-			pirq_map_word);
-	pci_write_config_dword(dev, 0x48, pirq_map_word);
-
-#define ULI1575_SET_DEV_IRQ(slot, pin, reg) 				\
-	do { 								\
-		int irq; 						\
-		irq = get_pci_irq_from_of(hose, slot, pin); 		\
-		if (irq > 0 && irq < 16) 				\
-			pci_write_config_byte(dev, reg, irq2pin[irq]); 	\
-		else							\
-			printk(KERN_WARNING "ULI1575 device"		\
-			    "(slot %d, pin %d) irq %d is invalid.\n",	\
-			    slot, pin, irq);				\
-	} while(0)
-
-	/* USB 1.1 OHCI controller 1, slot 28, pin 1 */
-	ULI1575_SET_DEV_IRQ(28, 1, 0x86);
-
-	/* USB 1.1 OHCI controller 2, slot 28, pin 2 */
-	ULI1575_SET_DEV_IRQ(28, 2, 0x87);
-
-	/* USB 1.1 OHCI controller 3, slot 28, pin 3 */
-	ULI1575_SET_DEV_IRQ(28, 3, 0x88);
-
-	/* USB 2.0 controller, slot 28, pin 4 */
-	irq = get_pci_irq_from_of(hose, 28, 4);
-	if (irq >= 0 && irq <=15)
-		pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
-
-	/* Audio controller, slot 29, pin 1 */
-	ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
-
-	/* Modem controller, slot 29, pin 2 */
-	ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
-
-	/* HD audio controller, slot 29, pin 3 */
-	ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
-
-	/* SMB interrupt: slot 30, pin 1 */
-	ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
-
-	/* PMU ACPI SCI interrupt: slot 30, pin 2 */
-	ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
-
-	/* Serial ATA interrupt: slot 31, pin 1 */
-	ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
-
-	/* Primary PATA IDE IRQ: 14
-	 * Secondary PATA IDE IRQ: 15
-	 */
-	pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
-	pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
-
-	/* Set IRQ14 and IRQ15 to legacy IRQs */
-	pci_read_config_word(dev, 0x46, &temp);
-	temp |= 0xc000;
-	pci_write_config_word(dev, 0x46, temp);
-
-	/* Set i8259 interrupt trigger
-	 * IRQ 3:  Level
-	 * IRQ 4:  Level
-	 * IRQ 5:  Level
-	 * IRQ 6:  Level
-	 * IRQ 7:  Level
-	 * IRQ 9:  Level
-	 * IRQ 10: Level
-	 * IRQ 11: Level
-	 * IRQ 12: Level
-	 * IRQ 14: Edge
-	 * IRQ 15: Edge
-	 */
-	outb(0xfa, 0x4d0);
-	outb(0x1e, 0x4d1);
-
-#undef ULI1575_SET_DEV_IRQ
-
-	/* Disable the HD interface and enable the AC97 interface. */
-	pci_read_config_byte(dev, 0xb8, &c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0xb8, c);
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
+static int mpc86xx_exclude_device(struct pci_controller *hose,
+				   u_char bus, u_char devfn)
 {
-	unsigned char c;
+	struct device_node* node;	
+	struct resource rsrc;
 
-	pci_read_config_byte(dev,0x83,&c);
-	c |= 0x80;
-	pci_write_config_byte(dev, 0x83, c);
+	node = (struct device_node *)hose->arch_data;
+	of_address_to_resource(node, 0, &rsrc);
 
-	pci_write_config_byte(dev, 0x09, 0x01);
-	pci_write_config_byte(dev, 0x0a, 0x06);
-
-	pci_read_config_byte(dev,0x83,&c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_read_config_byte(dev,0x84,&c);
-	c |= 0x01;
-	pci_write_config_byte(dev, 0x84, c);
-}
-
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-	unsigned short temp;
-	pci_write_config_word(dev, 0x04, 0x0405);
-	dev->class &= ~0x5;
-	pci_read_config_word(dev, 0x4a, &temp);
-	temp |= 0x1000;
-	pci_write_config_word(dev, 0x4a, temp);
-}
+	if ((rsrc.start & 0xfffff) == 0x8000) {
+		return uli_exclude_device(hose, bus, devfn);
+	}
 
-static void __devinit early_uli5249(struct pci_dev *dev)
-{
-	unsigned char temp;
-	pci_write_config_word(dev, 0x04, 0x0007);
-	pci_read_config_byte(dev, 0x7c, &temp);
-	pci_write_config_byte(dev, 0x7c, 0x80);
-	pci_write_config_byte(dev, 0x09, 0x01);
-	pci_write_config_byte(dev, 0x7c, temp);
-	dev->class |= 0x1;
+	return PCIBIOS_SUCCESSFUL;
 }
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
 #endif /* CONFIG_PCI */
 
 
@@ -353,6 +158,9 @@ mpc86xx_hpcn_setup_arch(void)
 		else
 			fsl_add_bridge(np, 0);
 	}
+	uses_fsl_uli_m1575 = 1;
+	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
+
 #endif
 
 	printk("MPC86xx HPCN board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 2c937fb207fe..041df77ec117 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -283,4 +283,12 @@ config AXON_RAM
 	  minor numbers are available in /proc/devices, /proc/partitions or
 	  in /sys/block/axonram?/dev.
 
+config FSL_ULI1575
+	bool
+	default n
+	help
+	  Supports for the ULI1575 PCIe south bridge that exists on some
+	  Freescale reference boards. The boards all use the ULI in pretty
+	  much the same way.
+
 endmenu
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index d6e041a46d25..d44e832b01f2 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,3 +1,6 @@
+
+obj-$(CONFIG_FSL_ULI1575)	+= fsl_uli1575.o
+
 ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
 else
diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h
index 17d597144877..b24025f2ac7a 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.h
+++ b/arch/powerpc/platforms/cell/cbe_regs.h
@@ -113,10 +113,14 @@ struct cbe_pmd_regs {
 	u64	checkstop_fir;					/* 0x0c00 */
 	u64	recoverable_fir;				/* 0x0c08 */
 	u64	spec_att_mchk_fir;				/* 0x0c10 */
-	u64	fir_mode_reg;					/* 0x0c18 */
+	u32	fir_mode_reg;					/* 0x0c18 */
+	u8	pad_0x0c1c_0x0c20 [4];				/* 0x0c1c */
+#define CBE_PMD_FIR_MODE_M8		0x00800
 	u64	fir_enable_mask;				/* 0x0c20 */
 
-	u8	pad_0x0c28_0x1000 [0x1000 - 0x0c28];		/* 0x0c28 */
+	u8	pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];		/* 0x0c28 */
+	u64	ras_esc_0;					/* 0x0ca8 */
+	u8	pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];		/* 0x0cb0 */
 };
 
 extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index e4132f8f51b3..fb5eda48467d 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -88,17 +88,13 @@ static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
 /* returns the value for a given spu in a given register */
 static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg)
 {
-	const unsigned int *id;
 	union spe_reg value;
 	struct spu *spu;
 
-	/* getting the id from the reg attribute will not work on future device-tree layouts
-	 * in future we should store the id to the spu struct and use it here */
 	spu = container_of(sysdev, struct spu, sysdev);
-	id = of_get_property(spu_devnode(spu), "reg", NULL);
 	value.val = in_be64(&reg->val);
 
-	return value.spe[*id];
+	return value.spe[spu->spe_id];
 }
 
 static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 812bf563ed65..4ede22d363fa 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -38,6 +38,8 @@
 #include "pervasive.h"
 #include "cbe_regs.h"
 
+static int sysreset_hack;
+
 static void cbe_power_save(void)
 {
 	unsigned long ctrl, thread_switch_control;
@@ -85,6 +87,9 @@ static void cbe_power_save(void)
 
 static int cbe_system_reset_exception(struct pt_regs *regs)
 {
+	int cpu;
+	struct cbe_pmd_regs __iomem *pmd;
+
 	switch (regs->msr & SRR1_WAKEMASK) {
 	case SRR1_WAKEEE:
 		do_IRQ(regs);
@@ -93,6 +98,18 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 		timer_interrupt(regs);
 		break;
 	case SRR1_WAKEMT:
+		/*
+		 * The BMC can inject user triggered system reset exceptions,
+		 * but cannot set the system reset reason in srr1,
+		 * so check an extra register here.
+		 */
+		if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
+			pmd = cbe_get_cpu_pmd_regs(cpu);
+			if (in_be64(&pmd->ras_esc_0) & 0xffff) {
+				out_be64(&pmd->ras_esc_0, 0);
+				return 0;
+			}
+		}
 		break;
 #ifdef CONFIG_CBE_RAS
 	case SRR1_WAKESYSERR:
@@ -113,9 +130,12 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 void __init cbe_pervasive_init(void)
 {
 	int cpu;
+
 	if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
 		return;
 
+	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+
 	for_each_possible_cpu(cpu) {
 		struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
 		if (!regs)
@@ -124,6 +144,12 @@ void __init cbe_pervasive_init(void)
 		 /* Enable Pause(0) control bit */
 		out_be64(&regs->pmcr, in_be64(&regs->pmcr) |
 					    CBE_PMD_PAUSE_ZERO_CONTROL);
+
+		/* Enable JTAG system-reset hack */
+		if (sysreset_hack)
+			out_be32(&regs->fir_mode_reg,
+				in_be32(&regs->fir_mode_reg) |
+				CBE_PMD_FIR_MODE_M8);
 	}
 
 	ppc_md.power_save = cbe_power_save;
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 5eb88346181a..7c0668a9dcc7 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -48,7 +48,7 @@ static u64 __init find_spu_unit_number(struct device_node *spe)
 {
 	const unsigned int *prop;
 	int proplen;
-	prop = of_get_property(spe, "unit-id", &proplen);
+	prop = of_get_property(spe, "physical-id", &proplen);
 	if (proplen == 4)
 		return (u64)*prop;
 
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
new file mode 100644
index 000000000000..afc9141be63e
--- /dev/null
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -0,0 +1,255 @@
+/*
+ * ULI M1575 setup code - specific to Freescale boards
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+
+#define ULI_PIRQA	0x08
+#define ULI_PIRQB	0x09
+#define ULI_PIRQC	0x0a
+#define ULI_PIRQD	0x0b
+#define ULI_PIRQE	0x0c
+#define ULI_PIRQF	0x0d
+#define ULI_PIRQG	0x0e
+
+#define ULI_8259_NONE	0x00
+#define ULI_8259_IRQ1	0x08
+#define ULI_8259_IRQ3	0x02
+#define ULI_8259_IRQ4	0x04
+#define ULI_8259_IRQ5	0x05
+#define ULI_8259_IRQ6	0x07
+#define ULI_8259_IRQ7	0x06
+#define ULI_8259_IRQ9	0x01
+#define ULI_8259_IRQ10	0x03
+#define ULI_8259_IRQ11	0x09
+#define ULI_8259_IRQ12	0x0b
+#define ULI_8259_IRQ14	0x0d
+#define ULI_8259_IRQ15	0x0f
+
+u8 uli_pirq_to_irq[8] = {
+	ULI_8259_IRQ9,		/* PIRQA */
+	ULI_8259_IRQ10,		/* PIRQB */
+	ULI_8259_IRQ11,		/* PIRQC */
+	ULI_8259_IRQ12,		/* PIRQD */
+	ULI_8259_IRQ5,		/* PIRQE */
+	ULI_8259_IRQ6,		/* PIRQF */
+	ULI_8259_IRQ7,		/* PIRQG */
+	ULI_8259_NONE,		/* PIRQH */
+};
+
+/* set in board code if you want this quirks to do something */
+int uses_fsl_uli_m1575;
+
+/* Bridge */
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+	unsigned char temp;
+
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
+		 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	/* read/write lock */
+	pci_read_config_byte(dev, 0x7c, &temp);
+	pci_write_config_byte(dev, 0x7c, 0x80);
+
+	/* set as P2P bridge */
+	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+	dev->class |= 0x1;
+
+	/* restore lock */
+	pci_write_config_byte(dev, 0x7c, temp);
+}
+
+
+static void __devinit quirk_uli1575(struct pci_dev *dev)
+{
+	int i;
+
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	/*
+	 * ULI1575 interrupts route setup
+	 */
+
+	/* ULI1575 IRQ mapping conf register maps PIRQx to IRQn */
+	for (i = 0; i < 4; i++) {
+		u8 val = uli_pirq_to_irq[i*2] | (uli_pirq_to_irq[i*2+1] << 4);
+		pci_write_config_byte(dev, 0x48 + i, val);
+	}
+
+	/* USB 1.1 OHCI controller 1: dev 28, func 0 - IRQ12 */
+	pci_write_config_byte(dev, 0x86, ULI_PIRQD);
+
+	/* USB 1.1 OHCI controller 2: dev 28, func 1 - IRQ9 */
+	pci_write_config_byte(dev, 0x87, ULI_PIRQA);
+
+	/* USB 1.1 OHCI controller 3: dev 28, func 2 - IRQ10 */
+	pci_write_config_byte(dev, 0x88, ULI_PIRQB);
+
+	/* Lan controller: dev 27, func 0 - IRQ6 */
+	pci_write_config_byte(dev, 0x89, ULI_PIRQF);
+
+	/* AC97 Audio controller: dev 29, func 0 - IRQ6 */
+	pci_write_config_byte(dev, 0x8a, ULI_PIRQF);
+
+	/* Modem controller: dev 29, func 1 - IRQ6 */
+	pci_write_config_byte(dev, 0x8b, ULI_PIRQF);
+
+	/* HD Audio controller: dev 29, func 2 - IRQ6 */
+	pci_write_config_byte(dev, 0x8c, ULI_PIRQF);
+
+	/* SATA controller: dev 31, func 1 - IRQ5 */
+	pci_write_config_byte(dev, 0x8d, ULI_PIRQE);
+
+	/* SMB interrupt: dev 30, func 1 - IRQ7 */
+	pci_write_config_byte(dev, 0x8e, ULI_PIRQG);
+
+	/* PMU ACPI SCI interrupt: dev 30, func 2 - IRQ7 */
+	pci_write_config_byte(dev, 0x8f, ULI_PIRQG);
+
+	/* USB 2.0 controller: dev 28, func 3 */
+	pci_write_config_byte(dev, 0x74, ULI_8259_IRQ11);
+
+	/* Primary PATA IDE IRQ: 14
+	 * Secondary PATA IDE IRQ: 15
+	 */
+	pci_write_config_byte(dev, 0x44, 0x30 | ULI_8259_IRQ14);
+	pci_write_config_byte(dev, 0x75, ULI_8259_IRQ15);
+}
+
+static void __devinit quirk_final_uli1575(struct pci_dev *dev)
+{
+	/* Set i8259 interrupt trigger
+	 * IRQ 3:  Level
+	 * IRQ 4:  Level
+	 * IRQ 5:  Level
+	 * IRQ 6:  Level
+	 * IRQ 7:  Level
+	 * IRQ 9:  Level
+	 * IRQ 10: Level
+	 * IRQ 11: Level
+	 * IRQ 12: Level
+	 * IRQ 14: Edge
+	 * IRQ 15: Edge
+	 */
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	outb(0xfa, 0x4d0);
+	outb(0x1e, 0x4d1);
+
+	/* setup RTC */
+	CMOS_WRITE(RTC_SET, RTC_CONTROL);
+	CMOS_WRITE(RTC_24H, RTC_CONTROL);
+
+	/* ensure month, date, and week alarm fields are ignored */
+	CMOS_WRITE(0, RTC_VALID);
+
+	outb_p(0x7c, 0x72);
+	outb_p(RTC_ALARM_DONT_CARE, 0x73);
+
+	outb_p(0x7d, 0x72);
+	outb_p(RTC_ALARM_DONT_CARE, 0x73);
+}
+
+/* SATA */
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+	unsigned int d;
+
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	/* read/write lock */
+	pci_read_config_byte(dev, 0x83, &c);
+	pci_write_config_byte(dev, 0x83, c|0x80);
+
+	pci_read_config_dword(dev, PCI_CLASS_REVISION, &d);
+	d = (d & 0xff) | (PCI_CLASS_STORAGE_SATA_AHCI << 8);
+	pci_write_config_dword(dev, PCI_CLASS_REVISION, d);
+
+	/* restore lock */
+	pci_write_config_byte(dev, 0x83, c);
+
+	/* disable emulated PATA mode enabled */
+	pci_read_config_byte(dev, 0x84, &c);
+	pci_write_config_byte(dev, 0x84, c & ~0x01);
+}
+
+/* PATA */
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned short temp;
+
+	if (!uses_fsl_uli_m1575)
+		return;
+
+	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
+		PCI_COMMAND_MASTER | PCI_COMMAND_IO);
+
+	/* Enable Native IRQ 14/15 */
+	pci_read_config_word(dev, 0x4a, &temp);
+	pci_write_config_word(dev, 0x4a, temp | 0x1000);
+}
+
+/* We have to do a dummy read on the P2P for the RTC to work, WTF */
+static void __devinit quirk_final_uli5249(struct pci_dev *dev)
+{
+	int i;
+	u8 *dummy;
+	struct pci_bus *bus = dev->bus;
+
+	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+		if ((bus->resource[i]) &&
+			(bus->resource[i]->flags & IORESOURCE_MEM)) {
+			dummy = ioremap(bus->resource[i]->start, 0x4);
+			if (dummy) {
+				in_8(dummy);
+				iounmap(dummy);
+			}
+			break;
+		}
+	}
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+
+int uli_exclude_device(struct pci_controller *hose,
+			u_char bus, u_char devfn)
+{
+	if (bus == (hose->first_busno + 2)) {
+		/* exclude Modem controller */
+		if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+
+		/* exclude HD Audio controller */
+		if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 2))
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index c910ec9c2bdf..6c42787fb382 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -93,7 +93,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
 
 	pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr);
 
-	bus_addr = (tbl->it_offset + index) << PAGE_SHIFT;
+	bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
 
 	ip = ((u32 *)tbl->it_base) + index;
 
@@ -118,7 +118,7 @@ static void iobmap_free(struct iommu_table *tbl, long index,
 
 	pr_debug("iobmap: free at: %lx, %lx\n", index, npages);
 
-	bus_addr = (tbl->it_offset + index) << PAGE_SHIFT;
+	bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
 
 	ip = ((u32 *)tbl->it_base) + index;
 
@@ -137,7 +137,7 @@ static void iommu_table_iobmap_setup(void)
 	iommu_table_iobmap.it_busno = 0;
 	iommu_table_iobmap.it_offset = 0;
 	/* it_size is in number of entries */
-	iommu_table_iobmap.it_size = 0x80000000 >> PAGE_SHIFT;
+	iommu_table_iobmap.it_size = 0x80000000 >> IOBMAP_PAGE_SHIFT;
 
 	/* Initialize the common IOMMU code */
 	iommu_table_iobmap.it_base = (unsigned long)iob_l2_base;
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 2326d5dc5752..ab037a3a40db 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -59,8 +59,7 @@
 struct axon_ram_bank {
 	struct of_device	*device;
 	struct gendisk		*disk;
-	unsigned int		irq_correctable;
-	unsigned int		irq_uncorrectable;
+	unsigned int		irq_id;
 	unsigned long		ph_addr;
 	unsigned long		io_addr;
 	unsigned long		size;
@@ -93,16 +92,9 @@ axon_ram_irq_handler(int irq, void *dev)
 
 	BUG_ON(!bank);
 
-	if (irq == bank->irq_correctable) {
-		dev_err(&device->dev, "Correctable memory error occured\n");
-		bank->ecc_counter++;
-		return IRQ_HANDLED;
-	} else if (irq == bank->irq_uncorrectable) {
-		dev_err(&device->dev, "Uncorrectable memory error occured\n");
-		panic("Critical ECC error on %s", device->node->full_name);
-	}
-
-	return IRQ_NONE;
+	dev_err(&device->dev, "Correctable memory error occured\n");
+	bank->ecc_counter++;
+	return IRQ_HANDLED;
 }
 
 /**
@@ -259,28 +251,18 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 	blk_queue_hardsect_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE);
 	add_disk(bank->disk);
 
-	bank->irq_correctable = irq_of_parse_and_map(device->node, 0);
-	bank->irq_uncorrectable = irq_of_parse_and_map(device->node, 1);
-	if ((bank->irq_correctable <= 0) || (bank->irq_uncorrectable <= 0)) {
+	bank->irq_id = irq_of_parse_and_map(device->node, 0);
+	if (bank->irq_id == NO_IRQ) {
 		dev_err(&device->dev, "Cannot access ECC interrupt ID\n");
 		rc = -EFAULT;
 		goto failed;
 	}
 
-	rc = request_irq(bank->irq_correctable, axon_ram_irq_handler,
-			AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device);
-	if (rc != 0) {
-		dev_err(&device->dev, "Cannot register ECC interrupt handler\n");
-		bank->irq_correctable = bank->irq_uncorrectable = 0;
-		rc = -EFAULT;
-		goto failed;
-	}
-
-	rc = request_irq(bank->irq_uncorrectable, axon_ram_irq_handler,
+	rc = request_irq(bank->irq_id, axon_ram_irq_handler,
 			AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device);
 	if (rc != 0) {
 		dev_err(&device->dev, "Cannot register ECC interrupt handler\n");
-		bank->irq_uncorrectable = 0;
+		bank->irq_id = NO_IRQ;
 		rc = -EFAULT;
 		goto failed;
 	}
@@ -296,13 +278,9 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 
 failed:
 	if (bank != NULL) {
-		if (bank->irq_uncorrectable > 0)
-			free_irq(bank->irq_uncorrectable, device);
-		if (bank->irq_correctable > 0)
-			free_irq(bank->irq_correctable, device);
+		if (bank->irq_id != NO_IRQ)
+			free_irq(bank->irq_id, device);
 		if (bank->disk != NULL) {
-			if (bank->disk->queue != NULL)
-				blk_cleanup_queue(bank->disk->queue);
 			if (bank->disk->major > 0)
 				unregister_blkdev(bank->disk->major,
 						bank->disk->disk_name);
@@ -329,9 +307,7 @@ axon_ram_remove(struct of_device *device)
 	BUG_ON(!bank || !bank->disk);
 
 	device_remove_file(&device->dev, &dev_attr_ecc);
-	free_irq(bank->irq_uncorrectable, device);
-	free_irq(bank->irq_correctable, device);
-	blk_cleanup_queue(bank->disk->queue);
+	free_irq(bank->irq_id, device);
 	unregister_blkdev(bank->disk->major, bank->disk->disk_name);
 	del_gendisk(bank->disk);
 	iounmap((void __iomem *) bank->io_addr);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 9fb0ce5c7176..114c90f8f560 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -251,6 +251,8 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transpare
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent);
 DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 565f57d777fe..f3abce11bead 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/fsl_devices.h>
 #include <linux/fs_enet_pd.h>
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index e276048b8c5f..0c9ac7ee08fb 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -20,14 +20,16 @@ static int  __init add_rtc(void)
 {
 	struct device_node *np;
 	struct platform_device *pd;
-	struct resource res;
+	struct resource res[2];
 	int ret;
 
+	memset(&res, 0, sizeof(res));
+
 	np = of_find_compatible_node(NULL, NULL, "pnpPNP,b00");
 	if (!np)
 		return -ENODEV;
 
-	ret = of_address_to_resource(np, 0, &res);
+	ret = of_address_to_resource(np, 0, &res[0]);
 	of_node_put(np);
 	if (ret)
 		return ret;
@@ -36,11 +38,18 @@ static int  __init add_rtc(void)
 	 * RTC_PORT(x) is hardcoded in asm/mc146818rtc.h.  Verify that the
 	 * address provided by the device node matches.
 	 */
-	if (res.start != RTC_PORT(0))
+	if (res[0].start != RTC_PORT(0))
 		return -EINVAL;
 
+	/* Use a fixed interrupt value of 8 since on PPC if we are using this
+	 * its off an i8259 which we ensure has interrupt numbers 0..15. */
+	res[1].start = 8;
+	res[1].end = 8;
+	res[1].flags = IORESOURCE_IRQ;
+
 	pd = platform_device_register_simple("rtc_cmos", -1,
-					     &res, 1);
+					     &res[0], 2);
+
 	if (IS_ERR(pd))
 		return PTR_ERR(pd);