[PATCH] powerpc: move rtas_fw.c out of platforms/pseries

Cell uses the same code as pSeries for flashing the firmware
through rtas, so the implementation should not be part of
platforms/pseries.

Put it into arch/powerpc/kernel instead.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

3 files changed, 1 insertions, 142 deletions

diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 5ef494e3a70f..91909a844736 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -1,5 +1,5 @@
 obj-y			:= pci.o lpar.o hvCall.o nvram.o reconfig.o \
-			   setup.o iommu.o rtas-fw.o ras.o
+			   setup.o iommu.o ras.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_IBMVIO)	+= vio.o
 obj-$(CONFIG_XICS)	+= xics.o
diff --git a/arch/powerpc/platforms/pseries/rtas-fw.c b/arch/powerpc/platforms/pseries/rtas-fw.c
deleted file mode 100644
index 15d81d758ca0..000000000000
--- a/arch/powerpc/platforms/pseries/rtas-fw.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- *
- * Procedures for firmware flash updates on pSeries systems.
- *
- * Peter Bergner, IBM	March 2001.
- * Copyright (C) 2001 IBM.
- *
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#include <stdarg.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/prom.h>
-#include <asm/rtas.h>
-#include <asm/semaphore.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/param.h>
-#include <asm/system.h>
-#include <asm/abs_addr.h>
-#include <asm/udbg.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-#include <asm/systemcfg.h>
-
-#include "rtas-fw.h"
-
-struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
-
-#define FLASH_BLOCK_LIST_VERSION (1UL)
-
-static void rtas_flash_firmware(void)
-{
-	unsigned long image_size;
-	struct flash_block_list *f, *next, *flist;
-	unsigned long rtas_block_list;
-	int i, status, update_token;
-
-	update_token = rtas_token("ibm,update-flash-64-and-reboot");
-	if (update_token == RTAS_UNKNOWN_SERVICE) {
-		printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n");
-		printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
-		return;
-	}
-
-	/* NOTE: the "first" block list is a global var with no data
-	 * blocks in the kernel data segment.  We do this because
-	 * we want to ensure this block_list addr is under 4GB.
-	 */
-	rtas_firmware_flash_list.num_blocks = 0;
-	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
-	rtas_block_list = virt_to_abs(flist);
-	if (rtas_block_list >= 4UL*1024*1024*1024) {
-		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
-		return;
-	}
-
-	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
-	/* Update the block_list in place. */
-	image_size = 0;
-	for (f = flist; f; f = next) {
-		/* Translate data addrs to absolute */
-		for (i = 0; i < f->num_blocks; i++) {
-			f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
-			image_size += f->blocks[i].length;
-		}
-		next = f->next;
-		/* Don't translate NULL pointer for last entry */
-		if (f->next)
-			f->next = (struct flash_block_list *)virt_to_abs(f->next);
-		else
-			f->next = NULL;
-		/* make num_blocks into the version/length field */
-		f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
-	}
-
-	printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
-	printk(KERN_ALERT "FLASH: performing flash and reboot\n");
-	rtas_progress("Flashing        \n", 0x0);
-	rtas_progress("Please Wait...  ", 0x0);
-	printk(KERN_ALERT "FLASH: this will take several minutes.  Do not power off!\n");
-	status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
-	switch (status) {	/* should only get "bad" status */
-	    case 0:
-		printk(KERN_ALERT "FLASH: success\n");
-		break;
-	    case -1:
-		printk(KERN_ALERT "FLASH: hardware error.  Firmware may not be not flashed\n");
-		break;
-	    case -3:
-		printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform.  Firmware not flashed\n");
-		break;
-	    case -4:
-		printk(KERN_ALERT "FLASH: flash failed when partially complete.  System may not reboot\n");
-		break;
-	    default:
-		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
-		break;
-	}
-}
-
-void rtas_flash_bypass_warning(void)
-{
-	printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
-	printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
-}
-
-
-void rtas_fw_restart(char *cmd)
-{
-	if (rtas_firmware_flash_list.next)
-		rtas_flash_firmware();
-	rtas_restart(cmd);
-}
-
-void rtas_fw_power_off(void)
-{
-	if (rtas_firmware_flash_list.next)
-		rtas_flash_bypass_warning();
-	rtas_power_off();
-}
-
-void rtas_fw_halt(void)
-{
-	if (rtas_firmware_flash_list.next)
-		rtas_flash_bypass_warning();
-	rtas_halt();
-}
-
-EXPORT_SYMBOL(rtas_firmware_flash_list);
diff --git a/arch/powerpc/platforms/pseries/rtas-fw.h b/arch/powerpc/platforms/pseries/rtas-fw.h
deleted file mode 100644
index e70fa69974a3..000000000000
--- a/arch/powerpc/platforms/pseries/rtas-fw.h
+++ /dev/null
@@ -1,3 +0,0 @@
-void rtas_fw_restart(char *cmd);
-void rtas_fw_power_off(void);
-void rtas_fw_halt(void);