summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
diff options
context:
space:
mode:
authorOlof Johansson <olof@lixom.net>2007-10-03 13:03:54 -0500
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 16:54:30 -0700
commitaf289e803fdf2fcd19cf4a57c3c896dba146c756 (patch)
tree038fe6e9a32ed958450bf0bd33227a3c23342ae8 /arch/powerpc/platforms
parent9ddf7774b9d760dc3fa4d5ae7d7fd92d4c02150b (diff)
pasemi_mac: enable iommu support
pasemi_mac: enable iommu support Enable IOMMU support for pasemi_mac, but avoid using it on non-partitioned systems for performance reasons. The user can override this by selecting the PPC_PASEMI_IOMMU_DMA_FORCE configuration option. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'arch/powerpc/platforms')
-rw-r--r--arch/powerpc/platforms/pasemi/Kconfig10
-rw-r--r--arch/powerpc/platforms/pasemi/iommu.c15
2 files changed, 20 insertions, 5 deletions
diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig
index 95cd90fd81c7..e95261ef6f98 100644
--- a/arch/powerpc/platforms/pasemi/Kconfig
+++ b/arch/powerpc/platforms/pasemi/Kconfig
@@ -18,6 +18,16 @@ config PPC_PASEMI_IOMMU
help
IOMMU support for PA6T-1682M
+config PPC_PASEMI_IOMMU_DMA_FORCE
+ bool "Force DMA engine to use IOMMU"
+ depends on PPC_PASEMI_IOMMU
+ help
+ This option forces the use of the IOMMU also for the
+ DMA engine. Otherwise the kernel will use it only when
+ running under a hypervisor.
+
+ If in doubt, say "N".
+
config PPC_PASEMI_MDIO
depends on PHYLIB
tristate "MDIO support via GPIO"
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 9014d55c717b..a1111b5c6cb4 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -25,6 +25,7 @@
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/abs_addr.h>
+#include <asm/firmware.h>
#define IOBMAP_PAGE_SHIFT 12
@@ -175,13 +176,17 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev)
{
pr_debug("pci_dma_dev_setup, dev %p (%s)\n", dev, pci_name(dev));
- /* DMA device is untranslated, but all other PCI-e goes through
- * the IOMMU
+#if !defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
+ /* For non-LPAR environment, don't translate anything for the DMA
+ * engine. The exception to this is if the user has enabled
+ * CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE at build time.
*/
- if (dev->vendor == 0x1959 && dev->device == 0xa007)
+ if (dev->vendor == 0x1959 && dev->device == 0xa007 &&
+ !firmware_has_feature(FW_FEATURE_LPAR))
dev->dev.archdata.dma_ops = &dma_direct_ops;
- else
- dev->dev.archdata.dma_data = &iommu_table_iobmap;
+#endif
+
+ dev->dev.archdata.dma_data = &iommu_table_iobmap;
}
static void pci_dma_bus_setup_null(struct pci_bus *b) { }