summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot/dts/mpc836x_mds.dts
diff options
context:
space:
mode:
authorMathieu Malaterre <malat@debian.org>2017-12-14 17:54:00 +0100
committerMichael Ellerman <mpe@ellerman.id.au>2018-01-21 23:37:45 +1100
commit600ecc1936be075f611f299755e2de90b205eb82 (patch)
tree32ba6cfe6a1aa8a5d2f9fa6d66e9443c1b0aefa0 /arch/powerpc/boot/dts/mpc836x_mds.dts
parent00f7b29f6e9b8ab900b1de19e72c457fd6702ccb (diff)
powerpc/boot/dts: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diffstat (limited to 'arch/powerpc/boot/dts/mpc836x_mds.dts')
-rw-r--r--arch/powerpc/boot/dts/mpc836x_mds.dts8
1 files changed, 4 insertions, 4 deletions
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index ecb6ccd3a6aa..539fd9f72eda 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -228,7 +228,7 @@
gpio-controller;
};
- pio1: ucc_pin@01 {
+ pio1: ucc_pin@1 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 3 1 0 1 0 /* TxD0 */
@@ -255,7 +255,7 @@
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0>; /* GTX125 - CLK9 */
};
- pio2: ucc_pin@02 {
+ pio2: ucc_pin@2 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 17 1 0 1 0 /* TxD0 */
@@ -393,12 +393,12 @@
reg = <0x2120 0x18>;
compatible = "fsl,ucc-mdio";
- phy0: ethernet-phy@00 {
+ phy0: ethernet-phy@0 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x0>;
};
- phy1: ethernet-phy@01 {
+ phy1: ethernet-phy@1 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x1>;