mn10300: add the MN10300/AM33 architecture to the kernel

Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 299 insertions, 0 deletions

diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
new file mode 100644
index 000000000000..c5451592d403
--- /dev/null
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -0,0 +1,299 @@
+/* MN10300 On-chip serial driver for gdbstub I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/gdb-stub.h>
+#include <asm/exceptions.h>
+#include <asm/unit/clock.h>
+#include "mn10300-serial.h"
+
+#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif0;
+#elif defined(CONFIG_GDBSTUB_ON_TTYSM1)
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif1;
+#else
+struct mn10300_serial_port *const gdbstub_port = &mn10300_serial_port_sif2;
+#endif
+
+
+/*
+ * initialise the GDB stub I/O routines
+ */
+void __init gdbstub_io_init(void)
+{
+	uint16_t scxctr;
+	int tmp;
+
+	switch (gdbstub_port->clock_src) {
+	case MNSCx_CLOCK_SRC_IOCLK:
+		gdbstub_port->ioclk = MN10300_IOCLK;
+		break;
+
+#ifdef MN10300_IOBCLK
+	case MNSCx_CLOCK_SRC_IOBCLK:
+		gdbstub_port->ioclk = MN10300_IOBCLK;
+		break;
+#endif
+	default:
+		BUG();
+	}
+
+	/* set up the serial port */
+	gdbstub_io_set_baud(115200);
+
+	/* we want to get serial receive interrupts */
+	set_intr_level(gdbstub_port->rx_irq, GxICR_LEVEL_0);
+	set_intr_level(gdbstub_port->tx_irq, GxICR_LEVEL_0);
+	set_intr_stub(EXCEP_IRQ_LEVEL0, gdbstub_io_rx_handler);
+
+	*gdbstub_port->rx_icr |= GxICR_ENABLE;
+	tmp = *gdbstub_port->rx_icr;
+
+	/* enable the device */
+	scxctr = SC01CTR_CLN_8BIT;	/* 1N8 */
+	switch (gdbstub_port->div_timer) {
+	case MNSCx_DIV_TIMER_16BIT:
+		scxctr |= SC0CTR_CK_TM8UFLOW_8; /* == SC1CTR_CK_TM9UFLOW_8
+						   == SC2CTR_CK_TM10UFLOW_8 */
+		break;
+
+	case MNSCx_DIV_TIMER_8BIT:
+		scxctr |= SC0CTR_CK_TM2UFLOW_8;
+		break;
+	}
+
+	scxctr |= SC01CTR_TXE | SC01CTR_RXE;
+
+	*gdbstub_port->_control = scxctr;
+	tmp = *gdbstub_port->_control;
+
+	/* permit level 0 IRQs only */
+	asm volatile(
+		"	and %0,epsw	\n"
+		"	or %1,epsw	\n"
+		:
+		: "i"(~EPSW_IM), "i"(EPSW_IE|EPSW_IM_1)
+		);
+}
+
+/*
+ * set up the GDB stub serial port baud rate timers
+ */
+void gdbstub_io_set_baud(unsigned baud)
+{
+	const unsigned bits = 10; /* 1 [start] + 8 [data] + 0 [parity] +
+				   * 1 [stop] */
+	unsigned long ioclk = gdbstub_port->ioclk;
+	unsigned xdiv, tmp;
+	uint16_t tmxbr;
+	uint8_t tmxmd;
+
+	if (!baud) {
+		baud = 9600;
+	} else if (baud == 134) {
+		baud = 269;	/* 134 is really 134.5 */
+		xdiv = 2;
+	}
+
+try_alternative:
+	xdiv = 1;
+
+	switch (gdbstub_port->div_timer) {
+	case MNSCx_DIV_TIMER_16BIT:
+		tmxmd = TM8MD_SRC_IOCLK;
+		tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+		if (tmp > 0 && tmp <= 65535)
+			goto timer_okay;
+
+		tmxmd = TM8MD_SRC_IOCLK_8;
+		tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+		if (tmp > 0 && tmp <= 65535)
+			goto timer_okay;
+
+		tmxmd = TM8MD_SRC_IOCLK_32;
+		tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+		if (tmp > 0 && tmp <= 65535)
+			goto timer_okay;
+
+		break;
+
+	case MNSCx_DIV_TIMER_8BIT:
+		tmxmd = TM2MD_SRC_IOCLK;
+		tmxbr = tmp = (ioclk / (baud * xdiv) + 4) / 8 - 1;
+		if (tmp > 0 && tmp <= 255)
+			goto timer_okay;
+
+		tmxmd = TM2MD_SRC_IOCLK_8;
+		tmxbr = tmp = (ioclk / (baud * 8 * xdiv) + 4) / 8 - 1;
+		if (tmp > 0 && tmp <= 255)
+			goto timer_okay;
+
+		tmxmd = TM2MD_SRC_IOCLK_32;
+		tmxbr = tmp = (ioclk / (baud * 32 * xdiv) + 4) / 8 - 1;
+		if (tmp > 0 && tmp <= 255)
+			goto timer_okay;
+		break;
+	}
+
+	/* as a last resort, if the quotient is zero, default to 9600 bps */
+	baud = 9600;
+	goto try_alternative;
+
+timer_okay:
+	gdbstub_port->uart.timeout = (2 * bits * HZ) / baud;
+	gdbstub_port->uart.timeout += HZ / 50;
+
+	/* set the timer to produce the required baud rate */
+	switch (gdbstub_port->div_timer) {
+	case MNSCx_DIV_TIMER_16BIT:
+		*gdbstub_port->_tmxmd = 0;
+		*gdbstub_port->_tmxbr = tmxbr;
+		*gdbstub_port->_tmxmd = TM8MD_INIT_COUNTER;
+		*gdbstub_port->_tmxmd = tmxmd | TM8MD_COUNT_ENABLE;
+		break;
+
+	case MNSCx_DIV_TIMER_8BIT:
+		*gdbstub_port->_tmxmd = 0;
+		*(volatile u8 *) gdbstub_port->_tmxbr = (u8)tmxbr;
+		*gdbstub_port->_tmxmd = TM2MD_INIT_COUNTER;
+		*gdbstub_port->_tmxmd = tmxmd | TM2MD_COUNT_ENABLE;
+		break;
+	}
+}
+
+/*
+ * wait for a character to come from the debugger
+ */
+int gdbstub_io_rx_char(unsigned char *_ch, int nonblock)
+{
+	unsigned ix;
+	u8 ch, st;
+
+	*_ch = 0xff;
+
+	if (gdbstub_rx_unget) {
+		*_ch = gdbstub_rx_unget;
+		gdbstub_rx_unget = 0;
+		return 0;
+	}
+
+try_again:
+	/* pull chars out of the buffer */
+	ix = gdbstub_rx_outp;
+	if (ix == gdbstub_rx_inp) {
+		if (nonblock)
+			return -EAGAIN;
+#ifdef CONFIG_MN10300_WD_TIMER
+		watchdog_alert_counter = 0;
+#endif /* CONFIG_MN10300_WD_TIMER */
+		goto try_again;
+	}
+
+	ch = gdbstub_rx_buffer[ix++];
+	st = gdbstub_rx_buffer[ix++];
+	gdbstub_rx_outp = ix & (PAGE_SIZE - 1);
+
+	st &= SC01STR_RXF | SC01STR_RBF | SC01STR_FEF | SC01STR_PEF |
+		SC01STR_OEF;
+
+	/* deal with what we've got
+	 * - note that the UART doesn't do BREAK-detection for us
+	 */
+	if (st & SC01STR_FEF && ch == 0) {
+		switch (gdbstub_port->rx_brk) {
+		case 0:	gdbstub_port->rx_brk = 1;	goto try_again;
+		case 1:	gdbstub_port->rx_brk = 2;	goto try_again;
+		case 2:
+			gdbstub_port->rx_brk = 3;
+			gdbstub_proto("### GDB MNSERIAL Rx Break Detected"
+				      " ###\n");
+			return -EINTR;
+		default:
+			goto try_again;
+		}
+	} else if (st & SC01STR_FEF) {
+		if (gdbstub_port->rx_brk)
+			goto try_again;
+
+		gdbstub_proto("### GDB MNSERIAL Framing Error ###\n");
+		return -EIO;
+	} else if (st & SC01STR_OEF) {
+		if (gdbstub_port->rx_brk)
+			goto try_again;
+
+		gdbstub_proto("### GDB MNSERIAL Overrun Error ###\n");
+		return -EIO;
+	} else if (st & SC01STR_PEF) {
+		if (gdbstub_port->rx_brk)
+			goto try_again;
+
+		gdbstub_proto("### GDB MNSERIAL Parity Error ###\n");
+		return -EIO;
+	} else {
+		/* look for the tail-end char on a break run */
+		if (gdbstub_port->rx_brk == 3) {
+			switch (ch) {
+			case 0xFF:
+			case 0xFE:
+			case 0xFC:
+			case 0xF8:
+			case 0xF0:
+			case 0xE0:
+			case 0xC0:
+			case 0x80:
+			case 0x00:
+				gdbstub_port->rx_brk = 0;
+				goto try_again;
+			default:
+				break;
+			}
+		}
+
+		gdbstub_port->rx_brk = 0;
+		gdbstub_io("### GDB Rx %02x (st=%02x) ###\n", ch, st);
+		*_ch = ch & 0x7f;
+		return 0;
+	}
+}
+
+/*
+ * send a character to the debugger
+ */
+void gdbstub_io_tx_char(unsigned char ch)
+{
+	while (*gdbstub_port->_status & SC01STR_TBF)
+		continue;
+
+	if (ch == 0x0a) {
+		*(u8 *) gdbstub_port->_txb = 0x0d;
+		while (*gdbstub_port->_status & SC01STR_TBF)
+			continue;
+	}
+
+	*(u8 *) gdbstub_port->_txb = ch;
+}
+
+/*
+ * flush the transmission buffers
+ */
+void gdbstub_io_tx_flush(void)
+{
+	while (*gdbstub_port->_status & (SC01STR_TBF | SC01STR_TXF))
+		continue;
+}