MIPS: SGI-IP27: restructure ioc3 register access

Break up the big ioc3 register struct into functional pieces to
make use in sub-function drivers more straightforward. And while
doing that get rid of all volatile access by using readX/writeX.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 146 insertions, 216 deletions

diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
index 25c8dccab51f..a947eed48fee 100644
--- a/arch/mips/include/asm/sn/ioc3.h
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -3,169 +3,161 @@
  * Copyright (C) 1999, 2000 Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
-#ifndef _IOC3_H
-#define _IOC3_H
+#ifndef MIPS_SN_IOC3_H
+#define MIPS_SN_IOC3_H
 
 #include <linux/types.h>
 
+/* serial port register map */
+struct ioc3_serialregs {
+	u32	sscr;
+	u32	stpir;
+	u32	stcir;
+	u32	srpir;
+	u32	srcir;
+	u32	srtr;
+	u32	shadow;
+};
+
 /* SUPERIO uart register map */
-typedef volatile struct ioc3_uartregs {
+struct ioc3_uartregs {
 	union {
-		volatile u8	rbr;	/* read only, DLAB == 0 */
-		volatile u8	thr;	/* write only, DLAB == 0 */
-		volatile u8	dll;	/* DLAB == 1 */
-	} u1;
+		u8	iu_rbr;	/* read only, DLAB == 0 */
+		u8	iu_thr;	/* write only, DLAB == 0 */
+		u8	iu_dll;	/* DLAB == 1 */
+	};
 	union {
-		volatile u8	ier;	/* DLAB == 0 */
-		volatile u8	dlm;	/* DLAB == 1 */
-	} u2;
+		u8	iu_ier;	/* DLAB == 0 */
+		u8	iu_dlm;	/* DLAB == 1 */
+	};
 	union {
-		volatile u8	iir;	/* read only */
-		volatile u8	fcr;	/* write only */
-	} u3;
-	volatile u8	    iu_lcr;
-	volatile u8	    iu_mcr;
-	volatile u8	    iu_lsr;
-	volatile u8	    iu_msr;
-	volatile u8	    iu_scr;
-} ioc3_uregs_t;
-
-#define iu_rbr u1.rbr
-#define iu_thr u1.thr
-#define iu_dll u1.dll
-#define iu_ier u2.ier
-#define iu_dlm u2.dlm
-#define iu_iir u3.iir
-#define iu_fcr u3.fcr
+		u8	iu_iir;	/* read only */
+		u8	iu_fcr;	/* write only */
+	};
+	u8	iu_lcr;
+	u8	iu_mcr;
+	u8	iu_lsr;
+	u8	iu_msr;
+	u8	iu_scr;
+};
 
 struct ioc3_sioregs {
-	volatile u8		fill[0x141];	/* starts at 0x141 */
+	u8	fill[0x141];	/* starts at 0x141 */
 
-	volatile u8		uartc;
-	volatile u8		kbdcg;
+	u8	uartc;
+	u8	kbdcg;
 
-	volatile u8		fill0[0x150 - 0x142 - 1];
+	u8	fill0[0x150 - 0x142 - 1];
 
-	volatile u8		pp_data;
-	volatile u8		pp_dsr;
-	volatile u8		pp_dcr;
+	u8	pp_data;
+	u8	pp_dsr;
+	u8	pp_dcr;
 
-	volatile u8		fill1[0x158 - 0x152 - 1];
+	u8	fill1[0x158 - 0x152 - 1];
 
-	volatile u8		pp_fifa;
-	volatile u8		pp_cfgb;
-	volatile u8		pp_ecr;
+	u8	pp_fifa;
+	u8	pp_cfgb;
+	u8	pp_ecr;
 
-	volatile u8		fill2[0x168 - 0x15a - 1];
+	u8	fill2[0x168 - 0x15a - 1];
 
-	volatile u8		rtcad;
-	volatile u8		rtcdat;
+	u8	rtcad;
+	u8	rtcdat;
 
-	volatile u8		fill3[0x170 - 0x169 - 1];
+	u8	fill3[0x170 - 0x169 - 1];
 
 	struct ioc3_uartregs	uartb;	/* 0x20170  */
 	struct ioc3_uartregs	uarta;	/* 0x20178  */
 };
 
+struct ioc3_ethregs {
+	u32	emcr;		/* 0x000f0  */
+	u32	eisr;		/* 0x000f4  */
+	u32	eier;		/* 0x000f8  */
+	u32	ercsr;		/* 0x000fc  */
+	u32	erbr_h;		/* 0x00100  */
+	u32	erbr_l;		/* 0x00104  */
+	u32	erbar;		/* 0x00108  */
+	u32	ercir;		/* 0x0010c  */
+	u32	erpir;		/* 0x00110  */
+	u32	ertr;		/* 0x00114  */
+	u32	etcsr;		/* 0x00118  */
+	u32	ersr;		/* 0x0011c  */
+	u32	etcdc;		/* 0x00120  */
+	u32	ebir;		/* 0x00124  */
+	u32	etbr_h;		/* 0x00128  */
+	u32	etbr_l;		/* 0x0012c  */
+	u32	etcir;		/* 0x00130  */
+	u32	etpir;		/* 0x00134  */
+	u32	emar_h;		/* 0x00138  */
+	u32	emar_l;		/* 0x0013c  */
+	u32	ehar_h;		/* 0x00140  */
+	u32	ehar_l;		/* 0x00144  */
+	u32	micr;		/* 0x00148  */
+	u32	midr_r;		/* 0x0014c  */
+	u32	midr_w;		/* 0x00150  */
+};
+
+struct ioc3_serioregs {
+	u32	km_csr;		/* 0x0009c  */
+	u32	k_rd;		/* 0x000a0  */
+	u32	m_rd;		/* 0x000a4  */
+	u32	k_wd;		/* 0x000a8  */
+	u32	m_wd;		/* 0x000ac  */
+};
+
 /* Register layout of IOC3 in configuration space.  */
 struct ioc3 {
-	volatile u32	pad0[7];	/* 0x00000  */
-	volatile u32	sio_ir;		/* 0x0001c  */
-	volatile u32	sio_ies;	/* 0x00020  */
-	volatile u32	sio_iec;	/* 0x00024  */
-	volatile u32	sio_cr;		/* 0x00028  */
-	volatile u32	int_out;	/* 0x0002c  */
-	volatile u32	mcr;		/* 0x00030  */
+	/* PCI Config Space registers  */
+	u32	pci_id;		/* 0x00000  */
+	u32	pci_scr;	/* 0x00004  */
+	u32	pci_rev;	/* 0x00008  */
+	u32	pci_lat;	/* 0x0000c  */
+	u32	pci_addr;	/* 0x00010  */
+	u32	pci_err_addr_l;	/* 0x00014  */
+	u32	pci_err_addr_h;	/* 0x00018  */
+
+	u32	sio_ir;		/* 0x0001c  */
+	u32	sio_ies;	/* 0x00020  */
+	u32	sio_iec;	/* 0x00024  */
+	u32	sio_cr;		/* 0x00028  */
+	u32	int_out;	/* 0x0002c  */
+	u32	mcr;		/* 0x00030  */
 
 	/* General Purpose I/O registers  */
-	volatile u32	gpcr_s;		/* 0x00034  */
-	volatile u32	gpcr_c;		/* 0x00038  */
-	volatile u32	gpdr;		/* 0x0003c  */
-	volatile u32	gppr_0;		/* 0x00040  */
-	volatile u32	gppr_1;		/* 0x00044  */
-	volatile u32	gppr_2;		/* 0x00048  */
-	volatile u32	gppr_3;		/* 0x0004c  */
-	volatile u32	gppr_4;		/* 0x00050  */
-	volatile u32	gppr_5;		/* 0x00054  */
-	volatile u32	gppr_6;		/* 0x00058  */
-	volatile u32	gppr_7;		/* 0x0005c  */
-	volatile u32	gppr_8;		/* 0x00060  */
-	volatile u32	gppr_9;		/* 0x00064  */
-	volatile u32	gppr_10;	/* 0x00068  */
-	volatile u32	gppr_11;	/* 0x0006c  */
-	volatile u32	gppr_12;	/* 0x00070  */
-	volatile u32	gppr_13;	/* 0x00074  */
-	volatile u32	gppr_14;	/* 0x00078  */
-	volatile u32	gppr_15;	/* 0x0007c  */
+	u32	gpcr_s;		/* 0x00034  */
+	u32	gpcr_c;		/* 0x00038  */
+	u32	gpdr;		/* 0x0003c  */
+	u32	gppr[16];	/* 0x00040  */
 
 	/* Parallel Port Registers  */
-	volatile u32	ppbr_h_a;	/* 0x00080  */
-	volatile u32	ppbr_l_a;	/* 0x00084  */
-	volatile u32	ppcr_a;		/* 0x00088  */
-	volatile u32	ppcr;		/* 0x0008c  */
-	volatile u32	ppbr_h_b;	/* 0x00090  */
-	volatile u32	ppbr_l_b;	/* 0x00094  */
-	volatile u32	ppcr_b;		/* 0x00098  */
+	u32	ppbr_h_a;	/* 0x00080  */
+	u32	ppbr_l_a;	/* 0x00084  */
+	u32	ppcr_a;		/* 0x00088  */
+	u32	ppcr;		/* 0x0008c  */
+	u32	ppbr_h_b;	/* 0x00090  */
+	u32	ppbr_l_b;	/* 0x00094  */
+	u32	ppcr_b;		/* 0x00098  */
 
 	/* Keyboard and Mouse Registers	 */
-	volatile u32	km_csr;		/* 0x0009c  */
-	volatile u32	k_rd;		/* 0x000a0  */
-	volatile u32	m_rd;		/* 0x000a4  */
-	volatile u32	k_wd;		/* 0x000a8  */
-	volatile u32	m_wd;		/* 0x000ac  */
+	struct ioc3_serioregs	serio;
 
 	/* Serial Port Registers  */
-	volatile u32	sbbr_h;		/* 0x000b0  */
-	volatile u32	sbbr_l;		/* 0x000b4  */
-	volatile u32	sscr_a;		/* 0x000b8  */
-	volatile u32	stpir_a;	/* 0x000bc  */
-	volatile u32	stcir_a;	/* 0x000c0  */
-	volatile u32	srpir_a;	/* 0x000c4  */
-	volatile u32	srcir_a;	/* 0x000c8  */
-	volatile u32	srtr_a;		/* 0x000cc  */
-	volatile u32	shadow_a;	/* 0x000d0  */
-	volatile u32	sscr_b;		/* 0x000d4  */
-	volatile u32	stpir_b;	/* 0x000d8  */
-	volatile u32	stcir_b;	/* 0x000dc  */
-	volatile u32	srpir_b;	/* 0x000e0  */
-	volatile u32	srcir_b;	/* 0x000e4  */
-	volatile u32	srtr_b;		/* 0x000e8  */
-	volatile u32	shadow_b;	/* 0x000ec  */
-
-	/* Ethernet Registers  */
-	volatile u32	emcr;		/* 0x000f0  */
-	volatile u32	eisr;		/* 0x000f4  */
-	volatile u32	eier;		/* 0x000f8  */
-	volatile u32	ercsr;		/* 0x000fc  */
-	volatile u32	erbr_h;		/* 0x00100  */
-	volatile u32	erbr_l;		/* 0x00104  */
-	volatile u32	erbar;		/* 0x00108  */
-	volatile u32	ercir;		/* 0x0010c  */
-	volatile u32	erpir;		/* 0x00110  */
-	volatile u32	ertr;		/* 0x00114  */
-	volatile u32	etcsr;		/* 0x00118  */
-	volatile u32	ersr;		/* 0x0011c  */
-	volatile u32	etcdc;		/* 0x00120  */
-	volatile u32	ebir;		/* 0x00124  */
-	volatile u32	etbr_h;		/* 0x00128  */
-	volatile u32	etbr_l;		/* 0x0012c  */
-	volatile u32	etcir;		/* 0x00130  */
-	volatile u32	etpir;		/* 0x00134  */
-	volatile u32	emar_h;		/* 0x00138  */
-	volatile u32	emar_l;		/* 0x0013c  */
-	volatile u32	ehar_h;		/* 0x00140  */
-	volatile u32	ehar_l;		/* 0x00144  */
-	volatile u32	micr;		/* 0x00148  */
-	volatile u32	midr_r;		/* 0x0014c  */
-	volatile u32	midr_w;		/* 0x00150  */
-	volatile u32	pad1[(0x20000 - 0x00154) / 4];
+	u32	sbbr_h;		/* 0x000b0  */
+	u32	sbbr_l;		/* 0x000b4  */
+	struct ioc3_serialregs	port_a;
+	struct ioc3_serialregs	port_b;
+
+	/* Ethernet Registers */
+	struct ioc3_ethregs	eth;
+	u32	pad1[(0x20000 - 0x00154) / 4];
 
 	/* SuperIO Registers  XXX */
 	struct ioc3_sioregs	sregs;	/* 0x20000 */
-	volatile u32	pad2[(0x40000 - 0x20180) / 4];
+	u32	pad2[(0x40000 - 0x20180) / 4];
 
 	/* SSRAM Diagnostic Access */
-	volatile u32	ssram[(0x80000 - 0x40000) / 4];
+	u32	ssram[(0x80000 - 0x40000) / 4];
 
 	/* Bytebus device offsets
 	   0x80000 -   Access to the generic devices selected with   DEV0
@@ -178,6 +170,20 @@ struct ioc3 {
 	   0xFFFFF     bytebus DEV_SEL_3  */
 };
 
+
+#define PCI_LAT			0xc		/* Latency Timer */
+#define PCI_SCR_DROP_MODE_EN	0x00008000	/* drop pios on parity err */
+#define UARTA_BASE		0x178
+#define UARTB_BASE		0x170
+
+/*
+ * Bytebus device space
+ */
+#define IOC3_BYTEBUS_DEV0	0x80000L
+#define IOC3_BYTEBUS_DEV1	0xa0000L
+#define IOC3_BYTEBUS_DEV2	0xc0000L
+#define IOC3_BYTEBUS_DEV3	0xe0000L
+
 /*
  * Ethernet RX Buffer
  */
@@ -233,28 +239,20 @@ struct ioc3_etxd {
 #define ETXD_B2CNT_MASK		0x7ff00000
 #define ETXD_B2CNT_SHIFT	20
 
-/*
- * Bytebus device space
- */
-#define IOC3_BYTEBUS_DEV0	0x80000L
-#define IOC3_BYTEBUS_DEV1	0xa0000L
-#define IOC3_BYTEBUS_DEV2	0xc0000L
-#define IOC3_BYTEBUS_DEV3	0xe0000L
-
 /* ------------------------------------------------------------------------- */
 
 /* Superio Registers (PIO Access) */
 #define IOC3_SIO_BASE		0x20000
 #define IOC3_SIO_UARTC		(IOC3_SIO_BASE+0x141)	/* UART Config */
 #define IOC3_SIO_KBDCG		(IOC3_SIO_BASE+0x142)	/* KBD Config */
-#define IOC3_SIO_PP_BASE	(IOC3_SIO_BASE+PP_BASE)		/* Parallel Port */
+#define IOC3_SIO_PP_BASE	(IOC3_SIO_BASE+PP_BASE)	/* Parallel Port */
 #define IOC3_SIO_RTC_BASE	(IOC3_SIO_BASE+0x168)	/* Real Time Clock */
 #define IOC3_SIO_UB_BASE	(IOC3_SIO_BASE+UARTB_BASE)	/* UART B */
 #define IOC3_SIO_UA_BASE	(IOC3_SIO_BASE+UARTA_BASE)	/* UART A */
 
 /* SSRAM Diagnostic Access */
 #define IOC3_SSRAM	IOC3_RAM_OFF	/* base of SSRAM diagnostic access */
-#define IOC3_SSRAM_LEN	0x40000 /* 256kb (address space size, may not be fully populated) */
+#define IOC3_SSRAM_LEN	0x40000	/* 256kb (addrspc sz, may not be populated) */
 #define IOC3_SSRAM_DM	0x0000ffff	/* data mask */
 #define IOC3_SSRAM_PM	0x00010000	/* parity mask */
 
@@ -294,10 +292,10 @@ struct ioc3_etxd {
 					   SIO_IR to assert */
 #define KM_CSR_M_TO_EN	  0x00080000	/* KM_CSR_M_TO + KM_CSR_M_TO_EN = cause
 					   SIO_IR to assert */
-#define KM_CSR_K_CLAMP_ONE	0x00100000	/* Pull K_CLK low after rec. one char */
-#define KM_CSR_M_CLAMP_ONE	0x00200000	/* Pull M_CLK low after rec. one char */
-#define KM_CSR_K_CLAMP_THREE	0x00400000	/* Pull K_CLK low after rec. three chars */
-#define KM_CSR_M_CLAMP_THREE	0x00800000	/* Pull M_CLK low after rec. three char */
+#define KM_CSR_K_CLAMP_1  0x00100000	/* Pull K_CLK low aft recv 1 char */
+#define KM_CSR_M_CLAMP_1  0x00200000	/* Pull M_CLK low aft recv 1 char */
+#define KM_CSR_K_CLAMP_3  0x00400000	/* Pull K_CLK low aft recv 3 chars */
+#define KM_CSR_M_CLAMP_3  0x00800000	/* Pull M_CLK low aft recv 3 chars */
 
 /* bitmasks for IOC3_K_RD and IOC3_M_RD */
 #define KM_RD_DATA_2	0x000000ff	/* 3rd char recvd since last read */
@@ -440,10 +438,6 @@ struct ioc3_etxd {
 				 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
 #define SIO_IR_RT		(SIO_IR_RT_INT | SIO_IR_GEN_INT1)
 
-/* macro to load pending interrupts */
-#define IOC3_PENDING_INTRS(mem) (PCI_INW(&((mem)->sio_ir)) & \
-				 PCI_INW(&((mem)->sio_ies_ro)))
-
 /* bitmasks for SIO_CR */
 #define SIO_CR_SIO_RESET	0x00000001	/* reset the SIO */
 #define SIO_CR_SER_A_BASE	0x000000fe	/* DMA poll addr port A */
@@ -500,10 +494,11 @@ struct ioc3_etxd {
 #define GPCR_UARTB_MODESEL	0x40	/* pin is output to port B mode sel */
 #define GPCR_UARTA_MODESEL	0x80	/* pin is output to port A mode sel */
 
-#define GPPR_PHY_RESET_PIN	5	/* GIO pin controlling phy reset */
-#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin controlling uart b mode select */
-#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin controlling uart a mode select */
+#define GPPR_PHY_RESET_PIN	5	/* GIO pin cntrlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin cntrlling uart b mode sel */
+#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin cntrlling uart a mode sel */
 
+/* ethernet */
 #define EMCR_DUPLEX		0x00000001
 #define EMCR_PROMISC		0x00000002
 #define EMCR_PADEN		0x00000004
@@ -595,70 +590,4 @@ struct ioc3_etxd {
 
 #define MIDR_DATA_MASK		0x0000ffff
 
-#define ERXBUF_IPCKSUM_MASK	0x0000ffff
-#define ERXBUF_BYTECNT_MASK	0x07ff0000
-#define ERXBUF_BYTECNT_SHIFT	16
-#define ERXBUF_V		0x80000000
-
-#define ERXBUF_CRCERR		0x00000001	/* aka RSV15 */
-#define ERXBUF_FRAMERR		0x00000002	/* aka RSV14 */
-#define ERXBUF_CODERR		0x00000004	/* aka RSV13 */
-#define ERXBUF_INVPREAMB	0x00000008	/* aka RSV18 */
-#define ERXBUF_LOLEN		0x00007000	/* aka RSV2_0 */
-#define ERXBUF_HILEN		0x03ff0000	/* aka RSV12_3 */
-#define ERXBUF_MULTICAST	0x04000000	/* aka RSV16 */
-#define ERXBUF_BROADCAST	0x08000000	/* aka RSV17 */
-#define ERXBUF_LONGEVENT	0x10000000	/* aka RSV19 */
-#define ERXBUF_BADPKT		0x20000000	/* aka RSV20 */
-#define ERXBUF_GOODPKT		0x40000000	/* aka RSV21 */
-#define ERXBUF_CARRIER		0x80000000	/* aka RSV22 */
-
-#define ETXD_BYTECNT_MASK	0x000007ff	/* total byte count */
-#define ETXD_INTWHENDONE	0x00001000	/* intr when done */
-#define ETXD_D0V		0x00010000	/* data 0 valid */
-#define ETXD_B1V		0x00020000	/* buf 1 valid */
-#define ETXD_B2V		0x00040000	/* buf 2 valid */
-#define ETXD_DOCHECKSUM		0x00080000	/* insert ip cksum */
-#define ETXD_CHKOFF_MASK	0x07f00000	/* cksum byte offset */
-#define ETXD_CHKOFF_SHIFT	20
-
-#define ETXD_D0CNT_MASK		0x0000007f
-#define ETXD_B1CNT_MASK		0x0007ff00
-#define ETXD_B1CNT_SHIFT	8
-#define ETXD_B2CNT_MASK		0x7ff00000
-#define ETXD_B2CNT_SHIFT	20
-
-typedef enum ioc3_subdevs_e {
-    ioc3_subdev_ether,
-    ioc3_subdev_generic,
-    ioc3_subdev_nic,
-    ioc3_subdev_kbms,
-    ioc3_subdev_ttya,
-    ioc3_subdev_ttyb,
-    ioc3_subdev_ecpp,
-    ioc3_subdev_rt,
-    ioc3_nsubdevs
-} ioc3_subdev_t;
-
-/* subdevice disable bits,
- * from the standard INFO_LBL_SUBDEVS
- */
-#define IOC3_SDB_ETHER		(1<<ioc3_subdev_ether)
-#define IOC3_SDB_GENERIC	(1<<ioc3_subdev_generic)
-#define IOC3_SDB_NIC		(1<<ioc3_subdev_nic)
-#define IOC3_SDB_KBMS		(1<<ioc3_subdev_kbms)
-#define IOC3_SDB_TTYA		(1<<ioc3_subdev_ttya)
-#define IOC3_SDB_TTYB		(1<<ioc3_subdev_ttyb)
-#define IOC3_SDB_ECPP		(1<<ioc3_subdev_ecpp)
-#define IOC3_SDB_RT		(1<<ioc3_subdev_rt)
-
-#define IOC3_ALL_SUBDEVS	((1<<ioc3_nsubdevs)-1)
-
-#define IOC3_SDB_SERIAL		(IOC3_SDB_TTYA|IOC3_SDB_TTYB)
-
-#define IOC3_STD_SUBDEVS	IOC3_ALL_SUBDEVS
-
-#define IOC3_INTA_SUBDEVS	IOC3_SDB_ETHER
-#define IOC3_INTB_SUBDEVS	(IOC3_SDB_GENERIC|IOC3_SDB_KBMS|IOC3_SDB_SERIAL|IOC3_SDB_ECPP|IOC3_SDB_RT)
-
-#endif /* _IOC3_H */
+#endif /* MIPS_SN_IOC3_H */
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index 6bdb48d41276..5886bee89d06 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -35,6 +35,7 @@ void prom_putchar(char c)
 {
 	struct ioc3_uartregs *uart = console_uart();
 
-	while ((uart->iu_lsr & 0x20) == 0);
-	uart->iu_thr = c;
+	while ((readb(&uart->iu_lsr) & 0x20) == 0)
+		;
+	writeb(c, &uart->iu_thr);
 }