Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

3 files changed, 324 insertions, 0 deletions

diff --git a/arch/m68knommu/platform/68VZ328/Makefile b/arch/m68knommu/platform/68VZ328/Makefile
new file mode 100644
index 000000000000..447ffa0fd7c7
--- /dev/null
+++ b/arch/m68knommu/platform/68VZ328/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for arch/m68knommu/platform/68VZ328.
+#
+
+obj-y		:= config.o
+logo-$(UCDIMM)	:= bootlogo.rh
+logo-$(DRAGEN2)	:= screen.h
+extra-y		:= $(logo-y)
+
+$(obj)/bootlogo.rh: $(src)/../68EZ328/bootlogo.h
+	perl $(src)/bootlogo.pl < $(src)/../68328/bootlogo.h > $(obj)/bootlogo.rh
+
+$(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl
+	perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h
+
+clean-files := $(obj)/screen.h $(obj)/bootlogo.rh
diff --git a/arch/m68knommu/platform/68VZ328/de2/config.c b/arch/m68knommu/platform/68VZ328/de2/config.c
new file mode 100644
index 000000000000..d0586197f113
--- /dev/null
+++ b/arch/m68knommu/platform/68VZ328/de2/config.c
@@ -0,0 +1,191 @@
+/*
+ *  linux/arch/m68knommu/platform/MC68VZ328/de2/config.c
+ *
+ *  Copyright (C) 1993 Hamish Macdonald
+ *  Copyright (C) 1999 D. Jeff Dionne
+ *  Copyright (C) 2001 Georges Menie, Ken Desmet
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/kd.h>
+#include <linux/netdevice.h>
+
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/MC68VZ328.h>
+
+#ifdef CONFIG_INIT_LCD
+#include "screen.h"
+#endif
+
+/* with a 33.16 MHz clock, this will give usec resolution to the time functions */
+#define CLOCK_SOURCE TCTL_CLKSOURCE_SYSCLK
+#define CLOCK_PRE 7
+#define TICKS_PER_JIFFY 41450
+
+static void
+dragen2_sched_init(irqreturn_t (*timer_routine) (int, void *, struct pt_regs *))
+{
+	/* disable timer 1 */
+	TCTL = 0;
+
+	/* set ISR */
+	if (request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL)) 
+		panic("Unable to attach timer interrupt\n");
+
+	/* Restart mode, Enable int, Set clock source */
+	TCTL = TCTL_OM | TCTL_IRQEN | CLOCK_SOURCE;
+	TPRER = CLOCK_PRE;
+	TCMP = TICKS_PER_JIFFY;
+
+	/* Enable timer 1 */
+	TCTL |= TCTL_TEN;
+}
+
+static void dragen2_tick(void)
+{
+	/* Reset Timer1 */
+	TSTAT &= 0;
+}
+
+static unsigned long dragen2_gettimeoffset(void)
+{
+	unsigned long ticks = TCN, offset = 0;
+
+	/* check for pending interrupt */
+	if (ticks < (TICKS_PER_JIFFY >> 1) && (ISR & (1 << TMR_IRQ_NUM)))
+		offset = 1000000 / HZ;
+
+	ticks = (ticks * 1000000 / HZ) / TICKS_PER_JIFFY;
+
+	return ticks + offset;
+}
+
+static void dragen2_gettod(int *year, int *mon, int *day, int *hour,
+						   int *min, int *sec)
+{
+	long now = RTCTIME;
+
+	*year = *mon = *day = 1;
+	*hour = (now >> 24) % 24;
+	*min = (now >> 16) % 60;
+	*sec = now % 60;
+}
+
+static void dragen2_reset(void)
+{
+	local_irq_disable();
+
+#ifdef CONFIG_INIT_LCD
+	PBDATA |= 0x20;				/* disable CCFL light */
+	PKDATA |= 0x4;				/* disable LCD controller */
+	LCKCON = 0;
+#endif
+
+	__asm__ __volatile__(
+		"reset\n\t"
+		"moveal #0x04000000, %a0\n\t"
+		"moveal 0(%a0), %sp\n\t"
+		"moveal 4(%a0), %a0\n\t"
+		"jmp (%a0)"
+	);
+}
+
+static void init_hardware(void)
+{
+#ifdef CONFIG_DIRECT_IO_ACCESS
+	SCR = 0x10;					/* allow user access to internal registers */
+#endif
+
+	/* CSGB Init */
+	CSGBB = 0x4000;
+	CSB = 0x1a1;
+
+	/* CS8900 init */
+	/* PK3: hardware sleep function pin, active low */
+	PKSEL |= PK(3);				/* select pin as I/O */
+	PKDIR |= PK(3);				/* select pin as output */
+	PKDATA |= PK(3);			/* set pin high */
+
+	/* PF5: hardware reset function pin, active high */
+	PFSEL |= PF(5);				/* select pin as I/O */
+	PFDIR |= PF(5);				/* select pin as output */
+	PFDATA &= ~PF(5);			/* set pin low */
+
+	/* cs8900 hardware reset */
+	PFDATA |= PF(5);
+	{ int i; for (i = 0; i < 32000; ++i); }
+	PFDATA &= ~PF(5);
+
+	/* INT1 enable (cs8900 IRQ) */
+	PDPOL &= ~PD(1);			/* active high signal */
+	PDIQEG &= ~PD(1);
+	PDIRQEN |= PD(1);			/* IRQ enabled */
+
+#ifdef CONFIG_68328_SERIAL_UART2
+	/* Enable RXD TXD port bits to enable UART2 */
+	PJSEL &= ~(PJ(5) | PJ(4));
+#endif
+
+#ifdef CONFIG_INIT_LCD
+	/* initialize LCD controller */
+	LSSA = (long) screen_bits;
+	LVPW = 0x14;
+	LXMAX = 0x140;
+	LYMAX = 0xef;
+	LRRA = 0;
+	LPXCD = 3;
+	LPICF = 0x08;
+	LPOLCF = 0;
+	LCKCON = 0x80;
+	PCPDEN = 0xff;
+	PCSEL = 0;
+
+	/* Enable LCD controller */
+	PKDIR |= 0x4;
+	PKSEL |= 0x4;
+	PKDATA &= ~0x4;
+
+	/* Enable CCFL backlighting circuit */
+	PBDIR |= 0x20;
+	PBSEL |= 0x20;
+	PBDATA &= ~0x20;
+
+	/* contrast control register */
+	PFDIR |= 0x1;
+	PFSEL &= ~0x1;
+	PWMR = 0x037F;
+#endif
+}
+
+void config_BSP(char *command, int size)
+{
+	printk(KERN_INFO "68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
+
+#if defined(CONFIG_BOOTPARAM)
+	strncpy(command, CONFIG_BOOTPARAM_STRING, size);
+	command[size-1] = 0;
+#else
+	memset(command, 0, size);
+#endif
+
+	init_hardware();
+
+	mach_sched_init = (void *)dragen2_sched_init;
+	mach_tick = dragen2_tick;
+	mach_gettimeoffset = dragen2_gettimeoffset;
+	mach_reset = dragen2_reset;
+	mach_gettod = dragen2_gettod;
+}
diff --git a/arch/m68knommu/platform/68VZ328/ucdimm/config.c b/arch/m68knommu/platform/68VZ328/ucdimm/config.c
new file mode 100644
index 000000000000..2deadaffd81e
--- /dev/null
+++ b/arch/m68knommu/platform/68VZ328/ucdimm/config.c
@@ -0,0 +1,117 @@
+/*
+ *  linux/arch/m68knommu/platform/68VZ328/ucdimm/config.c
+ *
+ *  Copyright (C) 1993 Hamish Macdonald
+ *  Copyright (C) 1999 D. Jeff Dionne
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <stdarg.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/MC68VZ328.h>
+#include <asm/bootstd.h>
+
+void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *))
+{
+	/* Restart mode, Enable int, 32KHz, Enable timer */
+	TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
+	/* Set prescaler (Divide 32KHz by 32)*/
+	TPRER = 31;
+	/* Set compare register  32Khz / 32 / 10 = 100 */
+	TCMP = 10;                                                              
+
+	request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
+}
+
+void BSP_tick(void)
+{
+  	/* Reset Timer1 */
+	TSTAT &= 0;
+}
+
+unsigned long BSP_gettimeoffset (void)
+{
+	return 0;
+}
+
+void BSP_gettod (int *yearp, int *monp, int *dayp,
+		   int *hourp, int *minp, int *secp)
+{
+}
+
+int BSP_hwclk(int op, struct hwclk_time *t)
+{
+	if (!op) {
+		/* read */
+	} else {
+		/* write */
+	}
+	return 0;
+}
+
+int BSP_set_clock_mmss (unsigned long nowtime)
+{
+#if 0
+	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+
+	tod->second1 = real_seconds / 10;
+	tod->second2 = real_seconds % 10;
+	tod->minute1 = real_minutes / 10;
+	tod->minute2 = real_minutes % 10;
+#endif
+	return 0;
+}
+
+void BSP_reset (void)
+{
+	local_irq_disable();
+	asm volatile ("
+		moveal #0x10c00000, %a0;
+		moveb #0, 0xFFFFF300;
+		moveal 0(%a0), %sp;
+		moveal 4(%a0), %a0;
+		jmp (%a0);
+	");
+}
+
+unsigned char *cs8900a_hwaddr;
+static int errno;
+
+_bsc0(char *, getserialnum)
+_bsc1(unsigned char *, gethwaddr, int, a)
+_bsc1(char *, getbenv, char *, a)
+
+void config_BSP(char *command, int len)
+{
+	unsigned char *p;
+
+	printk(KERN_INFO "\n68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
+
+	printk(KERN_INFO "uCdimm serial string [%s]\n",getserialnum());
+	p = cs8900a_hwaddr = gethwaddr(0);
+	printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+		p[0], p[1], p[2], p[3], p[4], p[5]);
+	p = getbenv("APPEND");
+	if (p) strcpy(p,command);
+	else command[0] = 0;
+ 
+	mach_sched_init      = BSP_sched_init;
+	mach_tick            = BSP_tick;
+	mach_gettimeoffset   = BSP_gettimeoffset;
+	mach_gettod          = BSP_gettod;
+	mach_reset           = BSP_reset;
+}