m68knommu: move the 527x platform code into the common ColdFire code directory

All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

2 files changed, 142 insertions, 1 deletions

diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile
index ec81d0545592..8bef3463de21 100644
--- a/arch/m68k/platform/coldfire/Makefile
+++ b/arch/m68k/platform/coldfire/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_M5206e)	+= m5206.o timers.o intc.o reset.o
 obj-$(CONFIG_M520x)	+= m520x.o pit.o intc-simr.o reset.o
 obj-$(CONFIG_M523x)	+= m523x.o pit.o dma_timer.o intc-2.o reset.o
 obj-$(CONFIG_M5249)	+= m5249.o timers.o intc.o intc-5249.o reset.o
-obj-$(CONFIG_M527x)	+= pit.o intc-2.o reset.o
+obj-$(CONFIG_M527x)	+= m527x.o pit.o intc-2.o reset.o
 obj-$(CONFIG_M5272)	+= m5272.o intc-5272.o timers.o
 obj-$(CONFIG_M528x)	+= pit.o intc-2.o reset.o
 obj-$(CONFIG_M5307)	+= timers.o intc.o reset.o
diff --git a/arch/m68k/platform/coldfire/m527x.c b/arch/m68k/platform/coldfire/m527x.c
new file mode 100644
index 000000000000..9b0b66aabd1b
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m527x.c
@@ -0,0 +1,141 @@
+/***************************************************************************/
+
+/*
+ *	linux/arch/m68knommu/platform/527x/config.c
+ *
+ *	Sub-architcture dependent initialization code for the Freescale
+ *	5270/5271 CPUs.
+ *
+ *	Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+#if defined(CONFIG_M5271)
+	MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+	MCFGPF(ADDR, 13, 3),
+	MCFGPF(DATAH, 16, 8),
+	MCFGPF(DATAL, 24, 8),
+	MCFGPF(BUSCTL, 32, 8),
+	MCFGPF(BS, 40, 4),
+	MCFGPF(CS, 49, 7),
+	MCFGPF(SDRAM, 56, 6),
+	MCFGPF(FECI2C, 64, 4),
+	MCFGPF(UARTH, 72, 2),
+	MCFGPF(UARTL, 80, 8),
+	MCFGPF(QSPI, 88, 5),
+	MCFGPF(TIMER, 96, 8),
+#elif defined(CONFIG_M5275)
+	MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+	MCFGPF(BUSCTL, 8, 8),
+	MCFGPF(ADDR, 21, 3),
+	MCFGPF(CS, 25, 7),
+	MCFGPF(FEC0H, 32, 8),
+	MCFGPF(FEC0L, 40, 8),
+	MCFGPF(FECI2C, 48, 6),
+	MCFGPF(QSPI, 56, 7),
+	MCFGPF(SDRAM, 64, 8),
+	MCFGPF(TIMERH, 72, 4),
+	MCFGPF(TIMERL, 80, 4),
+	MCFGPF(UARTL, 88, 8),
+	MCFGPF(FEC1H, 96, 8),
+	MCFGPF(FEC1L, 104, 8),
+	MCFGPF(BS, 114, 2),
+	MCFGPF(IRQ, 121, 7),
+	MCFGPF(USBH, 128, 1),
+	MCFGPF(USBL, 136, 8),
+	MCFGPF(UARTH, 144, 4),
+#endif
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m527x_qspi_init(void)
+{
+#if defined(CONFIG_M5271)
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+#elif defined(CONFIG_M5275)
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writew(0x003e, MCFGPIO_PAR_QSPI);
+#endif
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+static void __init m527x_uarts_init(void)
+{
+	u16 sepmask;
+
+	/*
+	 * External Pin Mask Setting & Enable External Pin for Interface
+	 */
+	sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+	sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
+	writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+}
+
+/***************************************************************************/
+
+static void __init m527x_fec_init(void)
+{
+	u16 par;
+	u8 v;
+
+	/* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+	v = readb(MCF_IPSBAR + 0x100047);
+	writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+#else
+	par = readw(MCF_IPSBAR + 0x100082);
+	writew(par | 0xf00, MCF_IPSBAR + 0x100082);
+	v = readb(MCF_IPSBAR + 0x100078);
+	writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+
+	/* Set multi-function pins to ethernet mode for fec1 */
+	par = readw(MCF_IPSBAR + 0x100082);
+	writew(par | 0xa0, MCF_IPSBAR + 0x100082);
+	v = readb(MCF_IPSBAR + 0x100079);
+	writeb(v | 0xc0, MCF_IPSBAR + 0x100079);
+#endif
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+	m527x_uarts_init();
+	m527x_fec_init();
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	m527x_qspi_init();
+#endif
+}
+
+/***************************************************************************/