m68k: merge m68k and m68knommu arch directories

There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

3 files changed, 194 insertions, 0 deletions

diff --git a/arch/m68k/platform/5206e/Makefile b/arch/m68k/platform/5206e/Makefile
new file mode 100644
index 000000000000..b5db05625cfa
--- /dev/null
+++ b/arch/m68k/platform/5206e/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for the m68knommu linux kernel.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this,  which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs.  You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# ccflags-y := -DTRAP_DBG_INTERRUPT
+# asflags-y := -DTRAP_DBG_INTERRUPT
+#
+
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
+
+obj-y := config.o gpio.o
+
diff --git a/arch/m68k/platform/5206e/config.c b/arch/m68k/platform/5206e/config.c
new file mode 100644
index 000000000000..942397984c66
--- /dev/null
+++ b/arch/m68k/platform/5206e/config.c
@@ -0,0 +1,127 @@
+/***************************************************************************/
+
+/*
+ *	linux/arch/m68knommu/platform/5206e/config.c
+ *
+ *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfdma.h>
+
+/***************************************************************************/
+
+static struct mcf_platform_uart m5206e_uart_platform[] = {
+	{
+		.mapbase	= MCF_MBAR + MCFUART_BASE1,
+		.irq		= 73,
+	},
+	{
+		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
+		.irq		= 74,
+	},
+	{ },
+};
+
+static struct platform_device m5206e_uart = {
+	.name			= "mcfuart",
+	.id			= 0,
+	.dev.platform_data	= m5206e_uart_platform,
+};
+
+static struct platform_device *m5206e_devices[] __initdata = {
+	&m5206e_uart,
+};
+
+/***************************************************************************/
+
+static void __init m5206e_uart_init_line(int line, int irq)
+{
+	if (line == 0) {
+		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
+		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
+		mcf_mapirq2imr(irq, MCFINTC_UART0);
+	} else if (line == 1) {
+		writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
+		writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
+		mcf_mapirq2imr(irq, MCFINTC_UART1);
+	}
+}
+
+static void __init m5206e_uarts_init(void)
+{
+	const int nrlines = ARRAY_SIZE(m5206e_uart_platform);
+	int line;
+
+	for (line = 0; (line < nrlines); line++)
+		m5206e_uart_init_line(line, m5206e_uart_platform[line].irq);
+}
+
+/***************************************************************************/
+
+static void __init m5206e_timers_init(void)
+{
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
+}
+
+/***************************************************************************/
+
+void m5206e_cpu_reset(void)
+{
+	local_irq_disable();
+	/* Set watchdog to soft reset, and enabled */
+	__raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
+	for (;;)
+		/* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel)
+	/* Copy command line from FLASH to local buffer... */
+	memcpy(commandp, (char *) 0xf0004000, size);
+	commandp[size-1] = 0;
+#endif /* CONFIG_NETtel */
+
+	mach_reset = m5206e_cpu_reset;
+	m5206e_timers_init();
+	m5206e_uarts_init();
+
+	/* Only support the external interrupts on their primary level */
+	mcf_mapirq2imr(25, MCFINTC_EINT1);
+	mcf_mapirq2imr(28, MCFINTC_EINT4);
+	mcf_mapirq2imr(31, MCFINTC_EINT7);
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+	platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices));
+	return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/5206e/gpio.c b/arch/m68k/platform/5206e/gpio.c
new file mode 100644
index 000000000000..b9ab4a120f28
--- /dev/null
+++ b/arch/m68k/platform/5206e/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * Coldfire generic GPIO support
+ *
+ * (C) Copyright 2009, Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+static struct mcf_gpio_chip mcf_gpio_chips[] = {
+	{
+		.gpio_chip			= {
+			.label			= "PP",
+			.request		= mcf_gpio_request,
+			.free			= mcf_gpio_free,
+			.direction_input	= mcf_gpio_direction_input,
+			.direction_output	= mcf_gpio_direction_output,
+			.get			= mcf_gpio_get_value,
+			.set			= mcf_gpio_set_value,
+			.ngpio			= 8,
+		},
+		.pddr				= (void __iomem *) MCFSIM_PADDR,
+		.podr				= (void __iomem *) MCFSIM_PADAT,
+		.ppdr				= (void __iomem *) MCFSIM_PADAT,
+	},
+};
+
+static int __init mcf_gpio_init(void)
+{
+	unsigned i = 0;
+	while (i < ARRAY_SIZE(mcf_gpio_chips))
+		(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
+	return 0;
+}
+
+core_initcall(mcf_gpio_init);