Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68knommu updates from Greg Ungerer:
 "This one has a major restructuring of the non-mmu 68000 support.

  It merges all the related SoC types that use the original 68000 cpu
  core internally so they can share the same core code.  It also allows
  for supporting the original stand alone 68000 cpu in its own right.

  There is also a generalization of the clock support of the ColdFire
  parts, some merging of common ColdFire code, and a couple of bug fixes
  as well."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: modify clock code so it can be used by all ColdFire CPU types
  m68knommu: add clock definitions for 54xx ColdFire CPU types
  m68knommu: add clock definitions for 5407 ColdFire CPU types
  m68knommu: add clock definitions for 5307 ColdFire CPU types
  m68knommu: add clock definitions for 528x ColdFire CPU types
  m68knommu: add clock definitions for 527x ColdFire CPU types
  m68knommu: add clock definitions for 5272 ColdFire CPU types
  m68knommu: add clock definitions for 525x ColdFire CPU types
  m68knommu: add clock definitions for 5249 ColdFire CPU types
  m68knommu: add clock definitions for 523x ColdFire CPU types
  m68knommu: add clock definitions for 5206 ColdFire CPU types
  m68knommu: add clock creation support macro for other ColdFire CPUs
  m68k: fix unused variable warning in mempcy.c
  m68knommu: make non-MMU page_to_virt() return a void *
  m68knommu: merge ColdFire 5249 and 525x definitions
  m68knommu: disable MC68000 cpu target when MMU is selected
  m68knommu: allow for configuration of true 68000 based systems
  m68knommu: platform code merge for 68000 core cpus

5 files changed, 125 insertions, 276 deletions

diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
deleted file mode 100644
index fdf45e6807c9..000000000000
--- a/arch/m68k/include/asm/m5249sim.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/****************************************************************************/
-
-/*
- *	m5249sim.h -- ColdFire 5249 System Integration Module support.
- *
- *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/****************************************************************************/
-#ifndef	m5249sim_h
-#define	m5249sim_h
-/****************************************************************************/
-
-#define	CPU_NAME		"COLDFIRE(m5249)"
-#define	CPU_INSTR_PER_JIFFY	3
-#define	MCF_BUSCLK		(MCF_CLK / 2)
-
-#include <asm/m52xxacr.h>
-
-/*
- *	The 5249 has a second MBAR region, define its address.
- */
-#define MCF_MBAR2		0x80000000
-
-/*
- *	Define the 5249 SIM register set addresses.
- */
-#define	MCFSIM_RSR		(MCF_MBAR + 0x00)	/* Reset Status */
-#define	MCFSIM_SYPCR		(MCF_MBAR + 0x01)	/* System Protection */
-#define	MCFSIM_SWIVR		(MCF_MBAR + 0x02)	/* SW Watchdog intr */
-#define	MCFSIM_SWSR		(MCF_MBAR + 0x03)	/* SW Watchdog srv */
-#define	MCFSIM_PAR		(MCF_MBAR + 0x04)	/* Pin Assignment */
-#define	MCFSIM_IRQPAR		(MCF_MBAR + 0x06)	/* Intr Assignment */
-#define	MCFSIM_MPARK		(MCF_MBAR + 0x0C)	/* BUS Master Ctrl */
-#define	MCFSIM_IPR		(MCF_MBAR + 0x40)	/* Interrupt Pending */
-#define	MCFSIM_IMR		(MCF_MBAR + 0x44)	/* Interrupt Mask */
-#define	MCFSIM_AVR		(MCF_MBAR + 0x4b)	/* Autovector Ctrl */
-#define	MCFSIM_ICR0		(MCF_MBAR + 0x4c)	/* Intr Ctrl reg 0 */
-#define	MCFSIM_ICR1		(MCF_MBAR + 0x4d)	/* Intr Ctrl reg 1 */
-#define	MCFSIM_ICR2		(MCF_MBAR + 0x4e)	/* Intr Ctrl reg 2 */
-#define	MCFSIM_ICR3		(MCF_MBAR + 0x4f)	/* Intr Ctrl reg 3 */
-#define	MCFSIM_ICR4		(MCF_MBAR + 0x50)	/* Intr Ctrl reg 4 */
-#define	MCFSIM_ICR5		(MCF_MBAR + 0x51)	/* Intr Ctrl reg 5 */
-#define	MCFSIM_ICR6		(MCF_MBAR + 0x52)	/* Intr Ctrl reg 6 */
-#define	MCFSIM_ICR7		(MCF_MBAR + 0x53)	/* Intr Ctrl reg 7 */
-#define	MCFSIM_ICR8		(MCF_MBAR + 0x54)	/* Intr Ctrl reg 8 */
-#define	MCFSIM_ICR9		(MCF_MBAR + 0x55)	/* Intr Ctrl reg 9 */
-#define	MCFSIM_ICR10		(MCF_MBAR + 0x56)	/* Intr Ctrl reg 10 */
-#define	MCFSIM_ICR11		(MCF_MBAR + 0x57)	/* Intr Ctrl reg 11 */
-
-#define	MCFSIM_CSAR0		(MCF_MBAR + 0x80)	/* CS 0 Address reg */
-#define	MCFSIM_CSMR0		(MCF_MBAR + 0x84)	/* CS 0 Mask reg */
-#define	MCFSIM_CSCR0		(MCF_MBAR + 0x8a)	/* CS 0 Control reg */
-#define	MCFSIM_CSAR1		(MCF_MBAR + 0x8c)	/* CS 1 Address reg */
-#define	MCFSIM_CSMR1		(MCF_MBAR + 0x90)	/* CS 1 Mask reg */
-#define	MCFSIM_CSCR1		(MCF_MBAR + 0x96)	/* CS 1 Control reg */
-#define	MCFSIM_CSAR2		(MCF_MBAR + 0x98)	/* CS 2 Address reg */
-#define	MCFSIM_CSMR2		(MCF_MBAR + 0x9c)	/* CS 2 Mask reg */
-#define	MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
-#define	MCFSIM_CSAR3		(MCF_MBAR + 0xa4)	/* CS 3 Address reg */
-#define	MCFSIM_CSMR3		(MCF_MBAR + 0xa8)	/* CS 3 Mask reg */
-#define	MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
-
-#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
-#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
-#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
-#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
-#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
-
-/*
- *	Timer module.
- */
-#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
-#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
-
-/*
- *	UART module.
- */
-#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
-#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
-
-/*
- *	QSPI module.
- */
-#define	MCFQSPI_BASE		(MCF_MBAR + 0x300)	/* Base address QSPI */
-#define	MCFQSPI_SIZE		0x40			/* Register set size */
-
-#define	MCFQSPI_CS0		29
-#define	MCFQSPI_CS1		24
-#define	MCFQSPI_CS2		21
-#define	MCFQSPI_CS3		22
-
-/*
- *	DMA unit base addresses.
- */
-#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
-#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
-#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
-#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
-
-/*
- *	Some symbol defines for the above...
- */
-#define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
-#define	MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
-#define	MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
-#define	MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
-#define	MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
-#define	MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
-#define	MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
-#define	MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
-#define	MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
-#define	MCFSIM_QSPIICR		MCFSIM_ICR10	/* QSPI ICR */
-
-/*
- *	Define system peripheral IRQ usage.
- */
-#define	MCF_IRQ_QSPI		28		/* QSPI, Level 4 */
-#define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
-#define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
-
-#define	MCF_IRQ_UART0		73		/* UART0 */
-#define	MCF_IRQ_UART1		74		/* UART1 */
-
-/*
- *	General purpose IO registers (in MBAR2).
- */
-#define	MCFSIM2_GPIOREAD	(MCF_MBAR2 + 0x000)	/* GPIO read values */
-#define	MCFSIM2_GPIOWRITE	(MCF_MBAR2 + 0x004)	/* GPIO write values */
-#define	MCFSIM2_GPIOENABLE	(MCF_MBAR2 + 0x008)	/* GPIO enabled */
-#define	MCFSIM2_GPIOFUNC	(MCF_MBAR2 + 0x00C)	/* GPIO function */
-#define	MCFSIM2_GPIO1READ	(MCF_MBAR2 + 0x0B0)	/* GPIO1 read values */
-#define	MCFSIM2_GPIO1WRITE	(MCF_MBAR2 + 0x0B4)	/* GPIO1 write values */
-#define	MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
-#define	MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */
-
-#define	MCFSIM2_GPIOINTSTAT	(MCF_MBAR2 + 0xc0)	/* GPIO intr status */
-#define	MCFSIM2_GPIOINTCLEAR	(MCF_MBAR2 + 0xc0)	/* GPIO intr clear */
-#define	MCFSIM2_GPIOINTENABLE	(MCF_MBAR2 + 0xc4)	/* GPIO intr enable */
-
-#define	MCFSIM2_INTLEVEL1	(MCF_MBAR2 + 0x140)	/* Intr level reg 1 */
-#define	MCFSIM2_INTLEVEL2	(MCF_MBAR2 + 0x144)	/* Intr level reg 2 */
-#define	MCFSIM2_INTLEVEL3	(MCF_MBAR2 + 0x148)	/* Intr level reg 3 */
-#define	MCFSIM2_INTLEVEL4	(MCF_MBAR2 + 0x14c)	/* Intr level reg 4 */
-#define	MCFSIM2_INTLEVEL5	(MCF_MBAR2 + 0x150)	/* Intr level reg 5 */
-#define	MCFSIM2_INTLEVEL6	(MCF_MBAR2 + 0x154)	/* Intr level reg 6 */
-#define	MCFSIM2_INTLEVEL7	(MCF_MBAR2 + 0x158)	/* Intr level reg 7 */
-#define	MCFSIM2_INTLEVEL8	(MCF_MBAR2 + 0x15c)	/* Intr level reg 8 */
-
-#define	MCFSIM2_DMAROUTE	(MCF_MBAR2 + 0x188)	/* DMA routing */
-
-#define	MCFSIM2_IDECONFIG1	(MCF_MBAR2 + 0x18c)	/* IDEconfig1 */
-#define	MCFSIM2_IDECONFIG2	(MCF_MBAR2 + 0x190)	/* IDEconfig2 */
-
-/*
- * Define the base interrupt for the second interrupt controller.
- * We set it to 128, out of the way of the base interrupts, and plenty
- * of room for its 64 interrupts.
- */
-#define	MCFINTC2_VECBASE	128
-
-#define	MCFINTC2_GPIOIRQ0	(MCFINTC2_VECBASE + 32)
-#define	MCFINTC2_GPIOIRQ1	(MCFINTC2_VECBASE + 33)
-#define	MCFINTC2_GPIOIRQ2	(MCFINTC2_VECBASE + 34)
-#define	MCFINTC2_GPIOIRQ3	(MCFINTC2_VECBASE + 35)
-#define	MCFINTC2_GPIOIRQ4	(MCFINTC2_VECBASE + 36)
-#define	MCFINTC2_GPIOIRQ5	(MCFINTC2_VECBASE + 37)
-#define	MCFINTC2_GPIOIRQ6	(MCFINTC2_VECBASE + 38)
-#define	MCFINTC2_GPIOIRQ7	(MCFINTC2_VECBASE + 39)
-
-/*
- * Generic GPIO support
- */
-#define MCFGPIO_PIN_MAX		64
-#define MCFGPIO_IRQ_MAX		-1
-#define MCFGPIO_IRQ_VECBASE	-1
-
-/****************************************************************************/
-
-#ifdef __ASSEMBLER__
-
-/*
- *	The M5249C3 board needs a little help getting all its SIM devices
- *	initialized at kernel start time. dBUG doesn't set much up, so
- *	we need to do it manually.
- */
-.macro m5249c3_setup
-	/*
-	 *	Set MBAR1 and MBAR2, just incase they are not set.
-	 */
-	movel	#0x10000001,%a0
-	movec	%a0,%MBAR			/* map MBAR region */
-	subql	#1,%a0				/* get MBAR address in a0 */
-
-	movel	#0x80000001,%a1
-	movec	%a1,#3086			/* map MBAR2 region */
-	subql	#1,%a1				/* get MBAR2 address in a1 */
-
-	/*
-	 *      Move secondary interrupts to their base (128).
-	 */
-	moveb	#MCFINTC2_VECBASE,%d0
-	moveb	%d0,0x16b(%a1)			/* interrupt base register */
-
-	/*
-	 *      Work around broken CSMR0/DRAM vector problem.
-	 */
-	movel	#0x001F0021,%d0			/* disable C/I bit */
-	movel	%d0,0x84(%a0)			/* set CSMR0 */
-
-	/*
-	 *	Disable the PLL firstly. (Who knows what state it is
-	 *	in here!).
-	 */
-	movel	0x180(%a1),%d0			/* get current PLL value */
-	andl	#0xfffffffe,%d0			/* PLL bypass first */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	nop
-
-#if CONFIG_CLOCK_FREQ == 140000000
-	/*
-	 *	Set initial clock frequency. This assumes M5249C3 board
-	 *	is fitted with 11.2896MHz crystal. It will program the
-	 *	PLL for 140MHz. Lets go fast :-)
-	 */
-	movel	#0x125a40f0,%d0			/* set for 140MHz */
-	movel	%d0,0x180(%a1)			/* set PLL register */
-	orl	#0x1,%d0
-	movel	%d0,0x180(%a1)			/* set PLL register */
-#endif
-
-	/*
-	 *	Setup CS1 for ethernet controller.
-	 *	(Setup as per M5249C3 doco).
-	 */
-	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
-	movel  %d0,0x8c(%a0)
-	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
-	movel  %d0,0x90(%a0)
-	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
-	movew  %d0,0x96(%a0)
-
-	/*
-	 *	Setup CS2 for IDE interface.
-	 */
-	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
-	movel	%d0,0x98(%a0)
-	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
-	movel	%d0,0x9c(%a0)
-	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
-	movew	%d0,0xa2(%a0)
-
-	movel	#0x00107000,%d0			/* IDEconfig1 */
-	movel	%d0,0x18c(%a1)
-	movel	#0x000c0400,%d0			/* IDEconfig2 */
-	movel	%d0,0x190(%a1)
-
-	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
-	orl	%d0,0xc(%a1)			/* function GPIO19 */
-	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
-        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
-.endm
-
-#define	PLATFORM_SETUP	m5249c3_setup
-
-#endif /* __ASSEMBLER__ */
-
-/****************************************************************************/
-#endif	/* m5249sim_h */
diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h
index acab61cb91ed..e33f5bb6aca8 100644
--- a/arch/m68k/include/asm/m525xsim.h
+++ b/arch/m68k/include/asm/m525xsim.h
@@ -12,6 +12,11 @@
 #define m525xsim_h
 /****************************************************************************/
 
+/*
+ *	This header supports ColdFire 5249, 5251 and 5253. There are a few
+ *	little differences between them, but most of the peripheral support
+ *	can be used by all of them.
+ */
 #define CPU_NAME		"COLDFIRE(m525x)"
 #define CPU_INSTR_PER_JIFFY	3
 #define MCF_BUSCLK		(MCF_CLK / 2)
@@ -65,6 +70,8 @@
 #define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
 #define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
 #define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
+#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
+#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
 
 /*
  * Secondary Interrupt Controller (in MBAR2)
@@ -101,11 +108,17 @@
 #define MCFQSPI_BASE		(MCF_MBAR + 0x300)	/* Base address QSPI */
 #define MCFQSPI_SIZE		0x40			/* Register set size */
 
-
+#ifdef CONFIG_M5249
+#define MCFQSPI_CS0		29
+#define MCFQSPI_CS1		24
+#define MCFQSPI_CS2		21
+#define MCFQSPI_CS3		22
+#else
 #define MCFQSPI_CS0		15
 #define MCFQSPI_CS1		16
 #define MCFQSPI_CS2		24
 #define MCFQSPI_CS3		28
+#endif
 
 /*
  *	I2C module.
@@ -115,6 +128,7 @@
 
 #define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base addreess I2C1 */
 #define MCFI2C_SIZE1		0x20			/* Register set size */
+
 /*
  *	DMA unit base addresses.
  */
@@ -163,6 +177,7 @@
 #define MCF_IRQ_GPIO4		(MCFINTC2_VECBASE + 36)
 #define MCF_IRQ_GPIO5		(MCFINTC2_VECBASE + 37)
 #define MCF_IRQ_GPIO6		(MCFINTC2_VECBASE + 38)
+#define MCF_IRQ_GPIO7		(MCFINTC2_VECBASE + 39)
 
 #define MCF_IRQ_USBWUP		(MCFINTC2_VECBASE + 40)
 #define MCF_IRQ_I2C1		(MCFINTC2_VECBASE + 62)
@@ -183,12 +198,111 @@
 #define MCFSIM2_GPIOINTCLEAR	(MCF_MBAR2 + 0xc0)	/* GPIO intr clear */
 #define MCFSIM2_GPIOINTENABLE	(MCF_MBAR2 + 0xc4)	/* GPIO intr enable */
 
+#define MCFSIM2_DMAROUTE	(MCF_MBAR2 + 0x188)     /* DMA routing */
+#define MCFSIM2_IDECONFIG1	(MCF_MBAR2 + 0x18c)	/* IDEconfig1 */
+#define MCFSIM2_IDECONFIG2	(MCF_MBAR2 + 0x190)	/* IDEconfig2 */
+
 /*
  * Generic GPIO support
  */
 #define MCFGPIO_PIN_MAX		64
+#ifdef CONFIG_M5249
+#define MCFGPIO_IRQ_MAX		-1
+#define MCFGPIO_IRQ_VECBASE	-1
+#else
 #define MCFGPIO_IRQ_MAX		7
 #define MCFGPIO_IRQ_VECBASE	MCF_IRQ_GPIO0
+#endif
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+#ifdef CONFIG_M5249C3
+/*
+ *	The M5249C3 board needs a little help getting all its SIM devices
+ *	initialized at kernel start time. dBUG doesn't set much up, so
+ *	we need to do it manually.
+ */
+.macro m5249c3_setup
+	/*
+	 *	Set MBAR1 and MBAR2, just incase they are not set.
+	 */
+	movel	#0x10000001,%a0
+	movec	%a0,%MBAR			/* map MBAR region */
+	subql	#1,%a0				/* get MBAR address in a0 */
+
+	movel	#0x80000001,%a1
+	movec	%a1,#3086			/* map MBAR2 region */
+	subql	#1,%a1				/* get MBAR2 address in a1 */
+
+	/*
+	 *      Move secondary interrupts to their base (128).
+	 */
+	moveb	#MCFINTC2_VECBASE,%d0
+	moveb	%d0,0x16b(%a1)			/* interrupt base register */
+
+	/*
+	 *      Work around broken CSMR0/DRAM vector problem.
+	 */
+	movel	#0x001F0021,%d0			/* disable C/I bit */
+	movel	%d0,0x84(%a0)			/* set CSMR0 */
+
+	/*
+	 *	Disable the PLL firstly. (Who knows what state it is
+	 *	in here!).
+	 */
+	movel	0x180(%a1),%d0			/* get current PLL value */
+	andl	#0xfffffffe,%d0			/* PLL bypass first */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	nop
+
+#if CONFIG_CLOCK_FREQ == 140000000
+	/*
+	 *	Set initial clock frequency. This assumes M5249C3 board
+	 *	is fitted with 11.2896MHz crystal. It will program the
+	 *	PLL for 140MHz. Lets go fast :-)
+	 */
+	movel	#0x125a40f0,%d0			/* set for 140MHz */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	orl	#0x1,%d0
+	movel	%d0,0x180(%a1)			/* set PLL register */
+#endif
+
+	/*
+	 *	Setup CS1 for ethernet controller.
+	 *	(Setup as per M5249C3 doco).
+	 */
+	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
+	movel  %d0,0x8c(%a0)
+	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
+	movel  %d0,0x90(%a0)
+	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
+	movew  %d0,0x96(%a0)
+
+	/*
+	 *	Setup CS2 for IDE interface.
+	 */
+	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
+	movel	%d0,0x98(%a0)
+	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
+	movel	%d0,0x9c(%a0)
+	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
+	movew	%d0,0xa2(%a0)
+
+	movel	#0x00107000,%d0			/* IDEconfig1 */
+	movel	%d0,0x18c(%a1)
+	movel	#0x000c0400,%d0			/* IDEconfig2 */
+	movel	%d0,0x190(%a1)
+
+	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
+	orl	%d0,0xc(%a1)			/* function GPIO19 */
+	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
+        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
+.endm
+
+#define	PLATFORM_SETUP	m5249c3_setup
 
+#endif /* CONFIG_M5249C3 */
+#endif /* __ASSEMBLER__ */
 /****************************************************************************/
 #endif	/* m525xsim_h */
diff --git a/arch/m68k/include/asm/mcfclk.h b/arch/m68k/include/asm/mcfclk.h
index b676a02bb392..ea4791e3a557 100644
--- a/arch/m68k/include/asm/mcfclk.h
+++ b/arch/m68k/include/asm/mcfclk.h
@@ -8,7 +8,6 @@
 
 struct clk;
 
-#ifdef MCFPM_PPMCR0
 struct clk_ops {
 	void (*enable)(struct clk *);
 	void (*disable)(struct clk *);
@@ -23,6 +22,8 @@ struct clk {
 };
 
 extern struct clk *mcf_clks[];
+
+#ifdef MCFPM_PPMCR0
 extern struct clk_ops clk_ops0;
 #ifdef MCFPM_PPMCR1
 extern struct clk_ops clk_ops1;
@@ -38,6 +39,12 @@ static struct clk __clk_##clk_bank##_##clk_slot = { \
 
 void __clk_init_enabled(struct clk *);
 void __clk_init_disabled(struct clk *);
+#else
+#define DEFINE_CLK(clk_ref, clk_name, clk_rate) \
+        static struct clk clk_##clk_ref = { \
+                .name = clk_name, \
+                .rate = clk_rate, \
+        }
 #endif /* MCFPM_PPMCR0 */
 
 #endif /* mcfclk_h */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
index 7a83e619e73b..a04fd9b2714c 100644
--- a/arch/m68k/include/asm/mcfsim.h
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -24,10 +24,7 @@
 #elif defined(CONFIG_M523x)
 #include <asm/m523xsim.h>
 #include <asm/mcfintc.h>
-#elif defined(CONFIG_M5249)
-#include <asm/m5249sim.h>
-#include <asm/mcfintc.h>
-#elif defined(CONFIG_M525x)
+#elif defined(CONFIG_M5249) || defined(CONFIG_M525x)
 #include <asm/m525xsim.h>
 #include <asm/mcfintc.h>
 #elif defined(CONFIG_M527x)
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index 90595721185f..ef209169579a 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -26,7 +26,7 @@ extern unsigned long memory_end;
 #define pfn_to_virt(pfn)	__va((pfn) << PAGE_SHIFT)
 
 #define virt_to_page(addr)	(mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
-#define page_to_virt(page)	((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+#define page_to_virt(page)	__va(((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET))
 
 #define pfn_to_page(pfn)	virt_to_page(pfn_to_virt(pfn))
 #define page_to_pfn(page)	virt_to_pfn(page_to_virt(page))