[PATCH] CRIS update: new subarchitecture v32

New CRIS sub architecture named v32.

From: Dave Jones <davej@redhat.com>

	Fix swapped kmalloc args

Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 160 insertions, 0 deletions

diff --git a/arch/cris/arch-v32/kernel/traps.c b/arch/cris/arch-v32/kernel/traps.c
new file mode 100644
index 000000000000..6e3787045560
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/traps.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2003, Axis Communications AB.
+ */
+
+#include <linux/config.h>
+#include <linux/ptrace.h>
+#include <asm/uaccess.h>
+
+#include <asm/arch/hwregs/supp_reg.h>
+
+extern void reset_watchdog(void);
+extern void stop_watchdog(void);
+
+extern int raw_printk(const char *fmt, ...);
+
+void
+show_registers(struct pt_regs *regs)
+{
+	/*
+	 * It's possible to use either the USP register or current->thread.usp.
+	 * USP might not correspond to the current proccess for all cases this
+	 * function is called, and current->thread.usp isn't up to date for the
+	 * current proccess. Experience shows that using USP is the way to go.
+	 */
+	unsigned long usp;
+	unsigned long d_mmu_cause;
+	unsigned long i_mmu_cause;
+
+	usp = rdusp();
+
+	raw_printk("CPU: %d\n", smp_processor_id());
+
+	raw_printk("ERP: %08lx SRP: %08lx  CCS: %08lx USP: %08lx MOF: %08lx\n",
+		regs->erp, regs->srp, regs->ccs, usp, regs->mof);
+
+	raw_printk(" r0: %08lx  r1: %08lx   r2: %08lx  r3: %08lx\n",
+		regs->r0, regs->r1, regs->r2, regs->r3);
+
+	raw_printk(" r4: %08lx  r5: %08lx   r6: %08lx  r7: %08lx\n",
+		regs->r4, regs->r5, regs->r6, regs->r7);
+
+	raw_printk(" r8: %08lx  r9: %08lx  r10: %08lx r11: %08lx\n",
+		regs->r8, regs->r9, regs->r10, regs->r11);
+
+	raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n",
+		regs->r12, regs->r13, regs->orig_r10, regs->acr);
+
+	raw_printk("sp: %08lx\n", regs);
+
+	SUPP_BANK_SEL(BANK_IM);
+	SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause);
+
+	SUPP_BANK_SEL(BANK_DM);
+	SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause);
+
+	raw_printk("       Data MMU Cause: %08lx\n", d_mmu_cause);
+	raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause);
+
+	raw_printk("Process %s (pid: %d, stackpage: %08lx)\n",
+		current->comm, current->pid, (unsigned long) current);
+
+	/* Show additional info if in kernel-mode. */
+	if (!user_mode(regs)) {
+		int i;
+		unsigned char c;
+
+		show_stack(NULL, (unsigned long *) usp);
+
+		/*
+		 * If the previous stack-dump wasn't a kernel one, dump the
+		 * kernel stack now.
+		 */
+		if (usp != 0)
+			show_stack(NULL, NULL);
+
+		raw_printk("\nCode: ");
+
+		if (regs->erp < PAGE_OFFSET)
+			goto bad_value;
+
+		/*
+		 * Quite often the value at regs->erp doesn't point to the
+		 * interesting instruction, which often is the previous
+		 * instruction. So dump at an offset large enough that the
+		 * instruction decoding should be in sync at the interesting
+		 * point, but small enough to fit on a row. The regs->erp
+		 * location is pointed out in a ksymoops-friendly way by
+		 * wrapping the byte for that address in parenthesis.
+		 */
+		for (i = -12; i < 12; i++) {
+			if (__get_user(c, &((unsigned char *) regs->erp)[i])) {
+bad_value:
+				raw_printk(" Bad IP value.");
+				break;
+			}
+
+			if (i == 0)
+				raw_printk("(%02x) ", c);
+			else
+				raw_printk("%02x ", c);
+		}
+
+		raw_printk("\n");
+	}
+}
+
+/*
+ * This gets called from entry.S when the watchdog has bitten. Show something
+ * similiar to an Oops dump, and if the kernel if configured to be a nice doggy;
+ * halt instead of reboot.
+ */
+void
+watchdog_bite_hook(struct pt_regs *regs)
+{
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	local_irq_disable();
+	stop_watchdog();
+	show_registers(regs);
+
+	while (1)
+		; /* Do nothing. */
+#else
+	show_registers(regs);
+#endif
+}
+
+/* This is normally the Oops function. */
+void
+die_if_kernel(const char *str, struct pt_regs *regs, long err)
+{
+	if (user_mode(regs))
+		return;
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	/*
+	 * This printout might take too long and could trigger
+	 * the watchdog normally. If NICE_DOGGY is set, simply
+	 * stop the watchdog during the printout.
+	 */
+	stop_watchdog();
+#endif
+
+	raw_printk("%s: %04lx\n", str, err & 0xffff);
+
+	show_registers(regs);
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+	reset_watchdog();
+#endif
+
+	do_exit(SIGSEGV);
+}
+
+void arch_enable_nmi(void)
+{
+	unsigned long flags;
+	local_save_flags(flags);
+	flags |= (1<<30); /* NMI M flag is at bit 30 */
+	local_irq_restore(flags);
+}