Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits)
  Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks
  Blackfin arch: Fix bogus str_ident check in gpio code
  Blackfin arch: AD7879 Touchscreen driver
  Blackfin arch: introducing bfin_addr_dcachable
  Blackfin arch: fix a typo in comments
  Blackfin arch: Remove useless head file
  Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542)
  Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible
  Blackfin arch: update anomaly headers to match the latest sheet
  Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart()
  Blackfin arch: print out error/warning if you are running on the incorrect CPU type
  Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts
  Blackfin arch: update board defconfigs
  Blackfin arch: Add optional verbose debug
  Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface
  Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1)
  Blackfin arch: ptrace - fix off-by-one check on end of memory regions
  Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display
  Blackfin arch: flash memory map and dm9000 resources updating
  Blackfin arch: early prink code still use uart core console functions to parse and set configure option string
  ...

6 files changed, 177 insertions, 87 deletions

diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index ce934ee174e0..24192aaa9275 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -36,11 +36,8 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
 #include <asm/bfin5xx_spi.h>
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
@@ -175,6 +172,7 @@ static struct resource bfin_uart_resources[] = {
 	{
 		.start = 0xFFC03100,
 		.end = 0xFFC031FF,
+		.flags = IORESOURCE_MEM,
 	},
 #endif
 };
@@ -268,6 +266,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PH6,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -276,7 +284,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -321,12 +329,12 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",
-		.offset = 4 * SIZE_1M,
-		.size = (256 - 4) * SIZE_1M,
+		.offset = 4 * 1024 * 1024,
+		.size = (256 - 4) * 1024 * 1024,
 	},
 };
 
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 39357693046d..5288187a3ace 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -38,11 +38,8 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 #include <linux/usb/musb.h>
-#endif
 #include <asm/bfin5xx_spi.h>
-#include <asm/cplb.h>
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
@@ -186,6 +183,37 @@ static struct platform_device bf54x_kpad_device = {
 };
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#include <asm/bfin_rotary.h>
+
+static struct bfin_rotary_platform_data bfin_rotary_data = {
+	/*.rotary_up_key     = KEY_UP,*/
+	/*.rotary_down_key   = KEY_DOWN,*/
+	.rotary_rel_code   = REL_WHEEL,
+	.rotary_button_key = KEY_ENTER,
+	.debounce	   = 10,	/* 0..17 */
+	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
+};
+
+static struct resource bfin_rotary_resources[] = {
+	{
+		.start = IRQ_CNT,
+		.end = IRQ_CNT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_rotary_device = {
+	.name		= "bfin-rotary",
+	.id		= -1,
+	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
+	.resource 	= bfin_rotary_resources,
+	.dev		= {
+		.platform_data = &bfin_rotary_data,
+	},
+};
+#endif
+
 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
@@ -314,6 +342,16 @@ static struct resource musb_resources[] = {
 	},
 };
 
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= 0,
+	.dyn_fifo	= 0,
+	.soft_con	= 1,
+	.dma		= 1,
+	.num_eps	= 7,
+	.dma_channels	= 7,
+	.gpio_vrsel	= GPIO_PE7,
+};
+
 static struct musb_hdrc_platform_data musb_plat = {
 #if defined(CONFIG_USB_MUSB_OTG)
 	.mode		= MUSB_OTG,
@@ -322,7 +360,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 	.mode		= MUSB_PERIPHERAL,
 #endif
-	.multipoint	= 0,
+	.config		= &musb_config,
 };
 
 static u64 musb_dmamask = ~(u32)0;
@@ -367,7 +405,7 @@ static struct mtd_partition partition_info[] = {
 	{
 		.name = "linux kernel(nand)",
 		.offset = 0,
-		.size = 4 * SIZE_1M,
+		.size = 4 * 1024 * 1024,
 	},
 	{
 		.name = "file system(nand)",
@@ -424,7 +462,7 @@ static struct mtd_partition ezkit_partitions[] = {
 		.offset     = 0,
 	}, {
 		.name       = "linux kernel(nor)",
-		.size       = 0x1C0000,
+		.size       = 0x400000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
 		.name       = "file system(nor)",
@@ -441,7 +479,7 @@ static struct physmap_flash_data ezkit_flash_data = {
 
 static struct resource ezkit_flash_resource = {
 	.start = 0x20000000,
-	.end   = 0x20ffffff,
+	.end   = 0x21ffffff,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -551,7 +589,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 {
 	.modalias		= "ad7877",
 	.platform_data		= &bfin_ad7877_ts_info,
-	.irq			= IRQ_PJ11,
+	.irq			= IRQ_PJ11,	/* newer boards (Rev 1.4+) use IRQ_PB4 */
 	.max_speed_hz		= 12500000,     /* max spi clock (SCK) speed in HZ */
 	.bus_num		= 0,
 	.chip_select  		= 2,
@@ -810,6 +848,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bf54x_kpad_device,
 #endif
 
+#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+	&bfin_rotary_device,
+#endif
+
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 	&i2c_bfin_twi0_device,
 #if !defined(CONFIG_BF542)
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index 4d5cfeacb123..051b05c88027 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -73,25 +73,19 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-#if defined(CONFIG_BF54x)
+	/* enable self refresh via SRREQ */
 	P2.H = hi(EBIU_RSTCTL);
 	P2.L = lo(EBIU_RSTCTL);
 	R0 = [P2];
 	BITSET (R0, 3);
-#else
-	P2.H = hi(EBIU_SDGCTL);
-	P2.L = lo(EBIU_SDGCTL);
-	R0 = [P2];
-	BITSET (R0, 24);
-#endif
 	[P2] = R0;
 	SSYNC;
-#if defined(CONFIG_BF54x)
+
+	/* wait for SRACK bit to be set */
 .LSRR_MODE:
 	R0 = [P2];
 	CC = BITTST(R0, 4);
 	if !CC JUMP .LSRR_MODE;
-#endif
 
 	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
 	r0 = r0 << 9;                    /* Shift it over,                  */
@@ -100,6 +94,9 @@ ENTRY(_start_dma_code)
 	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
 	r1 = r1 << 8;                    /* Shift it over                   */
 	r0 = r1 | r0;                    /* add them all together           */
+#ifdef ANOMALY_05000265
+	r0 = BITSET(r0, 15);             /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
 
 	p0.h = hi(PLL_CTL);
 	p0.l = lo(PLL_CTL);              /* Load the address                */
@@ -123,7 +120,7 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-#if defined(CONFIG_BF54x)
+	/* disable self refresh by clearing SRREQ */
 	P2.H = hi(EBIU_RSTCTL);
 	P2.L = lo(EBIU_RSTCTL);
 	R0 = [P2];
@@ -155,41 +152,6 @@ ENTRY(_start_dma_code)
 	r0.h = hi(mem_DDRCTL2);
 	[p0] = r0;
 	ssync;
-#else
-	p0.l = lo(EBIU_SDRRC);
-	p0.h = hi(EBIU_SDRRC);
-	r0 = mem_SDRRC;
-	w[p0] = r0.l;
-	ssync;
-
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
-	P2.H = hi(EBIU_SDGCTL);
-	P2.L = lo(EBIU_SDGCTL);
-	R0 = [P2];
-	BITCLR (R0, 24);
-	p0.h = hi(EBIU_SDSTAT);
-	p0.l = lo(EBIU_SDSTAT);
-	r2.l = w[p0];
-	cc = bittst(r2,3);
-	if !cc jump .Lskip;
-	NOP;
-	BITSET (R0, 23);
-.Lskip:
-	[P2] = R0;
-	SSYNC;
-
-	R0.L = lo(mem_SDGCTL);
-	R0.H = hi(mem_SDGCTL);
-	R1 = [p2];
-	R1 = R1 | R0;
-	[P2] = R1;
-	SSYNC;
-#endif
 
 	RTS;
 ENDPROC(_start_dma_code)
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 3ad59655881a..816b09278f62 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -2,18 +2,18 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision E, 11/28/2007; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
 
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
 /* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
 #define ANOMALY_05000119 (1)
@@ -36,14 +36,14 @@
 /* TWI Slave Boot Mode Is Not Functional */
 #define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
 /* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000325 (__SILICON_REVISION__ < 1)
+#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
 /* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
 #define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
 #define ANOMALY_05000328 (__SILICON_REVISION__ < 1)
 /* Synchronous Burst Flash Boot Mode Is Not Functional */
 #define ANOMALY_05000329 (__SILICON_REVISION__ < 1)
-/* Host DMA Boot Mode Is Not Functional */
+/* Host DMA Boot Modes Are Not Functional */
 #define ANOMALY_05000330 (__SILICON_REVISION__ < 1)
 /* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
 #define ANOMALY_05000334 (__SILICON_REVISION__ < 1)
@@ -61,26 +61,102 @@
 #define ANOMALY_05000344 (__SILICON_REVISION__ < 1)
 /* USB Calibration Value Is Not Intialized */
 #define ANOMALY_05000346 (__SILICON_REVISION__ < 1)
-/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+/* USB Calibration Value to use */
+#define ANOMALY_05000346_value 0x5411
+/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
 #define ANOMALY_05000347 (__SILICON_REVISION__ < 1)
 /* Data Lost when Core Reads SDH Data FIFO */
 #define ANOMALY_05000349 (__SILICON_REVISION__ < 1)
 /* PLL Status Register Is Inaccurate */
 #define ANOMALY_05000351 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
+#define ANOMALY_05000353 (__SILICON_REVISION__ < 2)
+/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
+#define ANOMALY_05000355 (__SILICON_REVISION__ < 1)
+/* System Stalled During A Core Access To AMC While A Core Access To NFC FIFO Is Required */
+#define ANOMALY_05000356 (__SILICON_REVISION__ < 1)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
 #define ANOMALY_05000357 (1)
 /* External Memory Read Access Hangs Core With PLL Bypass */
 #define ANOMALY_05000360 (1)
 /* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
 #define ANOMALY_05000365 (1)
+/* WURESET Bit In SYSCR Register Does Not Properly Indicate Hibernate Wake-Up */
+#define ANOMALY_05000367 (__SILICON_REVISION__ < 1)
 /* Addressing Conflict between Boot ROM and Asynchronous Memory */
 #define ANOMALY_05000369 (1)
+/* Default PLL MSEL and SSEL Settings Can Cause 400MHz Product To Violate Specifications */
+#define ANOMALY_05000370 (__SILICON_REVISION__ < 1)
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
+/* USB DP/DM Data Pins May Lose State When Entering Hibernate */
+#define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
 /* Mobile DDR Operation Not Functional */
 #define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
-#define ANOMALY_05000378 (1)
+#define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
+/* 16-Bit NAND FLASH Boot Mode Is Not Functional */
+#define ANOMALY_05000379 (1)
+/* 8-Bit NAND Flash Boot Mode Not Functional */
+#define ANOMALY_05000382 (__SILICON_REVISION__ < 1)
+/* Some ATAPI Modes Are Not Functional */
+#define ANOMALY_05000383 (1)
+/* Boot from OTP Memory Not Functional */
+#define ANOMALY_05000385 (__SILICON_REVISION__ < 1)
+/* bfrom_SysControl() Firmware Routine Not Functional */
+#define ANOMALY_05000386 (__SILICON_REVISION__ < 1)
+/* Programmable Preboot Settings Not Functional */
+#define ANOMALY_05000387 (__SILICON_REVISION__ < 1)
+/* CRC32 Checksum Support Not Functional */
+#define ANOMALY_05000388 (__SILICON_REVISION__ < 1)
+/* Reset Vector Must Not Be in SDRAM Memory Space */
+#define ANOMALY_05000389 (__SILICON_REVISION__ < 1)
+/* Changed Meaning of BCODE Field in SYSCR Register */
+#define ANOMALY_05000390 (__SILICON_REVISION__ < 1)
+/* Repeated Boot from Page-Mode or Burst-Mode Flash Memory May Fail */
+#define ANOMALY_05000391 (__SILICON_REVISION__ < 1)
+/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000392 (__SILICON_REVISION__ < 1)
+/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
+#define ANOMALY_05000393 (__SILICON_REVISION__ < 1)
+/* Log Buffer Not Functional */
+#define ANOMALY_05000394 (__SILICON_REVISION__ < 1)
+/* Hook Routine Not Functional */
+#define ANOMALY_05000395 (__SILICON_REVISION__ < 1)
+/* Header Indirect Bit Not Functional */
+#define ANOMALY_05000396 (__SILICON_REVISION__ < 1)
+/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
+#define ANOMALY_05000397 (__SILICON_REVISION__ < 1)
+/* Lockbox SESR Disallows Certain User Interrupts */
+#define ANOMALY_05000404 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox SESR Argument Checking Does Not Check L2 Memory Protection Range */
+#define ANOMALY_05000406 (__SILICON_REVISION__ < 2)
+/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
+#define ANOMALY_05000407 (__SILICON_REVISION__ < 2)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Lockbox firmware leaves MDMA0 channel enabled */
+#define ANOMALY_05000409 (__SILICON_REVISION__ < 2)
+/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
+#define ANOMALY_05000411 (__SILICON_REVISION__ < 2)
+/* NAND Boot Mode Not Compatible With Some NAND Flash Devices */
+#define ANOMALY_05000413 (__SILICON_REVISION__ < 2)
+/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
+#define ANOMALY_05000414 (__SILICON_REVISION__ < 2)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause Spurious Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* CORE_EPPI_PRIO bit and SYS_EPPI_PRIO bit in the HMDMA1_CONTROL register are not functional */
+#define ANOMALY_05000427 (__SILICON_REVISION__ < 2)
+/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Behaves as a Buffer Status Bit Instead of an IRQ Status Bit */
+#define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -93,6 +169,7 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index e748588e8930..49f9b403d458 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -30,8 +30,6 @@
 #ifndef __MACH_BF548_H__
 #define __MACH_BF548_H__
 
-#define SUPPORTED_REVID 0
-
 #define OFFSET_(x) ((x) & 0x0000FFFF)
 
 /*some misc defines*/
@@ -108,20 +106,23 @@
 
 #if defined(CONFIG_BF542)
 # define CPU   "BF542"
-# define CPUID 0x027c8000
+# define CPUID 0x27de
 #elif defined(CONFIG_BF544)
-# define CPU "BF544"
-# define CPUID 0x027c8000
+# define CPU   "BF544"
+# define CPUID 0x27de
 #elif defined(CONFIG_BF547)
-# define CPU "BF547"
+# define CPU   "BF547"
+# define CPUID 0x27de
 #elif defined(CONFIG_BF548)
-# define CPU "BF548"
-# define CPUID 0x027c6000
+# define CPU   "BF548"
+# define CPUID 0x27de
 #elif defined(CONFIG_BF549)
-# define CPU "BF549"
-#else
-# define CPU "UNKNOWN"
-# define CPUID 0x0
+# define CPU   "BF549"
+# define CPUID 0x27de
+#endif
+
+#ifndef CPU
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
 #endif
 
 #endif	/* __MACH_BF48_H__  */
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
index f99f47bc3a07..a2228428dc06 100644
--- a/arch/blackfin/mach-bf548/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
@@ -94,13 +94,13 @@
 #endif /*CONFIG_BFIN_DCACHE*/
 
 /* Level 2 Memory */
-#if !defined(CONFIG_BF542)
-# define L2_START          0xFEB00000
-# if defined(CONFIG_BF544)
-#  define L2_LENGTH        0x10000
-# else
-#  define L2_LENGTH        0x20000
-# endif
+#define L2_START            0xFEB00000
+#if defined(CONFIG_BF542)
+# define L2_LENGTH          0
+#elif defined(CONFIG_BF544)
+# define L2_LENGTH          0x10000
+#else
+# define L2_LENGTH          0x20000
 #endif
 
 /* Scratch Pad Memory */