blackfin: twi: move twi bit mask macro to twi head file

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

1 files changed, 0 insertions, 71 deletions

diff --git a/arch/blackfin/mach-bf518/include/mach/defBF512.h b/arch/blackfin/mach-bf518/include/mach/defBF512.h
index 729704078cd7..a818bb15cf0d 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF512.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF512.h
@@ -1083,77 +1083,6 @@
 #define ERR_NCOR		0x8000		/* Error Not Corrected Indicator	*/
 
 
-/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
-#define	CLKLOW(x)	((x) & 0xFF)		/* Periods Clock Is Held Low			*/
-#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low			*/
-
-/* TWI_PRESCALE Masks															*/
-#define	PRESCALE	0x007F		/* SCLKs Per Internal Time Reference (10MHz)	*/
-#define	TWI_ENA		0x0080		/* TWI Enable									*/
-#define	SCCB		0x0200		/* SCCB Compatibility Enable					*/
-
-/* TWI_SLAVE_CTL Masks															*/
-#define	SEN			0x0001		/* Slave Enable									*/
-#define	SADD_LEN	0x0002		/* Slave Address Length							*/
-#define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
-#define	NAK			0x0008		/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010		/* General Call Adrress Matching Enabled		*/
-
-/* TWI_SLAVE_STAT Masks															*/
-#define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
-#define GCALL		0x0002		/* General Call Indicator						*/
-
-/* TWI_MASTER_CTL Masks													*/
-#define	MEN			0x0001		/* Master Mode Enable						*/
-#define	MADD_LEN	0x0002		/* Master Address Length					*/
-#define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*)		*/
-#define	FAST		0x0008		/* Use Fast Mode Timing Specs				*/
-#define	STOP		0x0010		/* Issue Stop Condition						*/
-#define	RSTART		0x0020		/* Repeat Start or Stop* At End Of Transfer	*/
-#define	DCNT		0x3FC0		/* Data Bytes To Transfer					*/
-#define	SDAOVR		0x4000		/* Serial Data Override						*/
-#define	SCLOVR		0x8000		/* Serial Clock Override					*/
-
-/* TWI_MASTER_STAT Masks														*/
-#define	MPROG		0x0001		/* Master Transfer In Progress					*/
-#define	LOSTARB		0x0002		/* Lost Arbitration Indicator (Xfer Aborted)	*/
-#define	ANAK		0x0004		/* Address Not Acknowledged						*/
-#define	DNAK		0x0008		/* Data Not Acknowledged						*/
-#define	BUFRDERR	0x0010		/* Buffer Read Error							*/
-#define	BUFWRERR	0x0020		/* Buffer Write Error							*/
-#define	SDASEN		0x0040		/* Serial Data Sense							*/
-#define	SCLSEN		0x0080		/* Serial Clock Sense							*/
-#define	BUSBUSY		0x0100		/* Bus Busy Indicator							*/
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
-#define	SINIT		0x0001		/* Slave Transfer Initiated	*/
-#define	SCOMP		0x0002		/* Slave Transfer Complete	*/
-#define	SERR		0x0004		/* Slave Transfer Error		*/
-#define	SOVF		0x0008		/* Slave Overflow			*/
-#define	MCOMP		0x0010		/* Master Transfer Complete	*/
-#define	MERR		0x0020		/* Master Transfer Error	*/
-#define	XMTSERV		0x0040		/* Transmit FIFO Service	*/
-#define	RCVSERV		0x0080		/* Receive FIFO Service		*/
-
-/* TWI_FIFO_CTRL Masks												*/
-#define	XMTFLUSH	0x0001		/* Transmit Buffer Flush			*/
-#define	RCVFLUSH	0x0002		/* Receive Buffer Flush				*/
-#define	XMTINTLEN	0x0004		/* Transmit Buffer Interrupt Length	*/
-#define	RCVINTLEN	0x0008		/* Receive Buffer Interrupt Length	*/
-
-/* TWI_FIFO_STAT Masks															*/
-#define	XMTSTAT		0x0003		/* Transmit FIFO Status							*/
-#define	XMT_EMPTY	0x0000		/* 		Transmit FIFO Empty						*/
-#define	XMT_HALF	0x0001		/* 		Transmit FIFO Has 1 Byte To Write		*/
-#define	XMT_FULL	0x0003		/* 		Transmit FIFO Full (2 Bytes To Write)	*/
-
-#define	RCVSTAT		0x000C		/* Receive FIFO Status							*/
-#define	RCV_EMPTY	0x0000		/* 		Receive FIFO Empty						*/
-#define	RCV_HALF	0x0004		/* 		Receive FIFO Has 1 Byte To Read			*/
-#define	RCV_FULL	0x000C		/* 		Receive FIFO Full (2 Bytes To Read)		*/
-
-
 /*  *******************  PIN CONTROL REGISTER MASKS  ************************/
 /* PORT_MUX Masks															*/
 #define	PJSE			0x0001			/* Port J SPI/SPORT Enable			*/