Merge tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Ux500 DTS updates for the v5.7 kernel:
- Fix some DSI nodes
- Add GT-S7710 DTS file

* tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: Add devicetree for Samsung GT-S7710
  ARM: dts: ux500: Fix up DSI controller nodes

Link: https://lore.kernel.org/r/CACRpkdb8T9CZYvYEFYnQTOMoXGsn43N8TgKfvoJZjTwRHW6zhQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

5 files changed, 588 insertions, 6 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a3812a042339..94bee1bbc27d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1205,7 +1205,8 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-hrefv60plus-stuib.dtb \
 	ste-hrefv60plus-tvk.dtb \
 	ste-href520-tvk.dtb \
-	ste-ux500-samsung-golden.dtb
+	ste-ux500-samsung-golden.dtb \
+	ste-ux500-samsung-skomer.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ld4-ref.dtb \
 	uniphier-ld6b-ref.dtb \
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 6671f74c9f03..3e10da3f8fd3 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1097,7 +1097,7 @@
 			ranges;
 			status = "disabled";
 
-			dsi0: dsi@a0351000 {
+			dsi0: dsi-controller@a0351000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0351000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
@@ -1105,7 +1105,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi1: dsi@a0352000 {
+			dsi1: dsi-controller@a0352000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0352000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
@@ -1113,7 +1113,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi2: dsi@a0353000 {
+			dsi2: dsi-controller@a0353000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0353000 0x1000>;
 				/* This DSI port only has the Low Power / Energy Save clock */
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
index e024520f4d47..de82b9db956f 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi
@@ -66,7 +66,7 @@
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "samsung,s6d16d0";
 					reg = <0>;
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
index cb3677f0a1cb..9f285c7cf914 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi
@@ -45,7 +45,7 @@
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "sony,acx424akp";
 					reg = <0>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
new file mode 100644
index 000000000000..45a81cec0c6e
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung XCover 2 GT-S7710 also known as Skomer.
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung XCover 2 (GT-S7710)";
+	compatible = "samsung,skomer", "st-ericsson,u8500";
+
+	chosen {
+		stdout-path = &serial2;
+	};
+
+	/* TI TXS0206 level translator for 2.9 V */
+	sd_level_translator: regulator-gpio {
+		compatible = "regulator-fixed";
+
+		/* GPIO87 EN */
+		gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-name = "sd-level-translator";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+
+		startup-delay-us = <200>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_level_translator_default>;
+	};
+
+	/* External LDO MIC5366-3.3YMT for eMMC */
+	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_ldo_en_default_mode>;
+	};
+
+	wlan_en: regulator-gpio-wlan-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-reg-on";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		startup-delay-us = <200000>;
+		/* GPIO215 WLAN_EN */
+		gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_default_mode>;
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_default_mode>;
+
+		button-home {
+			linux,code = <KEY_HOME>;
+			label = "HOME";
+			/* GPIO91 */
+			gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+		};
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "VOL+";
+			/* GPIO67 */
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "VOL-";
+			/* GPIO92 */
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		};
+		button-menu {
+			linux,code = <KEY_MENU>;
+			label = "MENU";
+			/* GPIO204 */
+			gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+		};
+		button-back {
+			linux,code = <KEY_BACK>;
+			label = "BACK";
+			/* GPIO205 */
+			gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * FIXME: this is not quite GPIO backlight. This is a
+	 * KTD253 one-wire GPIO-controlled backlight. It can
+	 * work as a GPIO backlight.
+	 */
+	gpio_bl: backlight {
+		compatible = "gpio-backlight";
+		/* GPIO 69 */
+		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_backlight_default_mode>;
+	};
+
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the NCP6914 Camera power management unit */
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* TODO: this should be used by the ALPS HSCDTD008A compass sensor */
+	};
+
+	soc {
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			/* All direction control is used */
+			st,sig-dir-cmd;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-pin-fbclk;
+			full-pwr-cycle;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&sd_level_translator>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc0_a_1_default>;
+			pinctrl-1 = <&mc0_a_1_sleep>;
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			non-removable;
+			cap-sd-highspeed;
+			vmmc-supply = <&wlan_en>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc1_a_2_default>;
+			pinctrl-1 = <&mc1_a_2_sleep>;
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wifi@1 {
+				compatible = "brcm,bcm4329-fmac";
+				reg = <1>;
+				/* GPIO216 WL_HOST_WAKE */
+				interrupt-parent = <&gpio6>;
+				interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-names = "host-wake";
+				pinctrl-names = "default";
+				pinctrl-0 = <&wlan_default_mode>;
+			};
+		};
+
+		// eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			non-removable;
+			cap-mmc-highspeed;
+			mmc-ddr-1_8v;
+			vmmc-supply = <&ldo_3v3_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&mc2_a_1_default>;
+			pinctrl-1 = <&mc2_a_1_sleep>;
+
+			status = "okay";
+		};
+
+		/* GBF (Bluetooth) UART */
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u0_a_1_default>;
+			pinctrl-1 = <&u0_a_1_sleep>;
+			status = "okay";
+
+			/* FIXME: not quite working yet, probably needs regulators */
+			bluetooth {
+				compatible = "brcm,bcm4330-bt";
+				shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bluetooth_default_mode>;
+			};
+		};
+
+		/* GPF UART */
+		uart@80121000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+			pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+		};
+
+		/* Debugging console UART connected to AB8505 USB */
+		uart@80007000 {
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&u2rxtx_c_1_default>;
+			pinctrl-1 = <&u2rxtx_c_1_sleep>;
+		};
+
+		prcmu@80157000 {
+			ab8505 {
+				ab8500_usb {
+					pinctrl-names = "default", "sleep";
+					pinctrl-0 = <&usb_a_1_default>;
+					pinctrl-1 = <&usb_a_1_sleep>;
+				};
+
+				ab8505-regulators {
+					ab8500_ldo_aux1 {
+						/* Used for VDD for sensors */
+						regulator-name = "AUX1";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux2 {
+						/* Supplies the Cypress TMA140 touchscreen only with 3.3V */
+						regulator-name = "AUX2";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux3 {
+						/* Used for voltage for external MMC/SD card */
+						regulator-name = "AUX3";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ab8500_ldo_aux4 {
+						regulator-name = "AUX4";
+						/* Hammer to 3.0V for the display */
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					ab8500_ldo_aux5 {
+						regulator-name = "AUX5";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <2790000>;
+						regulator-always-on;
+					};
+
+					ab8500_ldo_aux6 {
+						regulator-name = "AUX6";
+						/* Hammer to 1.8V for the display */
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ab8500_ldo_aux8 {
+						/* Mostly VIO for sensors */
+						regulator-name = "AUX8";
+					};
+				};
+			};
+		};
+
+		/* I2C0 */
+		i2c@80004000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@44 {
+				compatible = "sharp,gp2ap002s00f";
+				clock-frequency = <400000>;
+				reg = <0x44>;
+
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gp2ap002_skomer_default>;
+				sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>;
+				sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>;
+			};
+		};
+
+
+		/* I2C2 */
+		i2c@80128000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_b_2_default>;
+			pinctrl-1 = <&i2c2_b_2_sleep>;
+
+			accel@18 {
+				compatible = "bosch,bma254";
+				clock-frequency = <400000>;
+				reg = <0x18>;
+
+				/* GPIO224 used as "smart alert" interrupt */
+				interrupt-parent = <&gpio7>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+
+				mount-matrix = "0", "1", "0",
+					       "-1", "0", "0",
+					       "0", "0", "1";
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&ab8500_ldo_aux8_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&bma254_skomer_default>;
+			};
+		};
+
+		/* I2C3 */
+		i2c@80110000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_c_2_default>;
+			pinctrl-1 = <&i2c3_c_2_sleep>;
+
+			/* TODO: this should be used by the Cypress TMA140 touchscreen */
+		};
+
+		mcde@a0350000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&dsi_default_mode>;
+
+			dsi@a0351000 {
+				panel {
+					/* NT35510-based Hydis HVA40WV1 */
+					compatible = "hydis,hva40wv1", "novatek,nt35510";
+					reg = <0>;
+					/* v_lcd_3v0 2.3-4.8V */
+					vdd-supply = <&ab8500_ldo_aux4_reg>;
+					/* v_lcd_1v8 1.65-3.3V */
+					vddi-supply = <&ab8500_ldo_aux6_reg>;
+					/* GPIO 139 */
+					reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&display_default_mode>;
+					backlight = <&gpio_bl>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	/*
+	 * This extends the MC0 default config to include DAT32DIR
+	 * which is used by this machine. If we don't do this the
+	 * SD card does not work.
+	 */
+	sdi0 {
+		mc0_a_1_default {
+			default_mux {
+				function = "mc0";
+				/* This machine uses the DAT31 pin */
+				groups = "mc0_a_1", "mc0dat31dir_a_1";
+			};
+			default_cfg5 {
+				pins = "GPIO21_AB3"; /* DAT31DIR */
+				ste,config = <&out_hi>;
+			};
+		};
+	};
+
+	mcde {
+		dsi_default_mode: dsi_default {
+			default_mux1 {
+				/* Mux in VSI0 used for DSI TE */
+				function = "lcd";
+				groups = "lcdvsi0_a_1"; /* VSI0 for LCD */
+			};
+			default_cfg1 {
+				pins = "GPIO68_E1"; /* VSI0 */
+				ste,config = <&in_nopull>;
+			};
+		};
+	};
+
+	/* Two GPIO lines used by the display */
+	display {
+		display_default_mode: display_default {
+			skomer_cfg1 {
+				/*
+				 * OLED DETECT or check_pba, this appears to be high
+				 * on "PBA" which I guess is "prototype board A".
+				 */
+				pins = "GPIO93_B7";
+				ste,config = <&gpio_in_nopull>;
+			};
+			skomer_cfg2 {
+				pins = "GPIO139_C9";
+				/*
+				 * MIPI_DSI0_RESET_N resets the display, leave high
+				 * (de-asserted) so we only assert reset explicitly
+				 * from the display driver.
+				 */
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	backlight {
+		gpio_backlight_default_mode: backlight_default {
+			skomer_cfg1 {
+				pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	/* GPIO that enables the 2.9V SD card level translator */
+	sd-level-translator {
+		sd_level_translator_default: sd_level_translator_default {
+			/* level shifter on GPIO87 */
+			skomer_cfg1 {
+				pins = "GPIO87_B3";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO that enables the LDO regulator for the eMMC */
+	emmc-ldo {
+		emmc_ldo_en_default_mode: emmc_ldo_default {
+			/* LDO enable on GPIO223 */
+			skomer_cfg1 {
+				pins = "GPIO223_AH9";
+				ste,config = <&gpio_out_hi>;
+			};
+		};
+	};
+	/* GPIO keys */
+	gpio-keys {
+		gpio_keys_default_mode: gpio_keys_default {
+			skomer_cfg1 {
+				pins = "GPIO67_G2", /* VOL UP */
+				       "GPIO91_B6", /* HOME */
+				       "GPIO92_D6", /* VOL DOWN */
+				       "GPIO204_AF23", /* MENU */
+				       "GPIO205_AG23"; /* BACK */
+					ste,config = <&gpio_in_pu>;
+			};
+		};
+	};
+	/* Interrupt line for BMA254 */
+	bma254 {
+		bma254_skomer_default: bma254_skomer {
+			skomer_cfg1 {
+				pins = "GPIO224_AG9";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+	};
+	/* Interrupt line for light/proximity sensor GP2AP002 */
+	gp2ap002 {
+		gp2ap002_skomer_default: gp2ap002_skomer {
+			skomer_cfg1 {
+				pins = "GPIO146_D13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for NCP6914 */
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			skomer_cfg1 {
+				pins = "GPIO143_D12", "GPIO144_B13";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	/* GPIO-based I2C bus for ALPS HSCD compass */
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			skomer_cfg1 {
+				pins = "GPIO151_B17", "GPIO152_D16";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	wlan {
+		wlan_default_mode: wlan_default {
+			skomer_cfg1 {
+				pins = "GPIO216_AG12";
+				ste,config = <&gpio_in_pd>;
+			};
+		};
+		wlan_en_default_mode: wlan_en_default {
+			skomer_cfg2 {
+				pins = "GPIO215_AH13";
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+	bluetooth {
+		bluetooth_default_mode: bluetooth_default {
+			skomer_cfg1 {
+				pins = "GPIO199_AH23", "GPIO222_AJ9";
+				ste,config = <&gpio_out_lo>;
+			};
+			skomer_cfg2 {
+				pins = "GPIO97_D9";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+	vibrator {
+		vibrator_default: vibrator_default {
+			skomer_cfg1 {
+				pins = "GPIO195_AG28";	/* MOT_EN */
+				ste,config = <&gpio_out_lo>;
+			};
+		};
+	};
+};
+
+&ab8505_gpio {
+	/* Hog a few default settings */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_default>;
+
+	gpio {
+		gpio_default: gpio_default {
+			skomer_mux {
+				/* Change unused pins to GPIO mode */
+				function = "gpio";
+				groups = "gpio3_a_1",	/* default: SysClkReq4 */
+					 "gpio14_a_1";	/* default: PWMOut1 */
+			};
+			skomer_cfg1 {
+				pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4";
+				bias-disable;
+			};
+		};
+	};
+};