Merge tag 'regulator-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "Quite a lot of core work this time around, though not 100% successful.

  We gained support for runtime mode changes thanks to David Collins and
  improved support for write only regulators (ones where we can't read
  back the configuration) from Douglas Anderson.

  There's been quite a bit of work from Linus Walleij on converting from
  specfying GPIOs by numbers to descriptors. Sadly the testing turned
  out to be less good than we had hoped and so a lot of this had to be
  reverted.

  We also have the start of updates to use coupled regulators from
  Maciej Purski, unfortunately there are further problems there so the
  last couple of patches have been reverted.

  We also have new drivers for BD71837 and SY8106A devices, SAW
  regulators on Qualcomm SPMI and dropped support for some preproduction
  chips that never made it to market from the AB8500 driver"

* tag 'regulator-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (57 commits)
  regulator: gpio: Revert
  ARM: pxa, regulator: fix building ezx e680
  regulator: Revert coupled regulator support again
  regulator: wm8994: Fix shared GPIOs
  regulator: max77686: Fix shared GPIOs
  regulator: bd71837: BD71837 PMIC regulator driver
  regulator: bd71837: Devicetree bindings for BD71837 regulators
  regulator: gpio: Get enable GPIO using GPIO descriptor
  regulator: fixed: Convert to use GPIO descriptor only
  regulator: s2mps11: Fix boot on Odroid XU3
  dt-bindings: qcom_spmi: Document SAW support
  regulator: qcom_spmi: Add support for SAW
  regulator: tps65090: Pass descriptor instead of GPIO number
  regulator: s5m8767: Pass descriptor instead of GPIO number
  regulator: pfuze100: Delete reference to ena_gpio
  regulator: max8952: Pass descriptor instead of GPIO number
  regulator: lp8788-ldo: Pass descriptor instead of GPIO number
  regulator: lm363x: Pass descriptor instead of GPIO number
  regulator: max8973: Pass descriptor instead of GPIO number
  regulator: mc13xxx-core: Switch to SPDX identifier
  ...

1 files changed, 22 insertions, 6 deletions

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index f00988705408..5aa472892465 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -9,6 +9,7 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
+#include <linux/gpio/machine.h>
 
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
@@ -206,9 +207,6 @@ static const struct i2c_board_info wm1277_devs[] = {
 };
 
 static struct arizona_pdata wm5102_reva_pdata = {
-	.ldo1 = {
-		.ldoena = S3C64XX_GPN(7),
-	},
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_flags = IRQF_TRIGGER_HIGH,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
@@ -237,10 +235,16 @@ static struct spi_board_info wm5102_reva_spi_devs[] = {
 	},
 };
 
-static struct arizona_pdata wm5102_pdata = {
-	.ldo1 = {
-		.ldoena = S3C64XX_GPN(7),
+static struct gpiod_lookup_table wm5102_reva_gpiod_table = {
+	.dev_id = "spi0.1", /* SPI device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldoena", GPIO_ACTIVE_HIGH),
+		{ },
 	},
+};
+
+static struct arizona_pdata wm5102_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_flags = IRQF_TRIGGER_HIGH,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 2,
@@ -264,6 +268,15 @@ static struct spi_board_info wm5102_spi_devs[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm5102_gpiod_table = {
+	.dev_id = "spi0.1", /* SPI device name */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct spi_board_info wm5110_spi_devs[] = {
 	[0] = {
 		.modalias	= "wm5110",
@@ -366,6 +379,9 @@ static int wlf_gf_module_probe(struct i2c_client *i2c,
 					    rev == gf_mods[i].rev))
 			break;
 
+	gpiod_add_lookup_table(&wm5102_reva_gpiod_table);
+	gpiod_add_lookup_table(&wm5102_gpiod_table);
+
 	if (i < ARRAY_SIZE(gf_mods)) {
 		dev_info(&i2c->dev, "%s revision %d\n",
 			 gf_mods[i].name, rev + 1);